Door Installation in San Antonio - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across San Antonio

Door installation in San Antonio generally runs $850 to $4,200 for a standard single entry door, $2,800 to $7,500 for double or French doors, and $5,000 to $12,000 plus for custom arched or pivot work, depending on whether the rough opening is sound or needs rebuilding. That second number matters more in San Antonio than almost anywhere else in Pasco County, because the old-town core has some of the oldest wood-frame structures in the region, and we regularly find rot behind trim that was never visible at the quote stage. If you’re calling from a 1910 cottage near the historic colony center or a five-acre ranch lot off Bellamy Brothers Boulevard, you’ll get a straight answer from us about what the job is likely to cost before we pull the first piece of trim. Call (813) 320-9346 and we’ll schedule a time to measure your openings and walk you through the numbers on paper.

Call (813) 320-9346

Why TruePane Windows & Doors Is San Antonio’s Preferred Door Installation Company

We’re not a franchise crew that shows up with a van wrapped in stock photography. TruePane Windows & Doors works in San Antonio the way a local trades company should: background-checked, uniformed technicians who measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. Dale Kessler founded this company in 2008 on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That applies to doors as much as windows. A door that binds in July or lets water migrate under the threshold in August is a door that was never installed straight to begin with.

Our Door Installation team has worked on homes across the San Antonio area, from the historic grid streets near the old St. Anthony of Padua Catholic Church to the newer ranch tracts pushing east toward the I-75 corridor. The feedback we hear from San Antonio homeowners matches what we see on the job: the house is old, the lumber is soft in places, and the previous contractor didn’t pull enough trim to know what he was quoting. We do it differently. Every estimate is a fixed-price, written line-item quote. If we open the wall and find termite damage or a settled header, we stop, show you the problem, and give you a revised scope before any additional work starts. No surprise line items on the bill. No second appointment left hanging. If it’s not done right, our 90-Day Done Right Promise makes it right with no paperwork fights.

Our Door Installation Services in San Antonio

Entry & Swing Doors

A solid entry door on a San Antonio home has to do more than close. It has to resist the seasonal swell that comes with Pasco County humidity, shed the afternoon downpour that rolls through from May to September, and stay square when the underlying frame has moved a little over eighty or a hundred years. We install factory-finished fiberglass, wood, and steel entry systems, and we pay particular attention to the sill pan, the flashing at the threshold, and the weatherstripping reveals. In the old-town core especially, the original door opening is rarely plumb or square, and that has to be corrected before a new door goes in, or you’ll be fighting the latch every June.

Double & French Doors

Double and French doors are common on San Antonio ranch homes and the newer acreage builds, where the back of the house opens onto a patio or a pasture view. These doors are wider than single units, which means the header is carrying more load, and the sill is a bigger target for water migration. We check the rough opening for rot and settlement before quoting, and we specify argon-filled low-E insulated glass units as a default on these wider openings because West Pasco sun exposure will cook a room through untreated glass. We scoped a double French door replacement for a 1910 cottage near the old San Antonio town center and found the original pine jamb and threshold hollowed by Formosan termites. Moisture had wicked into the rough opening, and the header had settled three-eighths of an inch. Our crew rebuilt the king studs and sill with pressure-treated lumber, flashed the opening with Vycor tape, and installed an Andersen 400 Series hinged French door with argon-filled low-E insulated glass. It turned a half-day quote into a three-day full-frame job, but the homeowner finally has a door that latches square and seals dry. That is how the work has to be done here.

Bifold & Folding Doors

Bifold and folding door systems are practical on San Antonio homes where the lot is open enough to justify a wide pass-through to a porch or pool deck. The critical variable on these installations is the lintel and the flatness of the rough opening across a span that can run eight, ten, or twelve feet. On newer tract homes the opening is usually close to true; on older or lower-cost builds, it rarely is. We shim, plane, and reinforce as needed so the panels track cleanly and seal at the jamb. The same 90-Day Done Right Promise covers folding doors, which is worth knowing before you pay a contractor who will never answer the phone after final payment.

Pivot Doors

Pivot doors are heavy, and the hardware and framing have to be right the first time or the door will sag and scrape the floor within a year. On San Antonio’s acreage builds, where a pivot door is often a statement piece at a grand entry, we coordinate the rough opening dimensions with the builder or frame it ourselves to the manufacturer’s spec. The hinge-side framing takes real load. We do not rely on 2×4 stock where the manufacturer’s installation guide calls for engineered lumber or steel reinforcement. A pivot door is not the place to save a few dollars on framing, and we will tell you that plainly before you sign anything.

Storm Doors

A storm door on a San Antonio home is a practical upgrade: it lets the morning breeze through while keeping insects out and mitigating the heat gain on the main entry door. The installation is straightforward compared to a full replacement, but the rough opening still needs to be sound. We install storm doors only when the underlying jamb and threshold are in good shape, because a storm door mounted to a rotting frame is a future callback no one wants.

Arched & Custom Doors

Arched and custom doors matter in San Antonio because the historic colony homes often have non-standard, sometimes hand-framed openings that no off-the-shelf door will fit. An arched entry or an unusual jamb depth means a custom order, which takes longer and costs more, but the result is a door that actually belongs on the house. We measure and route these openings ourselves, specify the radius precisely, and handle the install so the reveal is even and the weatherseal contacts everywhere. This is not a rush job. It is a fit-and-finish job, and we approach it accordingly.

Trusted Brands We Service in San Antonio

We are an authorized installer for more than a dozen manufacturer lines, and on San Antonio jobs we regularly quote PGT, CGI, and Ply Gem side by side so you can see the difference in glass packages, wind-load ratings, and warranty duration on paper. PGT and CGI make sense here because Pasco County sits inland enough to be out of the highest Miami-Dade wind zone, but new construction and replacements still have to meet Florida Building Code product-approval requirements tied to Pasco County’s design wind speed maps. Not every door sold in a big-box store carries the right product approval for this county. We only install units that do. Both manufacturer warranty layers get registered in writing before our truck leaves the driveway, and we state the durations on the quote so you know exactly what you’re covered for and for how long.

Common Door Installation Problems We See in San Antonio Homes

• Rough-opening rot behind the jamb on historic wood-frame doors. San Antonio’s oldest homes were framed with old-growth pine that has had a hundred and twenty years of wet-dry cycles. When we pull the trim on a pre-1940 door opening, we frequently find rot and termite galleries that were never visible from the outside. A builder who quoted a simple insert replacement has to change scope to a full-frame tear-out and rough-opening rebuild. We price for that possibility up front and explain it clearly so the quote you sign is the job you get, not the job a hungover estimator guessed at.
• Improper flashing at the sill and threshold on slab and stone foundations. On San Antonio ranch homes built on slab or limestone, water from a hard summer storm can travel along the surface and pool at the threshold if the sill pan is missing or mis-flashed. We inspect the sill before quoting and install a proper pan with back dam and end dams where there was none. It is a simple thing, but it is the single most common failure we fix on doors installed by other companies in this area.
• Wrong wind-load product approval for Pasco County design wind speeds. We have seen San Antonio homeowners buy impact doors from a coastal distributor that were tested for Miami-Dade conditions but not verified against Pasco County’s wind speed maps. A door that carries the wrong product approval can fail an inspection and void the insurance claim if it is ever damaged. We check the Florida Building Code product approval before we order anything.
• Settled headers and out-of-square openings in century-old homes. The old-town colony houses were built before modern framing conventions, and a header that has settled three-eighths of an inch over a century means the new door will never hang right until the opening is corrected. We measure with a four-foot level and a laser before quoting, and we tell you up front if the rough opening needs to be snapped back to square. That conversation usually saves the homeowner a fight about why “the new door is crooked” six months after installation.

Pricing for Door Installation in San Antonio, FL

We Also Serve Cities Near San Antonio

Our Door Installation in San Antonio crews regularly take jobs in Wesley Chapel, Dade City, Trilby, and Lacoochee. The drive time is short enough that we schedule San Antonio appointments without a travel surcharge, and the same fixed-price written quote applies whether the job is a 1910 cottage in the old-town grid or a ten-acre ranch south of Dade City. Call us and we’ll get you on the schedule.

Key Takeaways

• San Antonio door installation runs $850 to $12,000 depending on door type and rough-opening condition, with full-frame historic rebuilds at the higher end.
• The old-town colony homes frequently hide rot and termite damage behind the jamb that only becomes visible after trim removal, which is why we price for full-frame scope up front.
• Pasco County permits, septic and well setbacks, and wind-load product approvals directly affect cost and where and how a door can be installed on San Antonio acreage.
• TruePane registers both manufacturer warranty layers in writing before the truck leaves the driveway, and covers every job with the 90-Day Done Right Promise.
• Quotes are fixed-price and in writing, with no change orders unless we find hidden damage and you approve the revised scope first.

FAQs - Door Installation in San Antonio