Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Bithlo
Door installation in Bithlo, FL typically runs $400-$2,800 for a standard entry door and climbs higher when wind-rated glazing, manufactured-home fastening systems, or rough-opening reframing enter the picture. Most jobs take one day once materials land, though permit-required work in unincorporated Orange County can add time. If you’re comparing bids, call (813) 320-9346 and we’ll give you a written line-item quote before any work starts.
We work throughout Bithlo regularly, from acreage lots off Colonial Drive down to the older mobile home parks near State Road 50. What sets our crews apart here is simple: we know the housing stock. Most of these openings are not standard, and the county code path is not, either. We scope that before quoting, not after.
Key Takeaways:
- Entry door replacement in Bithlo typically runs $400-$2,800; impact-rated units start around $1,200.
- Manufactured homes here almost always need specialty rough-opening sizing and fastening, not a big-box slab hung in an old jamb.
- A door permit in unincorporated Orange County can trigger wind-load compliance on existing jalousie windows.
- We register both manufacturer warranty layers in writing before the truck leaves your driveway.
Why TruePane Windows & Doors Is Bithlo’s Preferred Door Installation Company
We have been at this a long time. Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. That applies to the slab, the jamb, the threshold, and the flashing around the opening. Bithlo customers call us because they want a square deal and a door that swings right in January and July alike.
We pull permits, we talk to Orange County inspectors, and we know what they will flag on a Bithlo manufactured home before we write the quote. That is not marketing. That is forty-two years of community service and a second-generation glazier’s craft tradition. Dale still checks quotes on manufactured-home openings personally because those are the jobs that burn people. Calls from Bithlo come to a live person around the clock, and our background-checked, uniformed technicians show up when they say they will.
Every job carries the 90-Day Done Right Promise. If the install is not done right, we make it right. No paperwork fights, no arguing. Both manufacturer warranty layers get registered in writing, durations stated, before our truck leaves your driveway. That is The Keystone Standard. It matters more on an acreage lot in Bithlo, where a failed door seal means a long drive back for anyone who has to redo the work.
Our Door Installation Services in Bithlo
Entry & Swing Doors
A proper entry door on a Bithlo manufactured home rarely means pulling a standard 36×80 slab off the shelf. Older single-wides and double-wides from the 1960s through 1980s have rough openings that run narrower, shorter, or both, and they lack conventional wood-stud blocking for anchors. We measure every opening twice, order or mill to the actual dimensions, and use fastening systems rated for mobile-home wall construction. Expect $400-$1,600 for a non-impact unit and $1,200-$2,800 for wind-rated entry doors on manufactured home applications.

Double & French Doors
French door installations on Bithlo acreage lots often involve widening an opening, which brings septic and well setbacks into play. Orange County requires minimum clearances from drain fields and wellheads, and on a two-acre lot those distances can kill a planned 72-inch opening. We check the setback map before we quote, not after you have signed. Installed double and French door units typically run $1,800-$4,200 in Bithlo depending on glazing and frame work. See our full Door Installation team’s process for how we scope openings.

Bifold & Folding Doors
Bifold and folding door systems make sense on Bithlo properties where a homeowner wants to open a living space onto a covered porch or lanai. The issue here is wind-load rating. Because Bithlo sits in the low-lying inland eastern corridor of Orange County with no coastal-water moderation, any opening over a certain width must meet current FBC wind-pressure ratings. We spec impact-rated folding systems accordingly. Budget $2,500-$5,500 installed for most Bithlo folding door applications.

Pivot Doors
Pivot doors are less common on manufactured homes because the floor systems and wall anchors do not support the weight the way a CBS slab does. On site-built concrete block homes in Bithlo, a pivot entry door can work well if the header is engineered correctly. We see inquiries from homeowners on larger lots who want a statement entry. Expect $3,000-$7,000 depending on slab size, glazing, and hardware. We will tell you straight if a pivot door is a bad fit for your structure.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bithlo
We are an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, and PGT. For Bithlo manufactured-home openings, we frequently spec Milgard outswing units and PGT impact-rated doors because they offer the size flexibility and wind-load ratings those rough openings require. We also work with ES Windows when a homeowner wants a specific glass package. We stock common replacement hardware and weatherseal components for faster turnaround on Bithlo jobs, so you are not waiting on a parts shipment from out of state.
Common Door Installation Problems We See in Bithlo Homes
- Reusing the old manufactured-home jamb with a standard 36×80 door. The rough opening is non-standard and lacks conventional wood-stud blocking, so the new slab twists and gaps within a year. We re-frame the opening properly and use mobile-home-rated fastening systems.
- Skipping impact-rated glazing on a permit. County inspectors flag the opening, then the homeowner discovers that all jalousie units in the home become subject to the same wind-load upgrade. We flag this compliance cascade before any contract is signed.
- Installing a slab door without re-flashing the low-sill opening. Bithlo’s heavy seasonal rains back up against the threshold and rot the subfloor or band joist. We re-flash with butyl tape around the entire opening, every time.
- Not checking septic and well setbacks before widening a door for a French unit. Orange County requires minimum clearances to drain fields and wellheads that can force a complete redesign. We check the setback map as part of the quote.
Pricing for Door Installation in Bithlo, FL
Here are straight ranges for Bithlo work, based on what we have actually quoted and installed in this community:
| Service | Typical Range in Bithlo |
|---|---|
| Entry or swing door (non-impact) | $400-$1,600 |
| Entry or swing door (impact-rated) | $1,200-$2,800 |
| Double or French doors | $1,800-$4,200 |
| Bifold or folding door system | $2,500-$5,500 |
| Pivot door (site-built homes) | $3,000-$7,000 |
| Storm door | $350-$900 |
What moves the number on a Bithlo job: manufactured-home versus site-built construction, whether the opening needs reframing, the wind-load rating required by the current FBC, and whether the permit path triggers jalousie window compliance. We give the line-item price up front, in writing, with no surprise add-ons on the bill. Call (813) 320-9346 to schedule a free estimate. We will measure, check setbacks, and hand you the exact quote.
We Also Serve Cities Near Bithlo
Our crews regularly work the surrounding east Orange County corridor. That includes door installation jobs in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If your property sits just outside Bithlo’s unincorporated boundaries, we can still handle the permit path and the install. Ask when you call (813) 320-9346.
Serving Bithlo, FL - Our Local Coverage Area
We’re based in the Bithlo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Bithlo
Because the county applies the current Florida Building Code wind-load requirements to the entire opening system when a permit is pulled, and jalousie windows are explicitly non-compliant with those wind-load ratings. Once the inspector sees jalousies adjacent to a new door opening, the compliance obligation can extend to all jalousie units in the home. We walk Bithlo homeowners through exactly what the permit path will require before we submit anything, so there are no surprise line items later. Call (813) 320-9346 for a straight conversation about your specific home.
Usually not. The original frames on 1960s-1980s mobile homes and manufactured homes in Bithlo are built for non-standard rough openings and lack conventional wood-stud blocking for proper anchoring. A new slab hung in that old jamb will twist, gap, and bind within a season. We re-frame the opening with mobile-home-rated fastening systems and install a door that actually fits. This is one of the most common fixes we do in Bithlo.
Bithlo sits in Orange County’s wind-borne debris region, so any permitted door replacement must meet the current FBC wind-pressure rating for the specific opening and exposure. A qualified installer can determine the exact rating from your home’s location and the opening’s orientation. We spec the correct impact-rated unit as part of every Bithlo quote we write, so you do not under-build an opening the county will flag.
Yes. Orange County enforces minimum clearances from drain fields and wellheads, and expanding an exterior opening can put your new doorway inside those setback boundaries. We check the county setback map before we quote a widened opening, so you know whether the planned upgrade is even workable before you spend money on design. Call (813) 320-9346 and we will run the setback check on your lot.
Bithlo’s low-lying inland location, intense UV exposure, and high ambient humidity accelerate door-sweep and weatherseal deterioration faster than the same components would degrade even 20 miles west in shadier, higher-elevation suburban Orlando. The sun here is unrelenting, and the humidity attacks seals year-round. We stock replacement sweeps and seals at a heavier grade for Bithlo jobs, because the standard big-box sweep will not survive a full wet season.
Building on acreage around Bithlo changes the entire scope of a door job. This is county-permitted work, not city-permitted, which means Orange County code enforcement, county inspectors, and county setback rules. Septic and well clearances matter. Long material hauls and open-lot access matter. Outbuildings, shops, and detached ADUs on the property can share utility setbacks with the main house. Grading and drainage on an open lot affect how water moves against a low-sill door. We scope all of that before we quote, because the price on acreage is never just the price of the door.
Our tech just finished a door-and-window opening overhaul on a 1970s single-wide off Colonial Drive, where the original hollow-core exterior door had rotted at the jamb and the adjoining jalousie windows had long since lost their seal. We re-framed with fusion-welded impact-rated glazing, re-flashed with butyl tape around the opening, and installed a Milgard outswing entry door, then walked the owner through the county permit chain that had triggered the jalousie compliance work. That is the job, done the way it should have been done the first time.
If you live in Bithlo and you need a door installed, replaced, or just looked at by someone who understands manufactured-home openings and county code, call (813) 320-9346. A live person answers. We will schedule your free estimate, measure every opening twice, check your setbacks, and put the line-item price in writing before anything is signed.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Bithlo and the surrounding Orange County corridor.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After