Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Dover
Door installation in Dover, FL usually costs between $450 and $3,800 depending on the door type, and most single-door replacements take one day on site. If you live near Gallagher Road, Sydney, or east of US-92, we can usually schedule your estimate within a few days and complete the install the same week. Call (813) 320-9346 to get a written quote with the exact line-item pricing before any work begins.
Dover is not Brandon. The housing stock here ranges from mid-century farmhouses to single-wide and double-wide manufactured homes, and those two categories require entirely different doors, jamb depths, and permitting pathways. We know because we have been replacing doors on Dover properties long enough to recognize which homes need HUD-code-compliant units and which need standard site-built framing. That knowledge keeps you from paying for a door that will never seal right.
Why TruePane Windows & Doors Is Dover’s Preferred Door Installation Company
Dale Kessler founded TruePane Windows & Doors in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That applies to doors as much as glass. A door that binds in July or swings open on its own was not set true, and we treat that as our problem to fix, not yours to live with.
We have strong reviews from Dover homeowners, particularly on manufactured-home entry door replacements and farm-adjacent properties where corrosion is a constant fight. Our techs are background-checked and uniformed. They measure every rough opening twice before ordering, and they quote manufacturer lines side by side on paper so you see what you are buying before you commit. We register both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it applies to every door we hang in Dover.
We also understand what it takes to work a tight Dover lot. No delivery staging area, no street parking, no problem. Our crews arrive prepared to park tight to the dirt apron, stage panels on sawhorses in a narrow side yard, and leave the worksite cleaner than they found it. Dispatch and scheduling are coordinated from our South Florida office, but the crews serving Dover are local and familiar with the roads, the farm operations, and the county inspection process.
Our Door Installation Services in Dover
We install entry doors, storm doors, and custom units in Dover, plus full Door Installation replacement packages. Three services matter most here given the housing stock and the climate. Each one starts with a free on-site measurement and a written quote.
Entry & Swing Doors
Entry doors in Dover take more abuse than almost anywhere else in Hillsborough County. Farm drift from strawberry and vegetable operations settles on aluminum frames and latch assemblies, and within two or three seasons the hardware begins to oxidize. We specify stainless hinges and PVC-reinforced frames on farm-adjacent lots as a matter of course. Standard aluminum components will fail early here. We would rather sell you the right door once than replace the wrong one twice.
Storm Doors
A storm door on a Dover farmhouse is doing two jobs: shedding summer downpours and shielding the primary entry from direct sun. The humidity in this part of the county never lets up from June through October, so we recommend storm door systems with thermally broken frames and full perimeter weatherstripping. For manufactured homes, the storm door must be compatible with the HUD-code rough opening and the thinner wall construction. A big-box pre-hung storm door rarely fits without modification. We handle that so you do not have to.
Arched & Custom Doors
Many of the older farmhouses along Sydney Road and the streets branching off US-92 have arched or unusually sized entry openings that were framed decades before standard door sizing existed. Replacing those doors off-the-shelf is not possible. We measure the actual opening, order a custom-arched unit from manufacturers including Andersen and ES Windows, and fabricate the jamb on site to match the original lines. The result is a door that fits the opening and the house, not a compromised retrofit with filler strips and caulk.
Pivot Doors
A pivot door is a statement piece, and a few newer Dover infill homes have opted for them. The engineering matters more than with a hinged door: the pivot point carries the full weight of the slab, and the frame must be dead level or the door drifts. We set pivot doors with a laser level and stress-test the swing before we call the job done. If a pivot door is on your list, we will show you the load calculations and the hardware specs in writing before you sign anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dover
We are an authorized installer for more than a dozen manufacturer lines, and for Dover we lean on three brands that hold up in this climate: Andersen for site-built farmhouse replacements, ES Windows for custom units and impact-rated glazing, and ECO Window Systems for manufactured-home compliant doors that do not require reframing. We keep common parts stocked for faster turnaround on Dover jobs, and because we register your warranty in writing before we leave, you will know exactly what is covered and for how long.
If you are comparing doors for a mobile home replacement, we will show you HUD-approved units side by side with standard pre-hung options on paper, with pricing, so the decision is clear. No vague “it depends,” no pressure.
Common Door Installation Problems We See in Dover Homes
- HUD rough openings that do not match store-bought doors. Manufactured homes have narrower jamb depths and thinner wall framing than site-built houses. A standard pre-hung door from a big-box store will not seal properly without reframing, and reframing a mobile home wall is not a simple fix. We order HUD-specific units with the right jamb depth the first time.
- Farm-drift corrosion on aluminum frames and latch assemblies. Pesticide and fertilizer overspray from active Dover farm fields accelerates oxidation. We have replaced aluminum door frames that were completely pitted after three seasons. On farm-adjacent properties, we specify stainless hardware and PVC-reinforced frames as standard.
- Unpermitted replacements flagged during wind-borne debris inspections. Dover sits in Hillsborough County’s wind-borne debris region, even this far inland. A door replaced without Florida Product Approval may pass a visual check for years and then fail a county inspection when you go to sell. We pull the permit, install impact-rated or shutter-protected units, and close out the inspection properly.
- Settled farmhouse jambs that are no longer square. Decades of wet-dry soil cycles in eastern Hillsborough cause older Dover homes to settle unevenly. A door jamb that is off by even a quarter inch will cause the door to bind. We shim, plane, and true every jamb before hanging the slab, and we will tell you if the settling is structural enough to warrant a foundation contractor’s attention.
Pricing for Door Installation in Dover, FL
A single entry door replacement on a Dover site-built home typically runs $900 to $2,800 installed, including the slab, jamb work, hardware, weatherproofing, and disposal of the old door. Storm doors run $450 to $1,200. Custom arched doors start around $2,200 and can reach $4,500 or more depending on the arch radius and the glazing. Manufactured-home entry doors run $700 to $1,800 for HUD-approved units with the correct jamb depth and flashing tape.
What changes the number: whether the rough opening needs reframing, whether you need impact-rated glazing, and how much corrosion repair the existing jamb requires. We give you a written fixed-price quote after the on-site measurement. The price we quote is the price you pay, no change orders. Call (813) 320-9346 to schedule a free estimate in Dover.
We Also Serve Cities Near Dover
Our Door Installation in Dover work regularly takes us to neighboring Valrico, Plant City, Mango, and Brandon. Each of those communities has different housing stock and different permitting quirks. If you are in one of those areas and searching for a Dover-based crew that understands this part of Hillsborough County, call us at (813) 320-9346.
Serving Dover, FL - Our Local Coverage Area
We’re based in the Dover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Dover
If your Dover home is a manufactured or mobile home built to HUD code, you need a HUD-approved door with the correct rough opening dimensions and jamb depth. Standard pre-hung doors are built for site-built wall thicknesses and will not seal correctly in a manufactured home, which leads to air leaks, water intrusion, and failed seals within a season or two. We will confirm your home’s classification during the free estimate and quote the correct unit the first time. Call (813) 320-9346 and we will walk you through it on paper.
We bring the materials in as close to the opening as possible, stage panels on sawhorses in whatever narrow side yard is available, and use drop cloths and a magnetic sweep to contain debris. On a single-wide off Gallagher Road, we parked the box truck tight to the dirt apron and worked the entire job from the side yard without touching the neighbors’ property. We leave the worksite swept and the old door loaded for disposal. That is the standard on every Dover job, not the exception.
Dover’s active strawberry and vegetable farming operations release pesticide and fertilizer drift that settles on aluminum door frames and hardware, accelerating oxidation far beyond what you would see in suburban Brandon. The fix is not another coat of paint. It is stainless steel hinges, PVC-reinforced frames, and marine-grade weatherstripping specified for agricultural exposure. We quote those components as standard on farm-adjacent Dover properties. Call (813) 320-9346 for an exact quote on your lot.
Yes, in most cases. Dover is unincorporated Hillsborough County, and the county requires permits for exterior door replacements, especially because this area falls within the wind-borne debris region. The permit process confirms the new door carries Florida Product Approval and meets impact or shutter-protection standards. We pull the permit, handle the inspection, and close it out. The cost is included in your quote.
Sometimes, but it depends on the existing rough opening and the condition of the original jamb. If the jamb is true and the framing is sound, we can often widen the rough opening incrementally and install a larger door while preserving the historic trim lines. If the original jamb is rotted or badly settled, we will tell you plainly and quote the full replacement. Either way, you will see the measurements and the plan in writing before any work starts. Call (813) 320-9346 to schedule a free measurement.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Dale founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. That standard still governs every door and window his crews install in Dover and across Hillsborough County.
Call (813) 320-9346 to schedule your free Dover door installation estimate. A live person answers. You will get a written fixed-price quote, the warranty terms in writing, and a crew that shows up when they say they will.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.