Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Pittman
Door installation in Pittman runs anywhere from $900 for a basic slab swap to $6,500 or more for a full frame-and-opening rebuild with impact-rated glazing, depending on what’s behind the old unit. Most Pittman homes were built before Florida’s post-2004 code overhaul, which means the rough opening usually needs more than a new door hung in the old jamb. We’ve been pulling doors in the St. Johns River corridor long enough to know what’s behind them. Call (813) 320-9346 for a free estimate, and we’ll tell you what you’re actually looking at before anyone touches a screwdriver.
Why TruePane Windows & Doors Is Pittman’s Preferred Door Installation Company
TruePane has spent years in Florida’s glass and door trade, and the Pittman jobs we take on have a particular character: older wood-frame homes, high humidity, and openings that were patched rather than replaced for decades. Dale Kessler founded the company on the rule that if the pane is not true, the job is not done. That standard carries to every hinge, threshold, and rough opening we rebuild in Pittman.
We’re not a franchise outfit working out of a regional call center. A live person answers the phone 24 hours a day, 7 days a week. When you call about a binding door or a threshold that’s gone soft, you talk to someone who can actually schedule a crew. Our technicians are background-checked, uniformed, and trained to work in a customer’s home the way they’d work in their own mother’s. Dispatch and scheduling are coordinated from our South Florida office, but the crews who show up in Pittman are the same crews who’ll come back if anything needs attention under the 90-Day Done Right Promise.
We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard. No paperwork fights later.
Our Door Installation Services in Pittman
Entry & Swing Doors
Entry doors in Pittman take a beating from the humidity. A steel or fiberglass slab with a proper thermal break and a fusion-welded frame will outlast the original wood units on most of these 1960s and 1970s homes. We rebuild the rough opening, set the frame square, and flash it so wind-driven rain from a summer thunderstorm stays outside where it belongs. If you want a Door Installation done once and never thought about again, this is where it starts.
Storm Doors
A storm door over an aging entry door is a smart move in Pittman, where driving rain hits the east-facing openings hard from June through September. But the existing jamb has to be sound first. We’ll tell you if the rough opening can handle a storm door without triggering a full replacement. If it can, we’ll set it, flash it, and make sure the sweep actually seals against the threshold. No gaps, no rattling in the wind.
Arched & Custom Doors
Some Pittman homes have arched or non-standard openings that big-box stores won’t touch. We measure the actual radius, not the nearest guess, and order the door to match. Custom sizes take longer, but they fit. That’s the whole point. We’ve done arched entries on older ranch homes in the corridor where the original jamb curves were never quite square. The fix is in the framing first, then the door.
Bifold & Folding Doors
Bifold and folding door systems need a level floor and a true opening to operate without binding. In Pittman, where slab settlement and humidity both work against you, that means checking the header and the track alignment before the panels go in. We shim, level, and adjust until the door opens with one hand. If the opening is out of true, we fix the opening first.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pittman
We’re an authorized installer for more than a dozen manufacturer lines, and for Pittman homeowners we regularly quote Andersen, ES Windows, and ECO Window Systems side by side on paper so you see exactly what you’re buying. We don’t push one brand over another. We push the one that fits your opening, your wind-load requirement, and your budget. We’ve seen too many doors ordered wrong from a catalog. We order from the actual measurements, confirmed twice, so the door that shows up is the door that fits. Our Pittman customers get the same access to genuine parts and warranty registration as anyone else we serve.
Common Door Installation Problems We See in Pittman Homes
- Rot at the threshold and subfloor. Year-round humidity above 80% pushes moisture into the threshold, and once water gets under the sill, the subfloor starts to go. Door removal often reveals rot that nobody knew was there because the old threshold was hiding it.
- Failed flashing tape on pre-2004 openings. Wind-driven rain during summer thunderstorms slips past old flashing and into the wall cavity. Hidden mold, soft framing, and rusted fasteners are the usual result. We strip the old opening and reflash it properly before the new door goes in.
- Caulked-over seal failures on single-pane aluminum doors. Old aluminum doors with no thermal break lose their seals and sweat. Homeowners caulk the gaps, but the unit is dead. We replace it with something that actually has a thermal break and a real weather seal.
- Out-of-square rough openings. Decades of settling and humidity leave jambs out of plumb and openings out of square. A new door hung in a bad opening will bind in July and leak in August. We rebuild the opening square before we hang anything.
Pricing for Door Installation in Pittman, FL
Here’s what Pittman homeowners can expect to pay.
- Basic slab replacement (no structural work): $900-$1,600
- Entry door with fusion-welded frame and impact-rated glazing: $2,200-$4,800
- Storm door over a sound existing jamb: $600-$1,400
- Full frame-and-opening rebuild with flashing and rot repair: $3,500-$6,500+
- Arched or fully custom door, set and flashed: $3,000-$7,000 depending on radius and material
The wild card in Pittman is always the rough opening. Older homes aren’t uniform, and when we pull the old door, we sometimes find framing that can’t stay. That’s not a surprise we spring on you. We write allowances into the contract, and any change order is priced and approved in writing before we touch it. Call (813) 320-9346 to schedule a free estimate, and we’ll quote the actual door, the actual opening, and the actual work.
We Also Serve Cities Near Pittman
Our crews work throughout the corridor, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in a neighboring community and dealing with the same humidity, the same older openings, and the same wind-load requirements, call (813) 320-9346 for a free estimate.
Serving Pittman, FL - Our Local Coverage Area
We’re based in the Pittman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pittman
Yes, in most cases. Pittman sits in the St. Johns River corridor, and Florida Building Code design wind speeds apply even to inland rural homes. When you pull a permit for a door replacement on a pre-2004 home, the new unit typically must meet current wind-load and impact requirements, which often means full frame-and-opening replacement rather than a slab swap. We’ll confirm what your specific opening requires before we quote the job. Call (813) 320-9346 and we’ll walk you through it.
Relative humidity in the St. Johns River corridor stays above 80% for much of the year, and summer thunderstorms drive rain horizontally. The combination means water sits against thresholds longer and penetrates old flashing faster. Once moisture gets under the sill, rot sets in and spreads into the jamb and subfloor. Proper flashing, a sloped sill, and a real weep system are the fix. We install all three.
A permitted door replacement on an older Pittman home can trigger upgrades to the rough opening itself: wind-load-rated framing anchors, proper flashing and moisture barrier, impact-rated glazing where required, and sometimes correction of wiring that’s exposed once walls are open. We inspect first, write the likely allowances into the contract, and get any additional scope approved in writing before we proceed. Call (813) 320-9346 with your address and we’ll explain what applies to your opening.
We stop, photograph the damage, and write a change order with a specific price and scope. We don’t proceed until you’ve approved it in writing. On one 1970s wood-frame home off Pittman Road, our crew pulled a rotted entry door and found the rough opening had been packed with foam and caulk for decades. The jamb was soft, and the original aluminum threshold had failed. We rebuilt the rough opening, installed a fusion-welded frame with impact-rated glazing and flashing tape, and wrote the framing repairs into a change order approved before we set the new door. That’s the only way we work.
Often yes, but it depends on the condition of the existing jamb and rough opening. A storm door is an accessory, and in many cases it can be installed without a full replacement permit, provided the existing opening is sound and the mounting surfaces are stable. We’ll inspect the jamb, the threshold, and the surrounding framing first. If the opening can’t support the storm door, we’ll tell you before any work starts. Call (813) 320-9346 to schedule an inspection.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pittman and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.