Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Clearwater
Door installation in Clearwater means building for salt air, wind code, and forty-year-old concrete block openings. Our crews work the whole Pinellas side of the bay from Clearwater Beach to Countryside, and we’ve learned which frames and hardware actually hold up here. The short answer on cost: a standard entry door replacement in Clearwater runs $1,400 to $3,800, and a true impact-rated system starts around $4,000 and climbs from there. Call (813) 320-9346 for a free estimate and we’ll give you line-item numbers on paper, not a guess over the phone.
Why TruePane Windows & Doors Is Clearwater’s Preferred Door Installation Company
We’re not a franchise that discovered Pinellas County from a map. TruePane has been installing doors and windows in Florida’s coastal zones long enough to know that a door hung near the water fails differently than one hung twenty miles inland. The hardware corrodes first. The jamb rots from the bottom. The glass seal goes cloudy from UV and humidity. Most contractors know how to swap a slab. We know how to build the opening so the next door lasts twice as long.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you’re paying for before anything gets ordered. And we register both warranty layers in writing before the truck leaves your driveway. That’s the Keystone Standard, and it’s not optional here. If we miss something, the 90-Day Done Right Promise means we come back and fix it. No paperwork arguments, no fine print.
Dale Kessler founded this company because out-of-true installs and voided warranties were problems worth fixing permanently. That principle governs every door we hang in Clearwater.
Our Door Installation Services in Clearwater
Entry & Swing Doors
Most Clearwater homes from the 1950s through the 1980s still have their original steel or wood entry doors. The steel rusts at the bottom rail within a few years of salt exposure. The wood swells in summer humidity and binds at the latch. We install fiberglass and marine-grade aluminum entry doors with stainless steel hinges, fusion-welded frames, and compression weatherstripping that doesn’t flatten in the heat. A standard single entry door replacement in Clearwater typically runs $1,600 to $3,200, depending on whether the jamb comes out too. If you’re west of Highland Avenue and within a mile of the Gulf, we specify all stainless hardware. It costs more up front and saves a callback in three years.
Storm Doors
Storm doors do two jobs in Clearwater. They protect your primary entry door from wind-driven rain and salt spray, and they add a layer of ventilation when humidity inside the house gets stale. The mistake we see most often is a storm door hung on a rotted jamb. It doesn’t matter how good the storm door is if the frame behind it is soft. We replace the jamb, flash the opening, then set the storm door on stainless hinges with a closer rated for exposure. Clearwater storm door installation runs $900 to $2,300 for a standard opening. If you’re on the barrier island, expect the upper end because the closer and hardware need to be coastal-grade.
Double & French Doors
Double doors in Clearwater fail at the meeting stile. Salt air corrodes the flush bolts and the astragal, then the doors start to sag and the center doesn’t align. We replace French doors with fiberglass or aluminum-clad units that have adjustable hinges and stainless hardware throughout. For a standard 6-foot double door opening, Clearwater pricing runs $3,500 to $7,500. If both panels are impact-rated and the rough opening needs masonry anchoring work, you’re looking at $6,000 to $10,000. The masonry anchoring is the part that doesn’t show up on generic national pricing guides.
Bifold & Folding Doors
Folding door systems are a different animal in Clearwater than they are inland. The weight of multi-panel glass doors puts more load on the overhead track, and salt air eats cheaper tracks and rollers inside two years. We install fusion-welded frames, stainless roller assemblies, and sills that drain properly when summer storms push water sideways. A quality bifold door installation in Clearwater runs $4,500 to $9,000 across the standard opening sizes. The gap between a cheap track and a coastal-spec track is usually $1,200 to $2,000, and the cheap one will bind and groan inside eighteen months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clearwater
TruePane is an authorized installer for Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows, among others. For Clearwater specifically, we carry and recommend marine-grade lines from Andersen, Pella, and Marvin alongside impact-rated PGT and CGI for openings that face the Gulf. We stock replacement hardware, weatherstripping, and sill pans locally, so common parts don’t mean a two-week wait. If your current door came from one manufacturer and you’re switching to another, we’ll draw both spec sheets side by side so you can compare the glazing, the finish, and the warranty before you spend a dollar.
Common Door Installation Problems We See in Clearwater Homes
- Corroded hinges and threshold screws. Standard steel hardware near the Gulf rusts within two to four years. The door sags, the latch misses the strike plate, and the threshold screws crumble when you try to adjust them. We replace with stainless steel or marine-grade coated fasteners.
- Rotted wood jambs on west-facing openings. Wind-driven rain and constant humidity rot wood jambs from the bottom up, even when they’ve been painted. A fiberglass or fusion-welded frame with a properly flashed sill eliminates the failure point.
- Fogged side lites and glass panels. Non-fusion-welded frames allow moisture to wick through concrete-block openings. The glass seal fails, you get condensation between panes, and the low-E coating starts to degrade. If the pane is not true, the job is not done.
- Improper masonry anchoring. Clearwater’s CBS construction needs anchors and screws designed for concrete block, not wood studs. A door hung on drywall screws into block will pull loose within a season. We use the right fasteners and seal the anchors against moisture intrusion.
Pricing for Door Installation in Clearwater, FL
Here are honest ranges for the Clearwater market. A standard entry door replacement runs $1,400 to $3,800. Impact-rated entry doors start around $4,000 and reach $8,500 for large openings with side lites. Storm doors run $900 to $2,300. Double or French door replacements run $3,500 to $10,000 depending on size and impact rating. Bifold and folding doors run $4,500 to $9,000. The price gap between inland-spec and coastal-spec hardware is real: marine-grade stainless hinges, fusion-welded frames, and impact glazing add $700 to $2,000 on the front end, but they prevent the $1,500 hardware replacement that a cheap install needs within a decade. We give written line-item quotes, we register both warranty layers in writing, and we don’t add surprise line items. Call (813) 320-9346 to schedule a free estimate.
| Service | Clearwater Price Range |
|---|---|
| Entry door replacement (fiberglass, standard) | $1,400 - $3,800 |
| Impact-rated entry door (full system) | $4,000 - $8,500 |
| Storm door installation | $900 - $2,300 |
| Double / French door replacement | $3,500 - $10,000 |
| Bifold / folding door system | $4,500 - $9,000 |
We Also Serve Cities Near Clearwater
Our Door Installation crews cover Clearwater and the surrounding Pinellas peninsula. We also run regular jobs in Largo, Belleair Beach, Safety Harbor, and Dunedin. If you’re anywhere in Clearwater or the neighboring communities, the same pricing, warranty registration, and standards apply.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Clearwater
Yes. Virtually every property in Clearwater falls inside a wind-borne debris region, so any new door or replacement opening must meet Florida Building Code impact standards or be paired with approved storm protection. There is no inland exemption on the Pinellas peninsula. A door that isn’t impact-rated can fail a local inspection and delay your project. Call (813) 320-9346 and we’ll match the right impact rating to your specific zone and opening.
Yes. Properties seaward of the Florida DEP Coastal Construction Control Line, which includes most of Clearwater Beach and the barrier island, require a separate state permit before any exterior opening work can begin. Skipping that step can void the local building permit and add weeks to the finish date. We handle the paperwork as part of the job. Call (813) 320-9346 and we’ll check your property’s status before we quote.
Yes. Fiberglass doesn’t absorb moisture the way wood does, and it doesn’t corrode the way steel does. In Clearwater’s salt air, a wood jamb rots and a steel door rusts at the bottom rail within a few years. A fiberglass door with stainless hardware and a fusion-welded frame is the practical long-term choice. The cost difference over a wood door is small; the difference in lifespan near the Gulf is measured in decades.
Sometimes the slab can be swapped, but in Clearwater the jamb is usually the problem. Salt air corrodes the anchors and wind-driven rain rots the bottom of the jamb, so a fresh slab on a soft frame doesn’t fix anything. We measure the jamb. If it’s solid and square, we’ll quote a slab-only replacement. If it’s soft or out of true, we’ll recommend replacing the full unit and tell you why. Estimates are free.
A storm door in Clearwater does more than hurricane protection. It blocks wind-driven rain and salt spray from hitting your primary entry door, which extends the life of the primary door’s finish and hardware. It also lets you ventilate the house on humid days without opening the whole front entry to insects and weather. For west-facing doors near the Gulf, a storm door is cheap insurance against the conditions that eat doors fastest. Call (813) 320-9346 for an exact quote.
No. We quote in writing and we hold to that number unless the scope of work actually changes. If we open a wall and find rot or damage we couldn’t see, we stop and show you the condition before we do anything else. No surprise line items, no change orders you didn’t approve. That’s a square deal, and it’s the only way we work in Clearwater.
Most standard entry door replacements take one day. A full impact-rated system with side lites or a double door might run two days, including the masonry anchoring work. If your opening requires a Coastal Construction Control Line permit, the permit wait adds time to the schedule but not to the installation itself. We’ll give you a timeline in writing when we quote.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Clearwater with door installation built for salt air and Florida wind code.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.