Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Lighthouse Point
Custom windows and doors in Lighthouse Point are not a style decision first. They’re a materials decision. The city’s grid of saltwater canals off the Intracoastal means every frame, hinge, and jamb screw faces corrosion from all four elevations, not just the side facing the water. We’ll say it plainly: in Lighthouse Point, marine-grade stainless hardware is the baseline, not an upgrade, for any replacement that’s meant to last. A typical custom window or door job here runs $1,800 to $6,200 per opening depending on size, brand, and HVHZ rating. Call (813) 320-9346 for a square-deal estimate on yours.
Why TruePane Windows & Doors Is Lighthouse Point’s Preferred Custom Windows & Doors Company
Since 2008, TruePane has worked canal-front homes in Lighthouse Point long enough to know what fails first. It’s rarely the glass. It’s the hardware behind the trim, the frame corners, the flashing nobody sees until a reno opens the wall. Dale Kessler built this company around a rule that names it: if the pane is not true, the job is not done. That applies as much to a hidden jamb screw on a canal-facing door as to the glass itself.
Lighthouse Point homeowners call us because they’ve been burned once and are paying attention this time. Our technicians are background-checked and uniformed, measure every opening twice, and quote manufacturer lines side by side on paper. Simonton, Ply Gem, PGT, CGI. The differences get explained in writing, not hand-waved. Each job carries the Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway, plus a 90-Day Done Right Promise. If it’s not done right, we make it right. No paperwork fight. We stand behind it.
Response time to Lighthouse Point: a live person answers the phone 24/7, and most jobs in this city are scheduled within one to two weeks, with work completed in a single visit when the opening is a standard retrofit. Custom-sized impact units may take three to five weeks from manufacturer order. We’ll be there when we say.
Our Custom Windows & Doors Services in Lighthouse Point
Canal-front homes in Lighthouse Point were platted and built out mainly in the 1950s through 1970s. That stock of CBS concrete-block ranches and two-story homes left behind original aluminum single-pane windows and jalousie openings that are wholly non-compliant with current HVHZ codes. Rough openings from that era are rarely standard. That’s where custom work stops being a preference and becomes a requirement. Here’s what we do most in this city.
Custom Shape Windows
Canal-side living rooms often want a trapezoid or radius unit over a fixed picture window to catch the water light. Those are never stock sizes. We template every custom shape opening before ordering. Prices in Lighthouse Point for a custom shape impact window typically run $2,400 to $5,800 installed, depending on glass area and whether the opening needs structural reframing. Argon fill and low-E coatings are standard on our spec sheet because the humidity here fogs a cheap dual-pane unit within a few seasons.
Architectural Grilles & SDLs
Simulated divided lites (SDLs) give a 1960s ranch or a canal-front two-story the look of individual panes with an impact-rated unit behind them. In Lighthouse Point, we see a lot of Colonial and mid-century profiles where the grille pattern has to match the original exactly for curb appeal. SDL bars are installed inside the insulated glass unit on the exterior side, which keeps them away from salt spray and easy to clean. Expect to add $300 to $800 per sash depending on pattern density. We specify internal aluminum grilles with stainless connectors, not the vinyl snap-in type that warps and yellows in canal humidity.
Oversized Glass Panels
Lighthouse Point lots on the water often have wide rear elevations designed to frame the canal view. Replacing those with oversized impact glass means heavier panels, stronger frames, and careful engineering of the mullion support. A single oversized fixed panel with HVHZ approval commonly runs $3,500 to $7,500 installed. The wrong spec here is dangerous: undersized frames bow under the glass load, the seal fails, and you end up with a fogged unit facing the very view you paid to keep. We quote the load path on paper so you can see the difference between a proper reinforced frame and an inland-spec shortcut.
Commercial Storefront Glazing
Lighthouse Point has a small but real commercial footprint along Federal Highway and the marina-adjacent retail strips. Aluminum storefront systems here corrode fast in salt-laden air. We install and service commercial glazing with anodized finishes and stainless hardware as the default. A typical storefront glass replacement in the city runs $900 to $2,800 per panel, depending on size and whether it’s a standard or impact-rated lite. Curtain wall work lands higher, generally $120 to $220 per square foot for a full elevation, because the aluminum extrusion itself must be specified for coastal exposure.
Trusted Brands We Service in Lighthouse Point
TruePane is an authorized installer for more than a dozen manufacturer lines. In Lighthouse Point we quote Simonton, Ply Gem, and PGT most often because their coastal impact lines hold up to Broward County HVHZ approval and their warranty documentation is clean. CGI comes up regularly for canal-front homes that want heavy-duty aluminum impact frames. We stock common replacement hardware and parts for these brands locally, and we register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s not a courtesy. It’s the Keystone Standard, and it’s in writing on every job.
Common Custom Windows & Doors Problems We See in Lighthouse Point Homes
- Salt-seized aluminum frames. Original windows from the 1960s and 70s pit and seize within a few years because canal humidity carries salt and corrodes unprotected aluminum from every side. The sash locks up, and owners routinely bend crank handles trying to force them open.
- Rusted door hinges and jamb screws behind the trim. Even interior-facing rear doors in Lighthouse Point rust through where the hinge meets the jamb. When a lot is surrounded by canal water on two or three sides, the door hardware takes salt exposure from directions an oceanfront house never sees.
- Non-impact jalousies failing inspection. Jalousie windows are common in the older stock here and are wholly non-compliant with current HVHZ codes. Selling, refinancing, or pulling a renovation permit often triggers a required replacement that must be custom-sized to the original rough opening.
- Fogged seals from high humidity cycling. A dual-pane unit that would hold up inland can fog within five years here. Persistent humidity plus salt residue works on the edge seal. Once the desiccant inside is saturated, the only fix is a new sash.
On a canal-front home off NE 26th Ave, we replaced a 1960s jalousie opening with a custom-sized impact-rated casement from Andersen. The original aluminum frame had seized shut from salt-laden humidity, so our spec called for hot-dip galvanized flashing tape, stainless jamb screws, and a fusion-welded frame with low-E glass and argon fill. After install, the customer could finally open the window without a pry bar, and the sash no longer flakes white corrosion onto the sill.
Pricing for Custom Windows & Doors in Lighthouse Point, FL
Here’s the honest math for Lighthouse Point. A standard retrofit impact window in a typical opening runs $1,800 to $3,200. A custom shape unit adds templating and engineering, landing $2,400 to $5,800. Oversized fixed canal-view panels run $3,500 to $7,500. Architectural SDLs add $300 to $800 per sash. Marine-grade hardware, which we spec as standard on every job in this city, adds roughly 10 to 15 percent over inland-spec hardware. Skipping that upgrade saves a few hundred dollars now and replaces rusted hinges within a decade. Call (813) 320-9346 for a free estimate with line items in writing.
We Also Serve Cities Near Lighthouse Point
TruePane runs local crews into Lighthouse Point weekly, and we also cover Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those nearby cities and need custom windows or doors, the same square-deal pricing and 90-Day Done Right Promise apply. Call us and ask for the Lighthouse Point crew.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Lighthouse Point
Because canal water lies on two or three sides of most lots here, and salt-laden air moves around the structure, not just through the front elevation. We regularly open walls on interior-facing rear doors in Lighthouse Point and find hinge screws rusted through behind the trim. Marine-grade stainless hardware is cheap insurance against a failure you cannot see until the door sags or the sash binds. Call (813) 320-9346 and we’ll quote it as a standard line item, not an optional add.
Usually no, because jalousie openings from that era are cut to non-standard sizes that modern impact units don’t match. You have two paths: custom-order a unit to fit the existing opening, or modify the rough opening to accept a standard size. Custom-ordering preserves your stucco and framing and often costs less than demo and reframing. We’ll measure it twice and show you both quotes on paper before any work starts.
For most openings, a standard-size impact-rated retrofit window with vinyl or anodized aluminum frame is the lowest-cost path, around $1,800 to $3,200 per opening installed. If the opening is non-standard, a custom-sized unit will add cost but avoids reframing. The cheapest path that still lasts is to pair a budget-conscious impact window with the marine-grade hardware spec, because skipping the hardware creates a rust repair bill later. Call (813) 320-9346 for exact numbers on your openings.
The jamb screws and hinge pins go first. Standard steel fasteners hold salt moisture against the frame and rust from the inside out, so you won’t see the problem until the sash sags or the hinge tears out of the jamb. On casement and awning units, the crank mechanism is next. Within five to eight years in canal air, the hardware needs replacement and the labor to reach it costs more than the upgrade would have. We’ve seen it often enough that we stopped offering the inland spec on any job in this city.
Not meaningfully. Both cities sit in the same Florida building climate zone, so the U-factor and SHGC requirements are nearly identical. What changes in Lighthouse Point is the hardware and frame finish spec, because the canal network keeps salt humidity against the building on all sides. Pompano Beach has canal-front pockets too, but Lighthouse Point’s residential grid is so water-dense that the corrosion exposure is consistently higher across entire neighborhoods. We spec for the salt, and the U-factor takes care of itself when you choose a low-E argon-filled unit.
Call TruePane for Custom Windows & Doors in Lighthouse Point
Get a written line-item estimate for your custom windows or doors in Lighthouse Point. No change-order games, no surprise line on the bill, both warranty layers registered in writing before the truck leaves. Call (813) 320-9346 and a live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lighthouse Point and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.