Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Redington Shores
If you’re calling around Redington Shores for custom windows and doors, you’re likely dealing with something the big-box stores can’t solve: a rough opening that was cast wrong in 1962, a window shape nobody makes off the shelf, or corrosion that’s eaten through aluminum frames from two directions at once. TruePane Windows & Doors handles these jobs every week in Redington Shores. Call (813) 320-9346 and you’ll get a live person who knows what a jalousie rough opening looks like, not a call center reading a script.
Why TruePane Windows & Doors Is Redington Shores’s Preferred Custom Windows & Doors Company
We’ve been doing Custom Windows & Doors work long enough to know that Redington Shores is not like the mainland. The island is often just a few blocks wide. Every house gets salt air from the Gulf on one side and Boca Ciega Bay on the other, and that changes what you can put in an opening and expect to last. Dale Kessler started TruePane in 2008 after watching too many warranty claims go void because the paperwork wasn’t registered or the frame wasn’t anchored to code. Our crew works the way he trained them: measure twice, quote the numbers on paper, register both warranty layers before the truck leaves.
Our Custom Windows & Doors Services in Redington Shores
Custom Shape Windows
Arched transoms, radius tops, angled frames that follow a roofline. Redington Shores has plenty of mid-century cottages with window shapes that don’t exist in a catalog. We measure the actual opening, shim profile and all, and have the unit fabricated to fit that opening. Not the closest stock size. The opening. If the block is out of square a quarter inch over forty inches, we account for it before the glass is cut.
Impact-Rated Glazing (PGT WinGuard, CGI Impact Series)
In Redington Shores, impact glazing isn’t a preference. Florida Building Code wind-borne debris requirements apply across the barrier island, and given the direct Gulf frontage, storm surge and Category-level winds hit with almost no inland buffering. We install PGT WinGuard and CGI Impact Series systems anchored into CBS block with stainless steel jamb anchors and marine-grade flashing. The product selection matters only if the anchoring is right. Out-of-square anchor points crack stucco and fail wind-load inspection. We core the block, shim it true, and anchor to spec.
Oversized Glass Panels
Some owners in Redington Shores are replacing old jalousie walls with full-height fixed glass or oversized sliders to open the view toward the water. Glass panels over roughly 40 square feet are a different animal: heavier lites, thicker laminate interlayers, stiffer frame systems. We pre-plan the lift and the frame anchoring with the panel weight in hand, not on a guess. If the panel needs to be custom-cut with a radius corner, we do that too.
Architectural Grilles & SDLs
Simulated divided lites and architectural grilles give a new impact window the look the house was built with. That matters in Redington Shores, where a 1950s CBS cottage can look wrong with a flat, modern lite. We match grille profile, bar width, and color to the original design language of the house. Done right, the new window reads as original, and it’s still rated for wind-borne debris.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redington Shores
We’re an authorized installer for more than a dozen manufacturer lines, and for Redington Shores work we most often specify PGT, CGI, and Simonton marine-grade units. Why those three? Because their frame alloys and seal systems hold up under the double-salt exposure this island dishes out. We stock common hardware and weatherstripping for these lines locally, so a service call usually doesn’t wait on a parts shipment from out of state. Call (813) 320-9346 and we’ll quote the brands side by side on paper, so you see exactly what you’re paying for.
Common Custom Windows & Doors Problems We See in Redington Shores Homes
- Salt-pitted aluminum frames and fogged glass. Non-marine aluminum frames on the island start pitting within three to five years. Once the seal goes, argon escapes and the insulated glass unit fogs permanently. We pull units like this out of Redington Shores openings constantly, and the frames are always worse on the Gulf-facing side.
- Undersized or out-of-square jalousie rough openings. Original rough openings in the 1950s and 1960s CBS block were cast for thin jalousie frames. A standard impact slider won’t anchor properly. We do block infill or custom-width units to make the new frame fit true, and the inspector sees a fused, sealed installation instead of a gap behind the stucco.
- Failed weatherstripping after one or two hurricane seasons. Cheap non-impact sliders lose their seal fast here. Driven rain and salt mist reach the interior sill and jambs, corroding hardware and rotting drywall. The cheap inland quote ends up costing more when the interior has to be repaired alongside the glazing.
- Code compliance surprises on older CBS structures. Pinellas County inspectors in Redington Shores routinely flag replacement windows that don’t meet wind-borne debris anchoring. If the anchoring doesn’t pass, the permit doesn’t close, and the insurance wind mitigation report won’t show the window credit you paid for.
Pricing for Custom Windows & Doors in Redington Shores, FL
The honest numbers, right here. A standard impact-rated vinyl single-hung replacement in a typical Redington Shores CBS home runs $900 to $1,400 per window, installed. An impact-rated casement or picture window with custom sizing runs $1,200 to $2,200. Oversized fixed glass panels and multi-panel slider walls typically land between $4,500 and $11,000 depending on size and glass spec. Custom radius windows run $1,500 to $3,500 depending on the geometry. If the rough opening requires block infill or reframing, that adds $300 to $800 per opening. These are Redington Shores market numbers, not national averages. Every quote is free, itemized on paper, and includes both warranty layers registered in writing before we leave the driveway. Call (813) 320-9346 for a written line-item quote.
We Also Serve Cities Near Redington Shores
We work regularly in the surrounding Pinellas County communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you own a property in one of these areas and need custom windows or impact glazing, the same specifications and standards apply. This is Custom Windows & Doors in Redington Shores territory, and we treat every job on the barrier islands with the same attention.
Serving Redington Shores, FL - Our Local Coverage Area
We’re based in the Redington Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Redington Shores
Impact windows in Redington Shores cost more than the same units in Clearwater because of the anchoring and corrosion requirements specific to the barrier island. Clearwater has an inland side with minimal salt exposure. Redington Shores has none. Every installation here requires stainless steel or hot-dip galvanized anchoring hardware, marine-grade flashing tape, and frames with corrosion-resistant alloys. The block infill and opening correction work on older CBS homes adds labor hours that a pier-and-beam mainland house doesn’t need. The price difference is the cost of materials that survive here. Call (813) 320-9346 and we’ll itemize the difference line by line.
In most Redington Shores homes with original jalousie windows, full-frame replacement is the only path that makes sense. The jalousie frames themselves are almost always corroded beyond resealing, and the rough openings are undersized for impact-rated replacements. A glass-only repair doesn’t address the frame corrosion, the wind-load anchoring, or the code compliance. We can sometimes re-glaze a non-impact jalousie for a short-term fix, but on the Gulf side of the island, that’s money spent on a window that keeps failing. Call (813) 320-9346 and we’ll tell you straight which of your windows fall into which category.
Redington Shores is in Florida’s wind-borne debris region, so the Florida Building Code requires impact glazing or an approved shutter system on any new or replacement windows. Shutters can satisfy the letter of the code in some cases, but on a barrier island with direct Gulf exposure, shutters don’t address the corrosion and sealing problems that destroy non-impact frames within a few years. Impact glass does. We recommend impact-rated glazing for Redington Shores properties because it’s the only option that solves the wind-debris, corrosion, and insurance wind-mitigation questions at the same time. Call (813) 320-9346 for a code-specific assessment of your openings.
The hidden cost we see most often is correction of the original rough opening. In older CBS structures, the block openings were cast for jalousie frames, which were thinner and mounted differently than modern impact windows. If the opening is undersized or out of square, you’re paying for block infill, saw-cutting, or custom-width units before the new frame can be properly anchored. Other hidden costs include stucco repair around the new frame, refinishing interior trim that was set for the old jalousie profile, and code-required upgrade of the anchoring hardware. A good quote accounts for these upfront. Ours does. Call (813) 320-9346 and we’ll walk your house with you and flag every one of these before you sign.
Condensation between the panes means the insulated glass unit’s seal has failed and the argon or krypton fill has escaped. On Redington Shores, we see this happen prematurely when frames made for inland climates are installed near the saltwater. Salt spray pits the aluminum and eats at the sealant bond, and within a few years the unit fogs permanently. The fix is replacement of the IGU, but if the frame itself is corroded or was never rated for marine exposure, the fog will come back. We specify marine-grade frames with sealed stainless hardware for Redington Shores specifically because the island’s double-front salt exposure kills the cheap inland spec. Call (813) 320-9346 and we’ll tell you whether your window is a warranty claim or a replacement job.
Contact TruePane Windows & Doors in Redington Shores
A live person answers our phone 24 hours a day, 7 days a week. When you call about custom windows or doors in Redington Shores, you’ll speak to someone who knows the difference between a cast block opening and a wood-framed one, and who won’t quote you a window spec that can’t survive the island. We’ll be there when we say, we’ll measure everything twice, and we’ll register both warranty layers before the truck leaves the driveway. If the pane is not true, the job is not done. Call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, providing custom window and door installation and replacement in Redington Shores.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.