Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Washington Park
Custom window and door work in Washington Park, FL means working inside Broward County’s High-Velocity Hurricane Zone, where every opening must carry a Miami-Dade Notice of Acceptance (NOA) for impact resistance. That changes the materials, the sizing, the permitting, and the price, and it’s why a standard window swap rarely works around here. The original 1950s-to-1970s concrete block ranches that dominate Washington Park have masonry openings sized for jalousie and single-pane aluminum units that nobody manufactures anymore. So nearly every retrofit involves custom fabrication, buck framing, and a code review before the first pane is set. Our crews do Impact Windows & Doors in Washington Park daily. Call (813) 320-9346 and a live person answers, 24 hours a day, not a voicemail tree.
Why TruePane Windows & Doors Is Washington Park’s Preferred Custom Windows & Doors Company
TruePane was founded in 2008 by second-generation glazier Dale Kessler, and our crews have been cutting glass and setting frames to true ever since. The Custom Windows & Doors work we do in Washington Park is not a sideline. It’s the core of the trade, and it shows in the details: background-checked, uniformed technicians who measure every opening twice before ordering a single frame, manufacturer quotes laid side by side on paper, and both warranty layers registered in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s the baseline on every job in Washington Park.
Homeowners in Washington Park have dealt with the aftertaste of sloppy installs before: a pitted aluminum frame here, a jalousie window seized shut there, a Washington Park Door Installation that binds every July from humidity. We hear it on half our first calls. The residential work in this town is mostly post-WWII concrete block ranch construction, which means every opening is a custom job, not a pickup from a warehouse shelf. We schedule with that reality in mind, quote manufacturer lines like Simonton, Ply Gem, and PGT side by side, and finish with silicone flashing tape and marine-grade hardware because the salt air here punishes anything less within five years. Most jobs are completed in a single visit, and every job is covered by our 90-Day Done Right Promise. If it is not done right, we make it right, no paperwork, no arguing.
Our Custom Windows & Doors Services in Washington Park
Washington Park’s housing stock dictates the work. Small concrete block ranches, original masonry openings, and a code environment that treats every window as a structural component in a storm. That’s the frame for everything we install here.
Custom Shape Windows
Round-top, hexagon, angled gable-end, eyebrow arch. Washington Park’s older homes often have a decorative front window that was mass-produced forty years ago and cannot be bought off the shelf today. We measure the opening, fabricate the shape in an impact-rated frame, and register the NOA paperwork with the finished install. The result is a window that actually matches the original sightline instead of a squared-off patch job.
Commercial Storefront Glazing
Washington Park has small commercial strips along its main roads where storefront glazing takes a beating from humidity and hurricane-force wind cycles. We replace cracked and fogged storefront glass with impact-rated laminated units, install new aluminum or marine-grade storefront frames, and finish with structural silicone glazing so the seal holds through the next storm season. Business owners here don’t have time for a storefront wrapped in plywood every September.
Curtain Wall Systems
For the larger commercial and multi-story structures in and near Washington Park, curtain wall replacement is a code-driven specialty. HVHZ standards require glass, anchors, and mullions that resist both wind pressure and missile impact. We quote the assembly line by line, register every warranty layer, and pull the permit before work begins. The system is engineered, not guessed at.
Architectural Grilles & SDLs
Simulated divided lites (SDLs) and architectural grilles give a Washington Park ranch a traditional look without sacrificing impact protection. We install grilles between the glass panes or applied to the exterior, matched to the home’s existing sightline style. For homeowners who want the curb appeal of divided lite without the maintenance of true muntins, it is a practical upgrade that reads as original from the street.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Washington Park
We are an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows. For Washington Park specifically, we quote PGT and CGI impact-rated units most often because their NOA documentation is straightforward and the frames hold up to salt air better than entry-level aluminum. We also service Simonton and Ply Gem for homeowners who want a mid-range vinyl option with a strong warranty. We stock common hardware and weatherstripping for these brands locally so repairs can be completed without a week of waiting on freight.
Common Custom Windows & Doors Problems We See in Washington Park Homes
- Corroded aluminum frames from salt air. Standard aluminum window frames near the coast develop pitting and seized sash channels within 5-7 years. Once the frame itself is compromised, the NOA impact rating is void and the entire unit must be replaced.
- Jalousie windows that cannot be repaired under code. Broward County’s current building code disqualifies jalousie glass as hurricane protection. A broken pane forces a full opening replacement with an NOA-rated impact assembly, not a repair.
- Mismatched rough openings in 1950s-1970s block homes. Modern impact-rated windows do not fit the original masonry openings in Washington Park’s ranch homes. Without custom buck framing and flashing tape, the new unit develops seal failure around the jamb within a few hurricane seasons.
- Fogged insulated glass from sealant breakdown. Year-round humidity and UV intensity degrade the edge seal on cheaper insulated glass units faster in Broward County than almost anywhere in Florida. Once the seal fails, the unit fogs and the insulating value is gone.
Pricing for Custom Windows & Doors in Washington Park, FL
A custom impact-rated window in Washington Park runs $900 to $2,400 per opening installed, depending on size, shape complexity, and whether buck framing is required. Standard rectangular replacement windows fall at the lower end of that range; arched tops, oversized panels, and openings that need masonry modification run higher. Commercial storefront glass replacement typically starts around $1,800 for a standard storefront bay and rises with glass thickness and frame work. The price gap between a coastal-spec installation and an inland-spec one is real. The cheap spec uses standard aluminum hardware and basic sealant, which fails within a decade here. The coastal-spec version uses marine-grade stainless hardware, fusion-welded frames, and silicone glazing. It costs more on the front end and less by year ten. We quote both on paper, show you the difference, and let you choose with the numbers in front of you. Call (813) 320-9346 for a free written estimate. No surprise line items on the bill.
We Also Serve Cities Near Washington Park
Our custom window and door crews serve Custom Windows & Doors in Washington Park plus the surrounding communities of Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If your home sits just outside the Washington Park boundary, you are still inside our regular service route.
Serving Washington Park, FL - Our Local Coverage Area
We’re based in the Washington Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Washington Park
Broward County’s current building code disqualifies jalousie windows as hurricane protection for homes in the High-Velocity Hurricane Zone, which includes all of Washington Park. A permit repair on a jalousie opening is not permitted, so any work requires replacing the entire opening with an NOA-rated impact assembly. That is not a contractor preference, it is the code. Call (813) 320-9346 for a quote on a compliant replacement.
Yes, every window and door replacement in a Washington Park home requires a permit, because the town falls entirely within Broward County’s High-Velocity Hurricane Zone. The municipality enforces NOA documentation on every impact-rated opening. Our crews pull the permit, schedule the inspection, and register the manufacturer warranty layers in writing before the job is closed out.
Fusion-welded vinyl and marine-grade aluminum hold up dramatically better than the standard aluminum frames installed in the 1960s and 1970s. Standard aluminum pits and seizes within 5-7 years in Washington Park’s salt air. We specify marine-grade stainless steel hardware and silicone flashing on every affected opening. For budget-conscious homeowners, a quality vinyl frame from Ply Gem or Simonton also resists corrosion well.
Yes, but it requires structural evaluation first. A concrete block load-bearing wall from the 1950s needs an engineered header and often custom buck framing to accept an oversized impact-rated glass panel. We assess the opening, size the header, and fabricate the panel to the exact masonry dimensions. Oversized glass panels are a staple of Washington Park jobs because the original openings were so small.
Three reasons: the NOA-rated glass is more expensive to fabricate, the hardware and frame must be marine-grade to survive salt air, and the 1950s-1970s masonry openings in Washington Park virtually always require custom sizing and buck framing. A window that drops into an inland drywall opening does not drop into a concrete block opening here. The cost difference is not markup, it is material and labor that the coastal environment demands. Call (813) 320-9346 for a line-item quote.
If you own a home in Washington Park with original windows, the most useful thing you can do is get the facts before the next storm season and consider Washington Park Window Replacement. Call (813) 320-9346 and ask for a free written estimate. A live person answers, 24 hours a day, and we will schedule a measurement at a time that works for you. The estimate is free, the pricing is upfront, and the work is done right or made right under the 90-Day Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Washington Park and the surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.