Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Tequesta
Custom windows and doors in Tequesta usually means one of two jobs: replacing original jalousie or single-pane aluminum units on a 1960s-1980s CBS ranch, or specifying marine-grade impact products for a waterfront build on the Intracoastal. Either way, the salt air here decides the materials before the design does. TruePane Windows & Doors has been doing both since Dale Kessler founded the company in 2008, and we handle the Village of Tequesta’s separate municipal permit registration in-house so your job does not stall at the counter. Call (813) 320-9346 for a free estimate and a written line-item quote.
Why TruePane Windows & Doors Is Tequesta’s Preferred Custom Windows & Doors Company
Tequesta is a 2.1-square-mile peninsula village surrounded on three sides by salt water: the Loxahatchee River, the Intracoastal Waterway, and the Atlantic coast near Jupiter Inlet. Window and door frames here face bidirectional salt-air corrosion that is measurably worse than what you would see in Jupiter or Palm Beach Gardens. A company that installs the inland spec will be back in five years replacing corroded sash welds and fogged glass. We do not install the inland spec on Tequesta jobs.
Our Custom Windows & Doors crews know which elevations on a Tequesta home take the worst wind and spray. Windward openings on Intracoastal-facing lots get marine-grade flashing tape and stainless hardware as the default, not an upsell. We are an authorized installer for more than a dozen manufacturer lines including Andersen, Pella, and Marvin, and we quote them side by side on paper so you see exactly what you are buying.
Every job carries the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. A live person answers our phone 24 hours a day. No voicemail tree. No callback form. That matters when a tropical system is three days out and you need someone to look at a window that will not close.
We serve Tequesta from our South Florida office with local crews who carry Village of Tequesta contractor registration. The permit process here is different from unincorporated Palm Beach County, and we have seen out-of-area companies lose two weeks on a job because they missed that step. We do not miss it.
Our Custom Windows & Doors Services in Tequesta
Impact-Rated Window & Door Replacement
Tequesta sits at the mouth of the Jupiter Inlet, one of the most wind-exposed coastal gaps in South Florida. Palm Beach County coastal wind-load standards apply, and most original windows in the village’s CBS ranch stock do not meet them. We replace them with impact-rated units sized to the opening and flashed properly for windward elevations. If the pane is not true, the job is not done.
Marine-Grade Custom Shape Windows
Custom shape windows on waterfront homes in Tequesta need more than a pretty arch. Salt spray from both the Atlantic and the Intracoastal corrodes standard aluminum frames within years, so we specify marine-grade finishes and stainless hardware on radius, arched, and geometric units. The salt air is the designer’s constraint, and we treat it that way from the first measurement.
Commercial Storefront Glazing
Tequesta has commercial storefronts along Tequesta Drive and U.S. 1 that face the same salt exposure as the homes, and the aluminum framing shows it. We replace fogged or delaminated storefront glass, reframe corroded entry systems, and specify marine finishes where the building faces open water or major roads that get spray from Atlantic crossings. Most storefront jobs are measured twice and quoted on paper before any glass is ordered.
Oversized Glass Panels for Waterfront Openings
Newer custom builds along the Intracoastal in Tequesta are designed around large glass openings that maximize water views. Those panels are heavy, expensive, and unforgiving of a bad install. We handle oversized impact glass with the same conservative engineering the wind-load code requires: heavy-duty anchorage, marine-grade hardware, and perimeter sealing that survives storm surge without wicking saltwater into the rough opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tequesta
We are an authorized installer for Andersen, Pella, and Marvin, and we stock replacement parts for those lines plus several more. That means a Tequesta homeowner with a failed sash on a twenty-year-old Pella unit is not waiting three weeks for a part to ship from Minnesota. We keep high-wear hardware, stainless fasteners, and marine-grade flashing tape on the trucks that serve Tequesta, so most jobs are completed in a single visit. If a window or door we install ever fails within our 90-Day Done Right Promise window, we fix it without paperwork fights. We stand behind it.
Common Custom Windows & Doors Problems We See in Tequesta Homes
- Jalousie windows corroded shut. The original jalousie units in 1960s-1980s CBS ranches off Tequesta Drive and along Riverside Drive let salt-laden air infiltrate 24/7. The aluminum frames corrode at the jamb until the sashes seize, and eventually the glass panes rattle loose in their clips.
- White chalky corrosion and pitting on aluminum frames. Non-marine-grade frames on Intracoastal-facing custom homes develop pitting at the sash welds from Atlantic salt spray. That pitting is the first sign the frame is breathing salt, and fogged insulated glass follows within a few seasons.
- Improperly flashed impact windows wicking saltwater. We have opened up walls in Tequesta where a previous install left the rough opening unprotected on the windward side. After the first tropical system, saltwater wicked into the jamb, rotted the framing, and voided the manufacturer’s warranty.
- Fused sliding doors. Aluminum sliding doors on older Tequesta homes corrode at the track and rollers until the door will not move. On a 1970s CBS ranch off Tequesta Drive, our crew replaced a corroded sliding door that had fused shut from salt spray; the homeowner had been using the front door for two years.
Pricing for Custom Windows & Doors in Tequesta, FL
A typical impact-rated double-hung window replacement on a Tequesta CBS ranch runs $650-$1,100 per opening installed, depending on size and manufacturer. Custom shape windows with marine-grade finishes on a waterfront home run $1,200-$2,800 per unit. Oversized impact glass panels for Intracoastal-facing openings start around $3,500 and go up from there based on the structural requirements. A full-home impact window replacement on a 1,800-square-foot single-story Tequesta home typically falls between $14,000 and $28,000.
The coastal spec costs about 18-25% more than the inland spec for the same window line. That premium buys marine-grade hardware, stainless fasteners, and flashing details that survive salt air. The cheap spec costs more within a decade, because the frames corrode, the seals fail, and the manufacturer’s warranty will not cover salt-induced pitting on standard aluminum. That is not a scare tactic; it is what we replace every month in this village.
Call (813) 320-9346 for a written line-item quote. Estimates are free, there are no surprise line items on the bill, and we do not change the price once work starts unless the scope changes and you approve it in writing first. A square deal.
We Also Serve Cities Near Tequesta
Our crews serve Tequesta and the surrounding communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are in one of those areas and need the same marine-grade materials and permit-aware install we provide in Tequesta, call us and say where you are. We will send a background-checked, uniformed technician who measures twice and quotes on paper.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Tequesta
Yes. Tequesta runs its own building department, and all window and door permits go through the Village of Tequesta’s municipal process, which requires separate contractor registration with the village. Out-of-area companies routinely miss this step and lose days or weeks getting the permit issued. TruePane’s Tequesta crews carry that registration and handle the permit process in-house on every job. Call (813) 320-9346 and we will confirm your permit requirements during the estimate.
Jalousie windows fail faster in Tequesta because the village sits on a narrow peninsula surrounded on three sides by salt water, and jalousie louvers do not seal; they allow continuous salt-laden air movement through the frame. That bidirectional salt exposure from the Atlantic and the Intracoastal corrodes the aluminum jamb hardware within a few years, seizing the sashes shut. Inland Palm Beach Gardens does not have the same constant salt load, so identical jalousie windows there last considerably longer. Call (813) 320-9346 for a free estimate on replacing them with properly sealed impact units.
No. Non-impact aluminum frames, especially the original frames on Tequesta’s 1960s-1980s CBS homes, are not rated for impact loads and will not pass a Palm Beach County wind-load inspection. The frame is the weak point, not just the glass. A marine-grade impact window in Tequesta means replacing the entire unit: fusion-welded or mechanically fastened impact frame, impact-rated insulated glass, stainless hardware, and proper flashing. Reusing the old frame voids the manufacturer’s warranty and the permit. Call (813) 320-9346 for an exact quote.
Marine-grade window and door hardware is made from stainless steel or stainless-wrapped alloys that resist pitting and corrosion from constant salt exposure, while standard inland hardware is typically zinc-plated or powder-coated steel that corrodes within a few years near the coast. On Tequesta jobs we specify stainless hinges, rollers, locks, and fasteners, and we use marine-grade flashing tape at every rough opening. The cost difference is about 18-25% on the hardware line items, and in Tequesta’s salt air the inland-grade hardware will not survive long enough to make the savings worth it. Call (813) 320-9346 for a side-by-side quote.
For a standard double-hung impact window, the coastal-spec version runs $650-$1,100 per opening versus roughly $520-$880 for the inland-spec version of the same size. The coastal spec includes stainless steel hardware, marine-grade frame finishes, corrosion-resistant fasteners, and upgraded flashing at the rough opening. Within five to ten years in Tequesta, the inland-spec frame will show chalky corrosion and pitting from salt spray, the seals will start failing, and the manufacturer will not cover salt-induced damage on standard aluminum. The cheap spec costs more within a decade. Call (813) 320-9346 for a written quote with both specs side by side.
Call TruePane Windows & Doors in Tequesta
If you have original jalousie windows, a corroded sliding door, or a waterfront opening that needs marine-grade impact glass, call (813) 320-9346. We will send a background-checked, uniformed technician to measure twice, quote your options on paper, and register both warranty layers before the truck leaves your driveway. That is the Keystone Standard, and it has been how Dale Kessler has run this company since 2008. We will be there when we say, and we stand behind it.
Written by the team at TruePane Windows & Doors, serving Tequesta with marine-grade window and door installation and replacement.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.