Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Orlando
Door installation in Orlando comes down to one thing most homeowners don’t realize until the inspector shows up: whether the crew knew how to anchor a jamb into concrete block. Most Orlando homes are CBS construction, not wood frame. That changes everything about how a door gets set, flashed, and sealed. TruePane Windows & Doors handles Orlando door installation from permit to final inspection, and we’ve done it long enough to know which details the cheap bids skip. If you’re pricing a new entry door, a storm door, or a sliding glass replacement, call (813) 320-9346 for a written estimate. We’ll tell you exactly what your wall needs before we quote it.
Why TruePane Windows & Doors Is Orlando’s Preferred Door Installation Company
We’re known around Orlando for showing up when we say and standing behind the work in writing. Dale Kessler founded this company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. That applies to door slabs, jambs, and the trim around them, not just glass. Homeowners in College Park, Baldwin Park, and Conway have called us after another contractor left a door that binds in July or a frame that shifted off the anchors within six months. We fix those, and we replace them right the first time when the job is ours from the start.
Our technicians are background-checked and uniformed. Every opening gets measured twice. Every warranty layer from the manufacturer gets registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s not a slogan. It’s a written record of what the product covers and for how long. Combined with our 90-Day Done Right Promise, it means you know what you bought and what happens if something isn’t right. No paperwork fights, no arguing.
When you call us about a door in Orlando, you get a person on the phone. Not a voicemail tree. Not a call center in another state. We dispatch from our Orlando office and serve the city directly, including Dr. Phillips, MetroWest, and the neighborhoods around Lake Nona.
Our Door Installation Services in Orlando
Entry & Swing Doors
A new entry door in Orlando has to do two jobs: close tight against 74% average humidity and meet Florida Building Code wind-load requirements. We install entry doors with masonry anchors driven into the CBS jamb, foam backer rod behind the flange, and flashing tape that keeps afternoon thunderstorms from working water into the wall. Whether you’re replacing a front door on a 1980s ranch in Pine Hills or a custom entry on a newer build in Winter Garden, the anchoring method matters more than the door slab itself.
Double & French Doors
Double doors multiply the sealing challenge. Two slabs, an astragal, and a jamb system that has to stay square through humidity cycles. In Orlando’s CBS homes, we see French doors fail where the jamb was shimmed with wood and screwed in with fasteners meant for wood framing. Within a season, the jamb creeps, the doors droop, and the weatherstrip stops meeting. We set double door units with masonry-specific anchoring and long-setting shims that don’t compress. You get a door that opens right in February and still latches in August.
Storm Doors
Orlando sits in Lightning Alley, where near-daily afternoon storms roll through from May to October. A storm door protects your primary entry door from direct rain, wind-driven debris, and the UV that fades finishes. We install storm doors sized to the opening and rated for the wind speeds Florida Building Code requires for Orlando, which is not optional even this far inland. Most big-box storm doors come with instructions written for wood-frame houses. We retrofit them for CBS.
Bifold & Folding Doors
Bifold and folding door systems are heavier than a standard swing door, and the track carries the entire load. In Orlando, that track often gets mounted to a concrete block header with anchors that are too short or too few. We install folding door systems with continuous structural support and rollers specified for the panel weight, not whatever came in the hardware bag. The result is a door that folds without dragging, even after a decade of Florida humidity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Orlando
We’re an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper. If you’ve been looking at Andersen, Pella, or Marvin doors for your Orlando home, we’ll show you what each line actually costs installed, including the anchoring and flashing work specific to CBS construction. We also provide dedicated Andersen service in Orlando with factory-trained crews and locally stocked parts. We stock common parts and hardware locally for Orlando jobs, which means a hardware failure on a Marvin hinge or a Pella astragal doesn’t leave you waiting two weeks for a part from a warehouse in another state.
Common Door Installation Problems We See in Orlando Homes
- Jambs anchored with wood-frame screws into concrete block. Handymen do it because it’s faster than installing masonry anchors. The jamb pulls away from the wall within months, the latch stops aligning, and the door either won’t close or won’t lock. We replace the anchors and reset the unit.
- Doors that bind in summer humidity. A wood door slab absorbs Central Florida moisture and expands. If the reveal wasn’t cut for that, the door sticks in July. We account for Orlando’s humidity range when we set the clearances.
- Skipped wind-load compliance on vacation rental replacements. Out-of-state owners often assume inland Orlando doesn’t need wind-rated doors. Florida Building Code says otherwise. We’ve pulled permits on jobs where the previous contractor never did, and the new door failed inspection on wind-load documentation alone.
- Sliding glass doors with stripped tracks and failed seals. Constant tenant turnover at vacation rentals near ChampionsGate and Reunion means doors get forced, tracks get sanded down by grit, and locks stop latching. By the time we get the call, the insulated glass unit is usually fogged and the frame is swollen past repair.
Pricing for Door Installation in Orlando, FL
A straightforward entry door replacement in Orlando typically runs $1,800 to $4,500 installed, depending on the slab material, glass package, and whether the jamb needs full replacement. Storm doors land between $600 and $1,800. Double French doors run $3,500 to $8,000 installed with CBS anchoring and flashing done correctly. A single sliding glass door replacement with a wind-rated unit and new masonry anchors usually falls between $2,500 and $5,500. Bifold systems can exceed $10,000 for multi-panel configurations with structural header support. Every quote we write in Orlando includes the permit, the anchoring hardware, the flashing materials, and the warranty registration, because a quote that leaves those out isn’t a cheaper door, it’s an incomplete job waiting to fail. Call (813) 320-9346 for a free, itemized estimate.
How Orlando’s CBS Construction Changes Door Installation
Most Orlando homes built during the 1980s, 1990s, and 2000s Disney-era boom are concrete block structure. Developers built entire subdivisions in Orange, Osceola, and Seminole counties this way, and tens of thousands of those homes still have their original 30-to-40-year-old door frames, many corroded from Central Florida’s hard water. Door installation in a CBS home requires masonry screws or sleeve anchors driven into the block, not wood screws into a pine jamb. The rough opening gets a foam backer rod before the flashing tape goes on, sealing the gap between the door flange and the block so that wind-driven rain can’t track inside. This is fundamentally different from the wood-frame installs most out-of-state contractors default to, and it’s the number one reason we’re called in to redo someone else’s Orlando door job.
Florida Building Code still mandates wind-speed-rated doors for all replacement work in Orlando, even though the city lies outside the Miami-Dade High-Velocity Hurricane Zone. That requirement surprises a lot of out-of-state vacation-home owners who own property near the tourism corridor but don’t live here year-round. A replacement door that doesn’t carry the required design pressure rating won’t pass inspection. The permit gets pulled, the sticker gets withheld, and the property can’t legally be rented again until it’s fixed. We’ve walked through that exact sequence with owners at ChampionsGate, Reunion Resort, and Windsor Hills, and the fix is always the same: pull the non-compliant door, install one rated for the opening’s wind zone, and document the rating in the permit file.
Last July, our crew replaced a swollen, track-stripped sliding glass door at a vacation rental in Windsor Hills with a fusion-welded frame, impact-rated glazing, and masonry anchors driven into the CBS jamb. For similar openings, our Sliding & Patio Doors in Orlando include wind-rated units built for CBS construction and rapid-turnaround installs. The management company had deferred maintenance until the lock no longer latched and a guest was arriving in 48 hours. We pulled the permit, installed the new door with backer rod and flashing tape, and the inspection passed before check-in. That’s the difference between a door company that knows Orlando’s rental market and one that’s reading the instruction manual for the first time.
For door installation in Orlando that’s done right from the start, this page explains what your CBS walls and inland wind-code requirements actually mean for your quote, including the permit and documentation steps that separate a compliant, insurance-ready install from a cheap one that fails inspection.
Trusted Brands We Service
We service and install Andersen, Pella, Marvin, and a full range of manufacturer lines for Orlando homeowners. Each brand has its own anchoring requirements, its own warranty terms, and its own failure modes in a humid, storm-heavy climate. We quote them side by side on paper so you can see what you’re buying and what the warranty actually covers.
We Also Serve Cities Near Orlando
Along with our Door Installation work across Orlando, our team regularly serves homeowners in Door Installation in Orlando and the surrounding communities, including Winter Park, Maitland, Goldenrod, and Altamonte Springs. If you’re just outside the city limits, call and we’ll confirm coverage for your street.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Orlando
Yes. Any replacement door in Orlando requires a permit, and a sliding glass door in a vacation rental is no exception. The permit triggers an inspection that verifies the door meets Florida Building Code wind-load ratings. If you skip it and the door fails later, your insurance claim can be denied because the work wasn’t documented. We pull the permit on every job and we don’t leave until the inspection passes. Call (813) 320-9346 and we’ll walk you through what the permit process looks like for your property.
Most entry doors in Orlando need to carry a design pressure rating that matches the wind zone for the opening’s location and size. That’s typically a DP 40 to DP 50 rating depending on the specific site conditions, the door’s dimensions, and the exposure category from the Florida Building Code. A compliant quote includes the exact rating statement on paper, not a verbal “this should be fine.” We provide that documentation before the door gets installed.
It can, but only if the work is documented and the door carries the rating your insurer looks for. Insurers in Florida offer mitigation discounts for openings that meet current wind codes, especially when the permitting record and product documentation are clean. We register the warranties and keep the permit file complete so you have what your insurance agent needs to evaluate a premium adjustment. Ask your agent what documentation they require, then call us at (813) 320-9346 to get the installation record done right.
If the glass looks foggy, hazy, or has moisture trapped between the panes from the inside and outside, the seal has failed. That’s an insulated glass unit failure, and Orlando’s 74% average humidity makes them fail faster here than in drier markets. The frame may still be reusable if it’s not swollen, the track isn’t stripped, and the jamb anchors are still solid. We’ll assess the frame before quoting a glass-only replacement versus a full unit swap, and we’ll tell you straight if the frame is worth keeping. Call (813) 320-9346 for a free assessment.
Constant tenant turnover means doors get handled harder and maintained less. Management companies defer maintenance until a door stops latching or a track strips out, and by then the frame has often swollen past the point of repair. The short-term rental business model doesn’t reward maintenance, it rewards filling the next booking. We replace more doors in ChampionsGate, Reunion, and Windsor Hills in one season than most Orlando neighborhoods see in five years, and we’ve learned to schedule around guest arrival calendars so a door gets swapped between check-outs. Call (813) 320-9346 if your property needs a door that works before the next guest walks in.
For Door Installation in Orlando that’s done right, anchored correctly into CBS block, and documented for permit and insurance compliance, call TruePane Windows & Doors at (813) 320-9346. We’ll come out, measure twice, and give you a written, itemized estimate. Free, no pressure, and a person answers when you call.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Orlando and Central Florida with window and door craftsmanship built on years of community service.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.