Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Port St. Lucie
Door installation in Port St. Lucie almost always comes down to one thing the national chains never tell you: on the GDC-era CBS homes that make up most of this city, the rough openings rarely match off-the-shelf impact door units. We know that before we pull the permit, because we’ve re-framed hundreds of these slabs between Floresta Drive and the St. Lucie River corridor. If you’re in Port St. Lucie and need an entry door, French door, storm door, or custom pivot door done right the first time, call Dale Kessler’s team at TruePane Windows & Doors at (813) 320-9346. We quote it in writing, we hold the price, and we build it to pass inspection on the first try.
Why TruePane Windows & Doors Is Port St. Lucie’s Preferred Door Installation Company
TruePane has spent years in Florida’s window and door trade, and the work we do in Port St. Lucie is grounded in a plain fact about this city: it was mass-built by General Development Corporation starting in the late 1960s, and those homes were framed to accept doors that are no longer code-compliant or even manufactured. Most companies that serve Port St. Lucie drive up from South Florida without that history in their heads. We carry it into every estimate.
Our Door Installation team includes journeymen who have pulled permits along Port St. Lucie Boulevard and through the numbered streets off Floresta. They measure every opening twice before anything is ordered, because the biggest cost driver on a high-end Port St. Lucie door job is not labor. It is the millwork lead time and the re-framing that the original GDC rough opening demands. We quote with those costs in the line items from day one, not as a change order after demo.
Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. For homeowners in Port St. Lucie who remember boarding up for Frances and Jeanne in September 2004, that standard matters. It means we don’t leave a jamb gap that fails wind-load inspection and voids the product approval. We stand behind it, in writing, through the 90-Day Done Right Promise and The Keystone Standard.
When you call us, a live person answers. That’s true at 2 p.m. on a Tuesday and at 2 a.m. before a storm watch. No voicemail tree, no regional call center. You talk to someone who can schedule a real appointment for your Port St. Lucie home, not log a ticket.
Our Door Installation Services in Port St. Lucie
Entry & Swing Doors
A front door on a Port St. Lucie CBS-block home does two jobs: it carries the curb appeal of the whole façade and it has to meet Florida’s wind-borne debris code. We install fiberglass, steel, and wood entry doors with impact-rated glass where the opening demands it. On the older GDC ranchers along Port St. Lucie Boulevard, we typically re-frame the rough opening with pressure-treated bucking before the new jamb goes in, because the original 1970s frame was not built for a modern impact-rated unit. That step is the difference between a door that seals in July humidity and one that binds by August.
Double & French Doors
Double French doors change how a Port St. Lucie home moves between indoors and lanai. We install inswing and outswing units, and for the older homes off Floresta Drive, we recommend outswing impact-rated French doors that are easier to seal against wind-driven rain crossing from the Atlantic. The key here is the sill pan and flashing detail. A properly flashed French door on a 1970s stucco home sheds water cleanly. A poorly flashed one rots the subfloor within five years. We flash every opening with Vycor and we don’t skip the pan.
Bifold & Folding Doors
Folding door systems are popular on newer Port St. Lucie builds where homeowners want a wide opening between the great room and the pool deck. They are also the most demanding install we do, because the weight of a four-panel system hangs off a header that must be dead level. On concrete block walls, that means drilling and anchoring into solid grout cells, not just the face shell. We specify the track system to the manufacturer’s requirements and we block the lintel before the first panel is hung.
Pivot Doors
Custom pivot doors in Port St. Lucie are a commitment. An 8-foot fiberglass pivot slab can weigh over 300 pounds, and the hinge-blocking has to be confirmed in the CBS lintel before we order anything. We’ve pulled permits on custom pivot installs where out-of-area subs hung the hardware without blocking and the door sagged before the first named storm. Dale Kessler’s team measures the opening, verifies the structural condition of the lintel, and locks the price in writing before the millwork order goes out. The door itself is often a nine-to-twelve-week lead item. We’d rather tell you that up front than apologize for it later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port St. Lucie
TruePane is an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, ES Windows, ECO Window Systems. For Port St. Lucie homeowners, that means we can put two or three quotes side by side on paper and show you exactly what each door costs, what the warranty covers, and how long the lead time runs. We service major brands rather than pushing one catalog. If you have an existing Andersen French door that needs new seals or adjustment, we handle that. If you want a new PGT impact-rated entry door, we quote it with the re-framing line item already in the estimate. You see the whole picture before you sign.
Common Door Installation Problems We See in Port St. Lucie Homes
- Factory impact doors installed into original GDC rough openings without re-framing. The original 1970s openings on many Port St. Lucie slabs are a half-inch smaller than current impact-unit specs. A sub that tries to force the new door in leaves a jamb gap that fails wind-load inspection and voids the product approval. We re-frame to correct dimensions and pull permits before the new unit goes in.
- Builders’ grade aluminum storm doors corroding at the hinges within two years. Salt-laden onshore air along the St. Lucie River corridor eats cheap aluminum hardware fast. We specify stainless steel hinges and powder-coated frames on storm doors for homes near the river and the coast, and we tell you honestly which doors will not hold up on your street.
- Custom pivot doors ordered without confirmed hinge-blocking in the CBS lintel. An 8-foot pivot slab is a structural load, not an accessory. Without solid blocking in the lintel, the hardware pulls away and the door sags. We verify the block positions on the rough opening before we write the order, and we note them on the shop drawings.
- Single-pane sliding glass doors still doing the work of a modern hinged or folding door. Port St. Lucie has thousands of these from the GDC era. They leak conditioned air, they fog, they seize in the track. Replacing a slider with a French door or a folding door changes the room and the cooling bill. We quote both options on paper so you can compare.
Pricing for Door Installation in Port St. Lucie, FL
A standard entry door replacement in Port St. Lucie runs between $1,400 and $2,800 for a quality steel or fiberglass unit, including removal and basic re-framing. French door replacement typically runs $2,500 to $5,500 per opening, depending on whether the unit is impact-rated and whether the sill and flashing need full rework. Storm door installation runs $600 to $1,400 with stainless hardware and proper flashing. Custom pivot doors start around $6,000 and go up from there, because the millwork lead time, structural blocking, and finish work are all custom.
What moves the price on a Port St. Lucie job is the rough opening. On GDC-era CBS homes, the re-framing and flashing line item is real labor and real material. We put it in the estimate on the first visit, not as a surprise after demo. Call (813) 320-9346 and we’ll give you a written, line-item quote. Estimates are free and the price is fixed in writing before anything gets ordered.
We Also Serve Cities Near Port St. Lucie
Our Port St. Lucie crews regularly work in surrounding communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those areas and need a door installed, replaced, or serviced, call us at (813) 320-9346. We schedule real appointments with a real person, and we bring the same Port St. Lucie experience to every job along the Treasure Coast. Learn more about what we do across the region at our Door Installation in Port St. Lucie page.
Serving Port St. Lucie, FL - Our Local Coverage Area
We’re based in the Port St. Lucie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Port St. Lucie
GDC-built homes in Port St. Lucie used a standard rough opening size that no longer matches off-the-shelf impact door units. The opening is often a half-inch smaller than what modern Florida Building Code impact-rated doors require. That means the existing jamb has to be re-framed with pressure-treated bucking and flashed before the new unit goes in. We build that cost into the original estimate. If a contractor tells you they can just install the new door into the old opening, the inspection will likely fail and the product approval gets voided. Call (813) 320-9346 for a quote that includes the re-framing from day one.
Plan on eight to twelve weeks from the signed order to installation. That’s the reality of custom millwork, and it’s the reason we write the full price into the contract before the order goes out. On a recent CBS ranch near Floresta Drive, the pivot door alone was a nine-week lead item. We pulled permits early, re-framed the opening while the slab was being milled, and then hung and trimmed the door in a single day once it arrived. If you need a pivot door before storm season peaks, call us in the spring. The calendar is set by the millwork, not by labor.
Yes. Under the Florida Building Code, all of Port St. Lucie sits within the wind-borne debris region. That means any permitted door replacement has to use an impact-rated product or a product with proper shutter protection. Homeowners who lived through Frances and Jeanne in September 2004 don’t usually argue this point. The insurance discount is real, but the more immediate reason is that the building department won’t pass a non-compliant install. We pull permits on every door replacement and every inspection gets passed before we call the job done.
We can. The stucco reveals on 1970s Port St. Lucie homes have a distinctive depth, and an off-the-shelf door with a shallow casing will always look wrong next to them. We build out the jamb extensions and trim to match the existing reveal depth, and we spec the door to the same plane as the original. That’s a detail out-of-area installers routinely miss. On a full entry replacement, we’ll bring finish samples to the house before the order is placed so you can see the door, the casing, and the reveal together. Call (813) 320-9346 and ask for a millwork consultation.
It will, and the difference is measurable on a Port St. Lucie summer. Original hollow-core doors from the GDC era leak conditioned air around the perimeter and transfer heat straight through the slab. A properly installed ENERGY STAR certified fiberglass or steel door with compression weatherstripping and an insulated core stops most of that loss. We also seal and flash around the rough opening so the jamb itself doesn’t become a thermal leak. You won’t replace your HVAC with a door, but you’ll notice the front room stops baking by 3 p.m. For a quote on your specific opening, call (813) 320-9346. Estimates are free and the price is locked in writing before we order anything.
Ready to get your Port St. Lucie door done right? Call TruePane Windows & Doors at (813) 320-9346. Dale Kessler’s team will measure the opening, quote the job line by line, and register both warranty layers in writing before the truck leaves the driveway. No arguing, no surprise line items, no door that binds in July. That’s the standard we’ve kept since 2008, and it’s the standard we’ll keep on your street in Port St. Lucie.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port St. Lucie and the Treasure Coast with door and window installation since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.