Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterEntry Doors in Tampa, FL | TruePane Windows & Doors
An entry door has to do two jobs in Tampa. It has to look like the front of a home, and it has to hold up when a hurricane pushes on it. The Therma-Tru impact-rated entry doors we install at TruePane Windows & Doors do both. These are fiberglass and steel door systems built around laminated impact glass and reinforced frames, tested to the same Florida High-Velocity Hurricane Zone standards we use for windows and sliders. Homeowners across Tampa, from South Tampa bungalows to Westchase new builds, choose these doors when they want a real front entrance that also satisfies permit requirements. We install them level, plumb, and square, with the perimeter sealed the way an HVHZ-rated opening should be. Call (813) 320-9346 to talk through options and schedule a free on-site measurement.
Product Overview - Entry Doors
Most entry doors sold in Florida fall into two camps: pretty doors that fail an impact test, and storm doors that look like they belong on a utility closet. The Therma-Tru impact series we install in Tampa exists to close that gap. These are fiberglass and steel entry door systems engineered to carry an impact rating, factory-finished or delivered paint-grade, with glass packages that actually work in a coastal wind zone.
The frame is the part people forget about until a storm. A door slab can be as strong as you like, but if the frame twists or the threshold lets water in, the whole opening fails. That’s why we’re particular about the frame profiles on these systems. The fiberglass and steel construction resists the flexing you get with standard wood jambs, especially on west-facing entries in Tampa that take full afternoon sun and driven rain. Fiberglass won’t swell or rot. Steel holds its dimensions. Both accept the same hardware prep and weatherstripping details that make the door feel solid when it closes.
Glass packages include decorative impact-rated inserts, Low-E insulated glass, or no glass at all for a solid panel. Sizes go up to 48 inches wide, which covers most single entry openings in Tampa homes without jumping to a custom millwork situation. And because these come as full systems, not just slabs, the sill, weatherstripping, and hardware prep are all matched from the start.
Technical Specifications
This is a door system, not a slab on a shelf. Here’s what we order and install for homes in Tampa:
- Frame materials: Fiberglass and steel profiles, matched to the door slab for consistent expansion and load handling.
- Maximum width: Up to 48 inches wide, standard single-panel entry sizing.
- Glass options: Decorative impact glass inserts, Low-E insulated glass inserts, or solid panel with no glass cutout.
- Color and finish options: White, black, and bronze factory finishes, plus a paintable woodgrain texture for custom painted entries.
- Design pressure: Matched to your specific wind zone, up to +/-100, never overstated beyond what the configuration supports.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration, issued against Florida Building Code HVHZ requirements.
- Installation standard: Installed by TruePane Windows & Doors per AAMA 2400/2410 practice with AAMA 812 low-expansion foam perimeter sealant.
Hurricane & Compliance Performance
We don’t talk about hurricane performance in vague terms. Here’s what actually matters for an entry door in Tampa, and what these systems deliver.
Laminated Impact Glass
The glass packages on these doors use laminated impact glass with a PVB (polyvinyl butyral) interlayer. When debris hits, the interlayer holds the glass in the frame so the opening stays sealed and your house doesn’t pressurize from the inside. That’s the failure mode that blows roofs off.
Miami-Dade NOA / Florida Product Approval
Each configuration carries Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. Which numbers apply to your exact door depends on the size, glass package, and hardware. We verify those against your specific quote so your permit application has the right paperwork attached.
FBC / HVHZ Compliance
These doors are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. Tampa sits in a region where those standards apply differently by address and exposure category. We check your wind zone before we order anything.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated door systems are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. That combination simulates what a door actually goes through during a storm and after it.
Design Pressure for Your Wind Zone
Design pressure is the honest number. We match the door configuration to the wind zone the home actually sits in, with ratings up to +/-100 and never higher than the tested configuration supports. A door that’s over-specified won’t help you; one that’s under-specified won’t pass permit review.
Energy Performance
For Tampa’s cooling-season months, the Low-E and insulated glass insert options make a real difference on entries that face morning or afternoon sun. If the door is mostly about light and a view, decorative impact glass can still be specified with Low-E on many configurations. We’ll walk you through the tradeoffs.
Color & Glass Options
Most Tampa homes lean one of two directions architecturally: the white-and-bright coastal look, or the Mediterranean / Spanish revival style with dark bronze or black accents. The factory finishes on these entry doors cover both. White works on the beachy cottages in Palma Ceia and the Key West-style homes on Davis Islands. Black and bronze feel right on the tile-roof stucco homes in Bayshore Beautiful and along the bay. If you want a specific paint color, the paintable woodgrain finish gives you a real wood texture under whatever color your painter shoots, without the rot and swelling risk of an actual wood door in Tampa humidity.
Glass choice comes down to what the entry is for. A decorative impact glass insert puts light and curb appeal at the front of the house, in patterns that read more “custom home” than “storm product.” Low-E insulated glass is the pick when the entry takes direct sun and you don’t want the foyer to feel like a greenhouse by 3 p.m. The solid panel option skips glass entirely for maximum security and privacy, which we see more often on side entries and garage-to-house doors in Tampa.
Installation by TruePane Windows & Doors in Tampa
A Miami-Dade NOA product installed badly is just an expensive hole in your wall. The NOA rating depends on the entire assembly, including how the frame is set, flashed, and sealed. That’s why we handle the full installation in-house, no subcontractor roulette.
Every entry door install in Tampa starts with a pre-install inspection of the rough opening. We’re looking at the condition of the king and jack studs, the header, the threshold area for rot or termite damage, and the existing flashing. If the opening isn’t sound, we fix it before the door goes in. On older Tampa homes, especially in Seminole Heights and the 1920s bungalow neighborhoods around downtown, we regularly find opening dimensions that are off by a quarter inch or more, which is exactly the kind of thing that turns a good door into one with a gap you can feel.
We set the frame level, plumb, and square, shim it, and anchor it to the rough opening per the tested installation detail. The perimeter gets AAMA 812 low-expansion foam sealant, which seals without bowing the frame like high-expansion foam can. Our installation practice follows AAMA 2400/2410 standards for window and door installation. Then we water-test the threshold and sill, haul off the old door, and leave the entry clean.
For Tampa specifically, we account for coastal exposure classifications on homes near the bay, required HVHZ permitting documentation, and the fact that some municipal inspectors in the area will ask for the Florida Product Approval paperwork at rough inspection. We provide what your permit needs.
Frequently Asked Questions - Entry Doors
Design pressure is matched to your specific wind zone, up to +/-100 depending on the configuration, and we never specify a rating higher than what the tested assembly supports. The right number for your Tampa home depends on your address, exposure category, and the door size and glass package. Call (813) 320-9346 and we’ll confirm the exact rating for the door spec you’re considering.
Custom-configuration entry doors typically run longer than a stock door from a big-box store, because each one is built to the glass, finish, and size spec we order. Once we confirm your configuration and measure the opening, we’ll give you a firm production and install window in writing. Call (813) 320-9346 and we’ll check current lead times for the configuration you want.
Yes, most Tampa-area permit offices will ask for either the Miami-Dade NOA or the Florida Product Approval number that applies to your exact door configuration. We include those numbers on your quote and we handle the submittal paperwork as part of the project. Call (813) 320-9346 if you need documentation for a permit you’re already pulling.
Standard widths go up to 48 inches. If your rough opening is wider than that, or you need a specific glass pattern, hardware prep, or finish combination, we can spec a configuration that fits. What we won’t do is stretch a tested configuration beyond its approved size, because that voids the rating. Call (813) 320-9346 with your opening dimensions and we’ll tell you what’s possible.
Fiberglass and steel frames need very little compared to wood. Wipe the frame and threshold with mild soap and water a couple times a year, keep the weatherstripping clean and aligned, and check the sill weep holes after heavy rain. That’s about it. If a frame ever takes a serious hit from debris or shifting, call us to take a look before covering it up.
Get a Quote - Entry Doors in Tampa
If you’re replacing an entry door in Tampa, or building new and need the front door handled right the first time, let’s get it spec’d. We’ll come out, measure the opening, check the wind zone, and put a complete quote in your hands. Call (813) 320-9346 to schedule your free on-site measurement.
Written by the team at TruePane Windows & Doors, installing impact-rated windows and doors across Tampa, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
