Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Palm Springs
Door installation in Palm Springs, FL rarely starts with a door. It starts with a home inspection report, an insurance underwriter’s letter, or a jalousie window that a buyer’s lender refuses to finance. We know this because our crews work this village every week. When you call TruePane Windows & Doors at (813) 320-9346, a live person answers, and they’ll know what a CBS opening on Congress Avenue means before you finish describing it. We schedule from our South FL office and dispatch technicians who understand Palm Beach County’s wind-borne debris requirements and the older concrete block homes that dominate this community.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Door Installation Company
Palm Springs homeowners don’t hire a door company on a whim. They typically call us after a real estate transaction stalls, an insurance policy comes up for nonrenewal, or a door that’s been binding since the 1990s finally becomes impossible to live with. Our reputation in this village is built on showing up when we say, measuring every opening twice, and writing down both warranty layers before the truck leaves the driveway. Dale Kessler founded TruePane in 2008 on a simple rule that still governs every install: if the pane is not true, the job is not done. That’s meant something specific to Palm Springs customers over the years. We’ve replaced jalousie doors on 1958 CBS ranchers, set impact-rated fiberglass entry systems into original masonry pockets, and fixed anchoring failures from installers who treated a concrete block home like a wood frame one. Our technicians are background-checked and uniformed. The workmanship carries a 90-Day Done Right Promise. And a live person answers the phone 24 hours a day, 7 days a week. No voicemail tree, no callback form.
Our Door Installation Services in Palm Springs
Every door we install in Palm Springs gets anchored to block, not assumed into it. That’s the short version. The longer version depends on which door you’re replacing and what the existing opening looks like. Here’s what we handle most often in this village.
Entry & Swing Doors
Entry door replacement in Palm Springs usually means removing a corroded aluminum jalousie unit or a hollow-core original from the 1960s and squaring a new prehung door inside a concrete block opening that hasn’t been touched in sixty years. We anchor the frame with masonry fasteners rated for CBS, shim the jamb true, and flash the rough sill so water doesn’t wick behind the casing. Most jobs are completed in a single visit. Our Door Installation team handles fiberglass, steel, and wood entry systems, and we’ll quote manufacturer lines side by side on paper so you see exactly what you’re buying.
Double & French Doors
Widening a CBS opening for a double door in Palm Springs means cutting block, adding a properly sized lintel, and tying the new rough opening into the existing masonry wall. That’s structural work, not a trim swap, and it needs a permit and a wind-load calculation. We handle both. French doors on older Palm Springs homes often go into former porch enclosures or carport conversions, which means the existing header isn’t always adequate for the span. We check before we quote, and we put the price in writing before we order anything.
Bifold & Folding Doors
Bifold door systems in Palm Springs show up most often on 1950s and 1960s ranch homes where a back wall opens to a screened patio or pool deck. The challenge here is the header: folding door systems concentrate weight at the top track, and many original CBS lintels weren’t engineered for that load. We reinforce the opening as needed, set the track dead level, and adjust the panels to the point where they fold without dragging. Given Palm Beach County’s wind-borne debris region status, we also verify the product carries current Florida Product Approval certification.
Pivot Doors
Pivot doors are the long-lead item in Palm Springs, and anyone telling you different hasn’t ordered one. A custom pivot door, especially something from a higher-end line or a fully custom millwork spec, routinely runs 10 to 14 weeks from approved drawings to delivery. If your frame is masonry, the pivot hardware has to be set into the block with precision anchoring: a quarter-inch out of plumb translates to a door that swings open on its own or binds at the strike. We tell customers the honest sequence: design approval first, fabrication second, and the install date locks in only after the door is physically at our warehouse. Lead times drive the calendar on this tier, not labor. The price is fixed in writing before the order goes in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Palm Springs homes we lean heavily on brands that hold current Florida Product Approval certifications. PGT and CGI impact-rated products show up frequently in this village because they meet Palm Beach County’s wind-borne debris code requirements without requiring Miami-Dade NOA testing, which drives cost into doors unnecessarily. We also work with Simonton for entry systems where impact rating isn’t required but thermal performance and build quality still matter. We stock common hardware and weatherstripping for these lines and can turn most parts requests around faster than a regional supply house. You’ll see every brand price side by side on paper, with warranty durations stated, before you sign anything.
Common Door Installation Problems We See in Palm Springs Homes
- Sagging doors from wood-frame lag screws in CBS openings. Installers who learned on wood frame homes sometimes anchor prehung doors into concrete block with the wrong fasteners. The door holds for six months, then sags, then binds at the top strike corner. We repair these by re-anchoring with masonry-specific fasteners and re-shimming the jamb true.
- Water damage from skipped flashing at the concrete block sill. Palm Springs’s afternoon thunderstorms test every exterior opening. When flashing tape isn’t run over the rough sill and up the jambs, water wicks behind the frame, rots the interior casing, and eventually kills the seal on any adjacent sidelight. We flash every sill we set, no exceptions.
- Jalousie doors replaced without wind-load anchors. A new impact-rated door installed into an old wood buck frame might look fine, but it won’t pass Palm Beach County’s wind-borne debris inspection. We see this pop up on homes that were “upgraded” right before a sale and then flagged by the buyer’s inspector. The fix is pulling the door, anchoring properly to block, and re-flashing.
- Misaligned pivot hardware on masonry openings. Pivot doors set into block without precise anchoring drift out of plumb within a season. The door starts swinging on its own or won’t close without force. We reset the hardware with the correct masonry anchors and torque spec, then adjust the swing clearance.
Pricing for Door Installation in Palm Springs, FL
A prehung entry door replacement on a standard CBS rancher in Palm Springs typically runs $1,800 to $3,400, depending on the material and whether impact rating is required. Impact-rated storm doors and entry systems land between $2,800 and $5,500 installed. French or double door retrofits where we’re widening a block opening start around $4,500 and go up with the lintel work and header reinforcement. Custom pivot doors are their own category: $6,000 to $14,000 or more, with the manufacturer’s lead time setting the timeline more than our crew schedule. Custom arched doors in masonry openings run $3,500 to $7,000 because the jamb fabrication is one-off work, not a stock prehung unit. Every quote is fixed on paper before ordering, with both warranty layers registered in writing. Estimates are free. Call (813) 320-9346 for an exact number on your door.
We Also Serve Cities Near Palm Springs
Our crews work throughout the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you own a home in one of these areas and need door replacement or repair, Palm Springs is central to our route planning, and we can usually combine a nearby quote with an existing scheduled visit. Call us to check the calendar.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Springs
Yes. Replacing an exterior door in Palm Springs, especially when you’re swapping a jalousie unit for an impact-rated door, requires a permit and a wind-load inspection under Palm Beach County’s current code. We pull the permit, schedule the inspection, and make sure the anchoring and flashing pass the first time. Call (813) 320-9346 and we’ll walk you through the sequence before you commit.
Sometimes. If the existing opening is a standard 36-inch rough opening and you want a 60-inch double door, we have to cut block and install a new lintel. That’s structural work and it’s done under permit. For smaller widenings, we may be able to work within the existing masonry pocket if the block is sound. We’ll tell you which applies to your home after the first measurement, and the estimate is free.
It starts with an inspector or underwriter flagging the jalousie exterior openings. Then either the seller or buyer calls us, we measure the openings, generate a fixed written quote for impact-rated replacements, and coordinate the install around the closing date. We recently replaced a corroded aluminum jalousie entry door on a 1958 CBS rancher off Congress Avenue after the buyer’s insurer refused to bind coverage. Our crew set a ViewLux impact-rated fiberglass door into the concrete block opening, milled custom shims to square the jamb in the original masonry pocket, and flashed the rough sill before anchoring. The sale closed two days ahead of the underwriting deadline. Call us early in the process and we’ll tell you what’s realistic.
Yes, in most cases. Palm Springs sits inside Palm Beach County’s wind-borne debris region even though it’s outside the stricter HVHZ that covers Miami-Dade and Broward. That means products need Florida Product Approval certification, and impact-rated doors often satisfy insurance wind-mitigation credits that lower your premium. The payback is usually measured in years, not decades. Call (813) 320-9346 and we’ll quote both impact and non-impact options so you see the actual price difference in writing.
Plan on 10 to 14 weeks for a custom pivot door, measured from the day drawings are approved. The fabrication drives that timeline, not our crew schedule. We’ll give you a fixed price at the order date and lock the install date only after the door arrives at our warehouse. If you need a door before a closing, tell us on the first call and we’ll tell you straight whether a custom unit can make the deadline or whether a stock impact-rated door is the better play.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.