Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Cooper City
Door installation in Cooper City means working within Broward County’s High-Velocity Hurricane Zone code, and that changes the conversation before the first measurement is taken. We’ve replaced corroded aluminum sliders in Rock Creek, converted jalousie openings in Stirling Lakes, and reframed undersized jambs in Flamingo Gardens, so we know the housing stock and the paperwork that goes with it. If your entry, French, or storm door is original to a home built before 1992, it almost certainly cannot be replaced in kind under current HVHZ product-approval rules. Call (813) 320-9346 and we’ll walk you through what a compliant quote actually includes before you spend a dollar.
Why TruePane Windows & Doors Is Cooper City’s Preferred Door Installation Company
Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That applies just as much to a door jamb as to glass. Cooper City homeowners tend to be long-timers, people who’ve been in the same house for twenty or thirty years and have watched original aluminum doors corrode at the bottom sweep year after year. They’re not shopping for the cheapest bid. They want someone who will still answer the phone in thirty years, and that’s exactly the kind of company we’ve built.
Our Cooper City customers see the same crew throughout the job, background-checked and uniformed, measuring every opening twice before ordering anything. We register both manufacturer warranty layers in writing before the truck leaves your driveway, which is the Keystone Standard on every job we take. The 90-Day Done Right Promise means what it says: if the work isn’t done right, we make it right. No paperwork fight, no arguing, no fine print that covers neither. A live person answers our phone 24 hours a day, not a voicemail tree.
Our Door Installation Services in Cooper City
Entry & Swing Doors
Entry door replacement in Cooper City is rarely a simple slab swap. Homes in subdivisions like Rock Creek and Stirling Lakes often have non-standard rough openings, and the original aluminum door rarely meets the Miami-Dade NOA product-approval standard insurers now demand. We order impact-rated entry doors sized to the actual opening, not the nearest catalog size, and we frame the jamb to hold the heavier glazing without sagging. Our Door Installation team handles the full reframe, flashing, and hardware set so the door swings true on the day it’s installed.
Double & French Doors
Double and French doors in Cooper City have to do two jobs: open wide for Florida living and seal tight against wind-driven rain at 140 mph design pressure. We replaced a corroded aluminum slider in Rock Creek with a Miami-Dade NOA-rated impact French door, and the original jamb was too shallow for modern impact glazing. Our crew reframed the rough opening, set a custom Ply Gem door with low-E glass and argon fill, and ran flashing tape at the sill and jambs before final inspection. The homeowner now has the documentation their insurer wanted, showing full HVHZ compliance.
Storm Doors
Storm doors in Cooper City are not the flimsy afterthought some contractors treat them as. They’re the first line against the Everglades humidity and the summer rain pattern that soaks everything east of the watershed. We set storm doors over impact-rated entry doors so you get cross-ventilation in the dry months and a second barrier in the wet ones. The bottom sweep and weatherstripping get checked against the specific exposure of your house, because a Cooper City door facing west catches more afternoon storm runoff than one facing the other way.
Bifold & Folding Doors
Bifold and folding door systems in Cooper City work beautifully on CBS construction, but the concrete block lintel above the opening has to be engineered for the wider span. We coordinate that with the Broward County permitting process so the opening is framed and flashed before the panels ever show up. No surprise line items on the bill, no second appointment left hanging.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cooper City
We’re an authorized installer for more than a dozen manufacturer lines, and in Cooper City we most often quote Andersen, Pella, and Marvin side by side on paper so you see exactly what you’re buying. We also work with ViewLux for impact-rated configurations where the manufacturer’s NOA documentation matters most for your insurer. Because our Cooper City customers often have non-standard openings, we special-order rather than force a stock size into a jamb that won’t hold it. Lead times get stated up front, in writing, and we order as soon as you approve the quote.
Common Door Installation Problems We See in Cooper City Homes
- Non-standard rough openings with original jalousie or single-pane aluminum doors. Homes built before 1992 throughout Cooper City commonly have openings sized for louvered jalousie panels that are now a permitting dead-end under HVHZ code. Every opening must convert to a Miami-Dade NOA-rated impact unit, often with custom fusion-welded frames that generic contractors overlook.
- Corroded aluminum frames and failed bottom sweeps from Everglades-adjacent humidity. Cooper City’s position at the eastern edge of the Everglades watershed means the air stays wet year-round, and aluminum door frames pay for it. We regularly see bottom sweeps that have degraded to powder and hardware that seizes within a few wet seasons.
- Doors installed without sill and jamb flashing on concrete block homes. CBS construction wicks moisture differently than wood frame, and skipping flashing tape lets wind-driven rain get behind the jamb and corrode the new hardware inside one wet season. Broward County inspectors look for it, and so do insurance adjusters.
- Standard impact doors forced into undersized existing jambs. If the jamb isn’t deep enough for impact-rated glazing, the door binds, the frame twists, and the wind-load test fails. This is the most common reason we get called to fix another contractor’s Cooper City install.
Pricing for Door Installation in Cooper City, FL
A typical impact-rated entry door replacement in Cooper City runs $2,800 to $5,500 installed, depending on the slab size, the jamb work required, and the manufacturer’s product-approval documentation. Double and French door conversions generally start around $4,200 and go to $8,500 when reframing is needed for non-standard Rock Creek or Stirling Lakes openings. Storm doors in Cooper City typically run $700 to $1,800 including installation, depending on impact rating and finish. What changes the number most is the rough opening: if it’s a standard size, the job is straightforward; if it’s a 1970s jalousie conversion, expect custom sizing and a longer lead time. We give a written line-item quote before any work begins, and the price doesn’t change once you’ve approved it. Call (813) 320-9346 to schedule a free estimate.
We Also Serve Cities Near Cooper City
Our Door Installation in Cooper City crews regularly work in the surrounding communities as well, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re nearby and dealing with the same HVHZ requirements and aging housing stock, we’ll bring the same measuring standards and the same written quote to your door.
Serving Cooper City, FL - Our Local Coverage Area
We’re based in the Cooper City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Cooper City
Cooper City falls fully within Broward County’s High-Velocity Hurricane Zone, so any replacement entry door must carry a current Florida Product Approval with a Miami-Dade Notice of Acceptance (NOA). That document proves the specific door and frame assembly passed wind-load and impact testing for the design pressure your home requires. We provide that documentation to you and your insurer before final inspection, and we register both warranty layers in writing before the crew leaves.
No. Original jalousie panels from Cooper City homes built in the 1970s cannot be replaced in kind under current HVHZ code. Every opening must convert to an impact-rated unit, and the rough openings are often non-standard sizes that require custom or special-order impact frames. A contractor who quotes you a standard impact door without measuring for the jamb depth will be back to fix it, or you’ll be calling us to do it right. Call (813) 320-9346 for an exact quote.
A compliant installation gives your insurer documented proof that the opening meets HVHZ product-approval requirements, which is exactly what carriers look for when they’re pricing your policy or reviewing a claim after a storm. We provide the NOA documentation, the permit record, and the inspection sign-off so you have a paper trail. Florida insurers have been canceling policies or demanding proof of impact protection, and a properly documented door replacement is one of the few things that works in your favor.
Yes, but the bigger factor in Cooper City is humidity control, not temperature. Modern impact-rated doors with low-E glass and proper weatherstripping seal the envelope better than a corroded 1970s aluminum jalousie ever could, which means your AC runs less and the air inside stays drier. The reference from your energy bill will be modest; the difference you’ll feel at the door on a humid August afternoon will not be.
Cooper City sits at the eastern edge of the Everglades watershed, and the sustained humidity plus wind-driven rain accelerates corrosion on aluminum frames and hardware measurably faster than in non-wetland-adjacent South Florida suburbs. If the installer skipped flashing tape or used hardware that wasn’t rated for coastal exposure, the decay starts within one wet season. We replace with impact-rated doors set in properly flashed openings with marine-grade hardware, and we stand behind the work with the 90-Day Done Right Promise. Call (813) 320-9346 for a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Cooper City and surrounding South Florida communities with a second-generation glazier’s standard since day one.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.