Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Westgate
Custom window and door work in Westgate usually means one of two things: replacing original jalousie or aluminum slider units that cannot meet current wind codes, or sizing a truly custom opening that standard off-the-shelf products simply won’t fit. In this unincorporated Palm Beach County CDP, where most homes are post-WWII and 1960s-70s CBS construction, the job almost always involves full-frame replacement, stucco patching, and a permit through Palm Beach County rather than a city building department. TruePane Windows & Doors has done this work across Westgate long enough to know what’s behind those walls before we open them. If you’re pricing a custom window or door project off Westgate Avenue or anywhere in the 33409 area, call (813) 320-9346 for a free estimate.
Why TruePane Windows & Doors Is Westgate’s Preferred Custom Windows & Doors Company
Our Custom Windows & Doors team has spent years working through Westgate’s particular housing stock: single-story CBS homes built between the early 1950s and mid-1980s, many still carrying the aluminum jalousie windows and single-track sliding doors they left the builder with. That matters because quoting this work correctly means knowing what a 1960s rough opening looks like once the stucco comes off. We have seen it. We plan for it.
Homeowners here tell us the same thing: they want a company that answers the phone and stands behind the work. That is how we operate. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. Every job carries our 90-Day Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers are registered in writing, with durations stated, before our truck leaves your driveway. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form.
Westgate sits outside any city’s jurisdiction, so every impact window and door replacement runs through Palm Beach County permitting. We know that process. We also know that a large share of Westgate residents hold Citizens Insurance policies, and a completed impact-window job here doubles as a wind-mitigation inspection trigger. The savings on premiums can offset monthly financing costs, which lands hard in a cost-sensitive community like this one. That’s a conversation we have at kitchen tables all over Westgate.
Our Custom Windows & Doors Services in Westgate
Custom Shape Windows
Westgate’s older CBS homes occasionally surprise people. A rounded opening here, an angled transom there, an eyebrow window over a front door that no stock unit from a big-box store will ever match. We build to the opening, not the other way around. Custom shape windows in Westgate typically run $900-$2,600 per opening depending on dimensions, glass package, and frame material, with full-frame replacement adding stucco repair and rough-opening work that we include in the written quote before we start.
Commercial Storefront Glazing
Westgate has its share of small commercial storefronts along the main corridors near Westgate Avenue and the surrounding retail strips. Storefront glazing here has to handle Palm Beach County’s inland wind zone, where design wind speeds run 140-150 mph. We install impact-rated storefront systems with Florida Product Approval, and we schedule around business hours so a storefront is not left open overnight. Most storefront glazing projects in Westgate run $2,800-$9,500 depending on lineal footage and whether the existing framing can be reused.
Curtain Wall Systems
Curtain wall work in Westgate tends to show up on the newer commercial buildings and a few larger residential additions. The engineering matters as much as the glass. We work with manufacturer engineers to size the system correctly for Palm Beach County wind loads, and we register both warranty layers in writing before the job closes out. Curtain wall projects in this area typically start around $12,000 and run upward from there based on square footage and access requirements.
Architectural Grilles & SDLs
For Westgate homeowners who want the look of divided light without giving up impact performance, SDLs (simulated divided lites) and architectural grilles are the practical answer. We install internal and applied grilles on Andersen, Pella, and Marvin lines, matched to the existing home’s style. A custom SDL package on a Westgate replacement window usually adds $180-$450 per unit, and we quote it side by side on paper so the cost difference is plain before you commit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
We are an authorized installer for more than a dozen manufacturer lines, and we quote Andersen, Pella, and Marvin side by side on paper so a Westgate homeowner sees exactly what each line costs and what the warranty covers. We also work with ViewLux for select impact-rated systems where the budget calls for it. Because we install these lines regularly, we know lead times and we know which products carry Florida Product Approval without the Miami-Dade NOA markup, which matters a great deal in Westgate’s wind zone. If you want a specific brand, tell us. We’ll build the quote around it.
Common Custom Windows & Doors Problems We See in Westgate Homes
- Jalousie windows that cannot be made compliant. The louvered glass-louver windows in so many 1950s-60s Westgate homes look original for a reason. Shutters and security film do not bring them to code. Full removal and infill or replacement with an impact unit is the only legal path, and it surprises many longtime owners. We inspect before quoting so there are no surprises after the contract is signed.
- Undersized rough openings behind the stucco. On a 1960s CBS home off Westgate Avenue, our crew pulled four original jalousie windows from a bedroom wall and found rough openings undersized by today’s standards, with interior wiring run directly beneath the sills. We re-framed to fit new impact-rated casement units with low-E glass and argon fill, then flashed and stucco-patched to match the existing finish. That is typical work here, not an exception.
- 1970s single-track sliding doors with hidden rot. Those original single-track sliders in Westgate homes often have undersized jambs and seal failures hiding behind the trim. Once the door comes out, framing rot is common. A pre-inspection catches most of it. A generic quote that skips the inspection won’t.
- Permit-triggered wind-load upgrades. Because Westgate falls under Palm Beach County permitting, an impact replacement job often triggers a wind-load review that forces full-frame replacement rather than a retrofit insert. That adds stucco work and rough-opening modifications that cheaper quotes miss until the wall is open. We write it into the contract up front, with allowances, so the price doesn’t move on you mid-job.
Pricing for Custom Windows & Doors in Westgate, FL
Here are honest ranges for what we charge in Westgate. A custom shape window runs $900-$2,600 installed. Oversized glass panels, which several Westgate homes use to open up a back wall or enclose a patio, start around $1,800 per panel and climb with size and impact requirements. Architectural grilles and SDLs add $180-$450 per unit. A full jalousie-to-impact replacement on a typical three-bedroom Westgate home runs $6,500-$14,000 depending on window count, rough-opening work, and stucco repair.
What moves the number: full-frame versus insert, wind-load upgrades triggered by the county permit, stucco patching around new frames, and whether the homeowner wants argon fill and low-E coatings. We quote all of it on paper, with allowances written into the contract for anything hidden inside the wall. Call (813) 320-9346 for a free estimate. We do not give a range and then bill a different number.
We Also Serve Cities Near Westgate
TruePane serves homeowners throughout the Westgate area, including Westgate and the surrounding communities. We regularly schedule work in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. Dispatch and scheduling for these local jobs is coordinated from our Miami (South FL) office, and our crews serve Westgate directly. If you’re in a neighboring community and pricing custom windows or doors, the same free estimate applies.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Westgate
Jalousie windows cannot be brought into compliance with Palm Beach County’s current wind-load requirements through retrofit methods like security film or storm shutters. The louvered glass design simply does not meet the structural standard, regardless of what gets added to it. The only legal path is full removal and infill or replacement with an impact-rated unit. This fact catches many longtime Westgate homeowners off guard, which is why we inspect before quoting so the conversation happens early. Call (813) 320-9346 if you want us to look at yours.
Westgate is not inside any city’s building jurisdiction, so every impact window and door replacement permit runs through Palm Beach County rather than a municipal building department. That changes the review triggers, the wind-load documentation required, and the timeline. We handle the county permitting on every job, and we pull permits and pass inspections as standard practice. The permit process is not an add-on fee we spring later.
Yes, in most cases. When an impact window and door replacement is completed in a Westgate home, the work triggers a wind-mitigation inspection, and the findings are reported to your insurer. For Citizens Insurance policyholders, documented impact-rated glazing and verified roof-to-wall connections can produce premium reductions large enough to offset monthly financing costs on the project. We recommend asking your agent for a wind-mitigation inspection before and after the work so the savings are documented. Call (813) 320-9346 for a free estimate and we’ll walk you through what the inspector looks for.
We re-frame the opening to fit the new unit. This happens constantly in Westgate’s 1950s-80s CBS homes, where original rough openings were built to old framing standards and often sized for jalousie or thin aluminum frames. The work involves reframing, flashing, and stucco patching to match the existing wall finish. We write allowances into the contract for exactly this scenario, and any additional price is approved by you in writing before we touch it. No surprise line items.
Fog between the panes means the insulated glass unit’s seal has failed, and that is not repairable in place. The glass unit has to be replaced, or if the frame is original 1970s single-track aluminum from a Westgate home, the smarter move is often full door replacement because the undersized jambs and worn tracks are not worth reinvesting in. We quote both options separately so you can compare the numbers. A new impact-rated sliding door in Westgate runs $2,400-$6,800 installed depending on size and finish, and the free estimate comes with both paths spelled out.
Contact TruePane Windows & Doors in Westgate
If you are pricing custom windows or doors for a Westgate home, we will give you a written line-item quote and explain exactly what the county permit will require. The estimate is free. The work is covered by our 90-Day Done Right Promise, and both manufacturer warranty layers are registered in writing before the truck leaves your driveway. Call (813) 320-9346 and ask for a free estimate on your custom window or door project in Westgate. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.