Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Franklin Park
Custom window and door work in Franklin Park comes with a paperwork reality most Orlando-based crews miss: this is unincorporated Orange County, not city jurisdiction, and every permit runs through the county’s Building Division. We know that before we ever measure an opening. If you’re on the edges where Franklin Park parcel lines blur into Orlando-incorporated blocks, a single street can split permit authority. We verify your address line-by-line before we quote, so there’s no red tag, no re-permit wait, and no surprise on the bill. Call (813) 320-9346 for a free estimate from a team that has been doing this since 2008.
Why TruePane Windows & Doors Is Franklin Park’s Preferred Custom Windows & Doors Company
Franklin Park homeowners don’t need another contractor learning the county on their dime. Our crews work this area regularly. We know the postwar and 1960s-1970s single-family stock here, much of it still carrying original single-pane aluminum sliders and jalousie windows that can’t meet current Florida Building Code wind-load standards. We know the septic setbacks on acreage parcels that dictate where a material trailer can stage without driving over a drain field. We know the Orange County Building Division’s permit path, and we pull it correctly the first time.
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. Our Custom Windows & Doors team works to that standard on every Franklin Park job, from a single architectural grille retrofit to a full curtain wall on a shop building. Background-checked, uniformed technicians measure every opening twice. We quote manufacturer lines side by side on paper. And before the truck leaves your driveway, both manufacturer warranty layers are registered in writing under The Keystone Standard. That’s the 90-Day Done Right Promise in practice: if it isn’t right, we make it right. No paperwork fights.
Our Franklin Park customers call a live person when they call us. Not a voicemail tree, not a callback form. That matters when you’re the homeowner who remembers the last contractor who left a fogged seal and a door that binds in July. We’ll be there when we say. We’ll quote honestly. We’ll stand behind the work.
Our Custom Windows & Doors Services in Franklin Park
Custom Shape Windows
Franklin Park’s older ranches and mid-century builds often have odd openings: arched transoms, trapezoid gable vents, round porthole windows. Big-box replacement lines don’t fit those. We do. Our shop cuts radius frames, angles, and architectural shapes to match the original opening, then orders glazing built to the exact template. For Franklin Park homes, we specify argon-filled insulated glass units with low-E coatings that handle Central Florida’s UV load better than the single-pane originals ever did. If the opening is structural, we frame around it properly and pull the Orange County permit before cutting anything.
Commercial Storefront Glazing
Franklin Park has a mix of residential parcels and small commercial spots along its main corridors. A storefront with a cracked tinted panel or a door closer that’s pulled away from the jamb isn’t just an eyesore; it’s a code issue and a security hole. We install and replace storefront glazing with tempered glass that meets Florida’s impact and wind-load standards, and we coordinate the work around business hours where we can. Crews carry the right stock locally, so a measured replacement doesn’t sit waiting on a warehouse in another county.
Curtain Wall Systems
Curtain wall on a Franklin Park property, whether it’s a home addition or a commercial build-out, demands planning that starts long before glass arrives. Long-haul access on acreage parcels in this area is real: a flatbed carrying an oversized glass unit can’t always back down a narrow graded easement. We scope the delivery path at the estimate, not after the signed quote. If a crane rental is needed, it’s in the written number. We install curtain wall to manufacturer spec, with anchoring and flashing detailed for Central Florida’s afternoon convective downpours and high humidity.
Architectural Grilles & SDLs
Homeowners in Franklin Park who want the divided-light look without losing thermal performance ask us about simulated divided lites (SDLs) and interior architectural grilles. The older homes here often had true divided lites originally; recreating that character with modern insulated glass is a specialty. We match grille profiles, bar widths, and spacing to reference photos or original sash remnants. Andersen, Pella, and Marvin all produce SDL options we can quote side by side on paper, so you see exactly what you’re buying and what it costs. For energy performance on west-facing Franklin Park elevations, we typically recommend low-E coated glass behind the grilles, which cuts afternoon heat gain without changing the period look.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin Park
We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, and CGI. That matters for Franklin Park homeowners because the manufacturer warranty only holds if the install meets spec. We register both manufacturer warranty layers in writing before the truck leaves the driveway, with durations stated. If a seal fails or a sash binds, we handle the warranty claim. You don’t chase it. For Franklin Park’s older stock, we often quote Andersen’s architectural lines alongside Pella’s wood-clad options, then show you the line items so the choice is yours, not ours.
Common Custom Windows & Doors Problems We See in Franklin Park Homes
- Original jalousie and single-pane aluminum sliders with failed seals: The postwar and 1960s-1970s homes around Franklin Park frequently still have these in place. Central Florida’s UV exposure and humidity cycles break down the glazing tape and gaskets, and the frames themselves are often too racked or corroded for an insert retrofit. Full-frame replacement is the honest fix.
- City of Orlando permits pulled for a Franklin Park address: A crew dispatched from an Orlando office sometimes assumes the wrong jurisdiction. The job gets red-tagged, and the homeowner waits weeks for re-permitting through Orange County. We check the address line-by-line before we quote, because the parcel boundaries here split jurisdiction block by block.
- Leaking openings after insert retrofits over out-of-square frames: Spongy jamb shims and no flashing tape leave gaps that leak during Franklin Park’s afternoon downpours. We flash every jamb, sill, and head with butyl flashing tape, and we don’t set a window into a frame that can’t hold it square.
- Oversized glass delivered on a flatbed that can’t reach the house: On Franklin Park’s acreage lots, the driveway, easement, and turn radius all matter. A custom picture window or sliding door unit that’s 10 feet wide arrives on a truck that needs room to maneuver. If it can’t, you’re renting a crane that wasn’t in the quote. We scope that before you sign.
Pricing for Custom Windows & Doors in Franklin Park, FL
A custom shape window for a Franklin Park home typically runs $900-$2,400 installed, depending on the radius or angle work and the glass package. Architectural grilles and SDLs usually add $180-$520 per sash. A full-frame replacement of a 1970s aluminum slider with a code-compliant impact-rated unit runs $2,200-$5,800 per opening, and oversized glass panels for a shop or ADU start around $1,500 and climb with square footage and hoisting needs. If the job sits on acreage with septic setbacks or a tight easement, staging and access costs get scoped into the written number ahead of the quote. You get a line-item price, not a lump sum. Call (813) 320-9346 for a free estimate, and we’ll walk the property before we ever hand you a figure.
We Also Serve Cities Near Franklin Park
If you’re searching for Custom Windows & Doors in Franklin Park but your address sits just outside the CDP line, we serve the surrounding area too. Our crews cover Acacia Villas, Alafaya, Altamonte Springs, and Altoona, with the same line-by-line permit verification and the same written warranty registration before the truck leaves.
Serving Franklin Park, FL - Our Local Coverage Area
We’re based in the Franklin Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Franklin Park
Yes, if your address resolves to Franklin Park, the permit runs through Orange County’s Building Division, even if the house across the street is City of Orlando. The parcel line is what counts, not what the neighborhood feels like. We verify each address line-by-line before pulling anything, because along Franklin Park’s edges a single street can split jurisdiction. Call (813) 320-9346 and give us the address; we’ll check it while you’re on the phone.
Usually not on Franklin Park’s original stock. The frames are typically too racked, corroded, or out of square for an insert to seal properly, and single-pane sliders from that era don’t meet current Florida Building Code wind-load standards anyway. Installing new glass into a frame that moves costs you more in seal failures than a full-frame replacement would have. We’ll measure it and tell you straight whether the frame is worth saving. The estimate is free.
Staging is the big one. Material trailers, lifts, and flatbeds carrying glass can’t drive over a drain field or park on top of a wellhead. On larger Franklin Park parcels, that sometimes means a longer carry, a smaller piece of equipment, or a crane for oversized panels. We look at the septic plan and the access path during the estimate, not after work starts. Anything that adds cost goes into the written quote before you commit.
Franklin Park sits inland, away from the sea breeze that cools and ventilates coastal cities. That means daytime heat builds harder, thermal expansion cycles repeat more aggressively, and the UV exposure is relentless on frames, gaskets, and glazing tape. The heat-load stress is why we’re particular about low-E coatings, butyl flashing, and proper frame anchoring on Franklin Park installs. A product that holds a seal on the coast can fail here in half the time if the install details are off.
Yes, and not just for the permit. A detached structure on an acreage parcel in unincorporated Orange County still needs the same wind-load compliance as the main house, plus the access path from the road to the building has to accommodate the glass delivery. We scope the route from the street to the workshop wall, check the opening dimensions against the manufacturer’s maximum panel sizes, and quote the hoisting if the unit can’t be walked in. The permit still runs through Orange County. Call (813) 320-9346 and we’ll come measure it.
Get a Free Estimate for Custom Windows & Doors in Franklin Park
If you live in Franklin Park and you’re tired of fogged glass, binding doors, or a contractor who doesn’t know which permit office has jurisdiction, call TruePane. We’ll measure every opening twice, quote your options side by side on paper, and register both warranty layers in writing before the truck leaves. A live person answers at (813) 320-9346. We serve Franklin Park, and we’ll still be here in thirty years.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Franklin Park with a craft standard that hasn’t changed since the first pane he set.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.