Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Tampa
Door installation in Tampa usually costs between $900 and $4,200 for a standard entry door, with impact-rated systems running $2,800 to $7,500 depending on size and framing condition. Most Tampa homes need openings prepped for wind-borne debris compliance before the new door ever goes in. We serve the entire Tampa area from South Tampa to New Tampa, and a real person answers the phone at (813) 320-9346 when you call. Salt air off the bay changes what you should buy here, and we’ll tell you exactly what holds up.
TruePane has worked Tampa’s concrete block homes and historic bungalows long enough to know which doors fail early and which ones last. Our crews carry the right flashing, stainless hardware, and marine-grade seals for this climate before they pull up to the job. If you’re pricing a replacement on Bayshore Boulevard, Davis Islands, or out in Carrollwood, the material spec matters more than the schedule.
Why TruePane Windows & Doors Is Tampa’s Preferred Door Installation Company
Tampa homeowners call us because we spec doors for the bay, not for a showroom in Ohio. Dale Kessler founded TruePane on a simple rule: if the pane is not true, the job is not done. That rule governs every threshold we set, every jamb we flash, and every warranty we register in writing before the truck leaves your driveway.
We’re licensed and insured, and every technician is background-checked and uniformed. You won’t get a regional call center. You get a live voice, 24 hours a day, seven days a week. Dispatch for Tampa work is coordinated from our South Florida metro office, but the crews that show up know Tampa’s block construction, its historic districts, and its hurricane code requirements.
Our 90-Day Done Right Promise is simple: if the install isn’t right, we make it right. No paperwork fights. No arguing. The Keystone Standard backs that promise with both manufacturer warranty layers registered in writing, durations stated, before we leave the job. That’s the difference between a door company that wants the sale and one that plans to be in Tampa thirty years from now.
Our Door Installation Services in Tampa
We install, replace, and service every common door type found in Tampa homes. Most jobs are completed in a single visit, with upfront pricing on paper before work begins. Here’s what we handle most often in this market.
Entry & Swing Doors
Most Tampa homes built between the 1950s and 1980s still carry their original steel or wood entry doors, and we see the same failure pattern across South Tampa and Temple Terrace: rusted bottom rails, separated thresholds, and hinge screws that have pulled loose from years of humidity cycling. We install fiberglass and steel entry systems with stainless or hot-dip galvanized hinges, composite adjustable thresholds, and full-perimeter flashing at the rough opening. Your door gets measured twice before any order goes in.
Double & French Doors
Double doors on Tampa patios and pool entries face constant water stress from the nearly daily summer thunderstorm cycle. If the astragal is worn or the sill isn’t flashed correctly, water walks right under the door and into the block wall. We set double and French door systems with properly shimmed jambs, sealed astragals, and thresholds rated for driving rain. On west-facing elevations, we recommend marine-grade hardware from the start because the salt air will find cheap steel within a few seasons.
Bifold & Folding Doors
Bifold and folding door systems are popular in newer Tampa builds and post-2000 remodels, especially in Palma Ceia and Beach Park. The failure point here is almost always the track and roller hardware. Salt-laden air corrodes standard rollers quickly, and once a roller seizes, panels bind and the whole assembly works against the jambs. We install folding systems with corrosion-resistant tracks and rollers, and we set the header with exact deflection tolerances so the panels stay square through Tampa’s heat and humidity swings.
Pivot Doors
Pivot doors are heavy, swinging on floor-mounted pivot hinges, and they demand a perfectly plumb rough opening. In Tampa’s concrete block homes, that means the hinge plate must anchor into solid grouted cell or steel reinforcement, never into a hollow block void. We’ve seen pivot doors sag and drag within two years because an installer skipped that step. We don’t skip it. Every pivot door gets a steel-reinforced threshold plate and commercial-grade pivot hardware sized for the door’s actual weight.
Storm Doors
Storm doors on Tampa entryways do double duty: they protect your primary door from UV and they add a layer that can be opened during the cooler months. The biggest mistake we see is a storm door installed over an out-of-square opening, which causes the z-bar to gap and the closer to fail prematurely. We set every storm door to the opening’s real dimensions, with spacing that accounts for Tampa’s seasonal expansion and contraction cycles.
Arched & Custom Doors
Tampa’s older homes, particularly the 1920s bungalows in Seminole Heights and the historic properties in Hyde Park, often have arched or non-standard door openings. Off-the-shelf doors don’t fit them. We build and install custom radius-top and arched doors that match period proportions while meeting current Florida Building Code wind-load requirements. The trick is in the templating and the jamb extension detail. We measure every point of the arch, not just the spring line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tampa
We’re an authorized installer for more than a dozen manufacturer lines, and for Tampa door work we lean on brands with proven coastal performance records. Andersen, Pella, and Marvin all offer impact-rated door systems that hold up in Hillsborough County’s wind-borne debris region, and we stock common parts and hardware locally for faster turnaround. When we quote your door, we put manufacturer lines side by side on paper so you see exactly what you’re buying and why one product costs more than another.
Common Door Installation Problems We See in Tampa Homes
These are the recurring failure modes we find when Tampa homeowners call us in, usually after the first door has already failed.
- Jamb and threshold rot at the frame-to-block transition. Daily summer storms dump water against the door, and when that original sealant was never properly flashed, water gets into the wall cavity. We strip the old sealant, install flexible flashing tape at the jamb-to-block junction, and set a new composite threshold rated for driving rain.
- Aluminum frame oxidation on bayfront elevations. Homes along Bayshore Boulevard and on Davis Islands see chalky white oxidation on aluminum door frames within 8 to 12 years. The corrosion causes sash misalignment and air leaks. We spec marine-grade aluminum or fiberglass replacements in those ZIP codes, with stainless hardware and cap stock over every exposed edge.
- Impact-rated door systems with non-marine-grade hardware. An impact door is only as good as its hinges and screws. We’ve seen brand-new impact doors on Harbour Island where the installer used standard zinc hinges that seized within two years from salt air. That compromises the door’s wind-borne debris protection exactly when you need it. We use stainless or hot-dip galvanized hardware on every coastal install.
- Out-of-square rough openings on older block homes. Concrete block construction from the 60s and 70s shifts over time, and door openings in Carrollwood and North Tampa can be a quarter-inch out of square. Force a pre-hung door into that opening and the seals bind, the locksets misalign, and the door never shuts right. We correct the rough opening first, shim the jambs to true, and only then hang the door.
Pricing for Door Installation in Tampa, FL
You should expect to pay more for a properly specified door in Tampa than in an inland market, and the reason is the wind-borne debris requirement and the salt-air corrosion problem. A standard non-impact entry door here runs $900 to $2,200 installed. An impact-rated entry door runs $2,800 to $5,500. Double doors and French door systems start around $3,200 and go to $7,500 or more for impact-rated Pella or Marvin lines. Custom arched doors, common in Hyde Park and Seminole Heights, run $4,000 to $9,000 depending on species, hardware, and finish level.
Those ranges include tear-out, disposal, framing correction, new flashing, and hardware. If your opening needs masonry repair or a new concrete sill, that’s added. We’ll never surprise you with a line item after the fact. Call (813) 320-9346 and we’ll quote your door in writing, free.
We Also Serve Cities Near Tampa
Our Door Installation crews cover the full Tampa Bay area, including Safety Harbor, Oldsmar, Odessa, and Dunedin. If you’re anywhere in Hillsborough or Pinellas County and shopping for a properly specified, wind-code-compliant door, call us. We schedule work across the region and bring the same coastal-spec standards to every job. See what we do for Door Installation in Tampa and the surrounding communities.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Tampa
Yes, in almost every case. Hillsborough County falls inside Florida’s wind-borne debris region, which means the Florida Building Code requires that door openings either be impact-rated or protected by an approved opening-protection system. This applies to homes miles from the bay, not just waterfront properties. On top of the code mandate, many Florida insurance carriers now require documented impact-rated openings before they’ll write or renew a policy. In practical terms, nearly every door replacement in Tampa is an impact-product sale. If you’re unsure whether your opening needs impact protection, call (813) 320-9346 and we’ll check your property’s wind-load requirements during the estimate.
Standard vinyl door frames fail on Davis Islands and Bayshore Boulevard because of three-sided salt-air exposure off the bay. The salt-laden air attacks the vinyl’s extrusion integrity and breaks down seals far faster than in inland Tampa. We’ve replaced a corroded sliding glass door on Bayshore Boulevard where the original aluminum frame had oxidized to chalky white powder at the jamb and the insulated glass had fogged from a failed seal. Standard vinyl would fail the same way within a decade in that exposure. For those ZIP codes, we spec fiberglass or heavy-wall marine-grade aluminum frames with stainless hardware and flashing tape at the frame-to-block transition. The material spec is the whole job.
Expect to pay 25 to 40 percent more for a coastal-spec door in Tampa than an inland-spec version of the same size and style. That gap covers marine-grade frame material, stainless or hot-dip galvanized hinges and screws, upgraded flashing, and a properly rated threshold. A standard non-impact entry door might cost $900 to $2,200 installed, while a coastal-spec impact-rated version runs $2,800 to $5,500. The cheap inland spec costs more within a decade because you’ll replace it once, maybe twice, in the time a coastal-spec door is still sealing and swinging true. We build the coastal upcharge into every quote from the first conversation so there’s no surprise later.
Yes, but it requires careful material selection and usually a custom door. Hyde Park’s historic wood-frame bungalows from the 1920s and 1930s have non-standard door widths and arched openings that don’t accept off-the-shelf impact doors. The solution is a custom-built door with impact-rated glass and a hidden or period-appropriate frame reinforcement system, paired with marine-grade hardware. Historic district review may also require approval on the visible door face. We’ve worked through that process with Hyde Park homeowners, and we quote the door and the compliance work together in writing. If your bungalow is in a designated historic district, we’ll walk you through what the review board needs.
Twice a year, minimum. Before the summer storm season starts in June and again after hurricane season ends in November. Walk the door during a heavy rain and check for water at the base of the jambs. Run a bead of water across the threshold and look for it seeping under. Pay particular attention to the bottom corners where the jamb meets the concrete block, because that’s where un-flashed sealant fails first. If you find water, don’t wait. Water intrusion rots jambs and corrodes the hardware holding your door in place. Call (813) 320-9346 for an inspection and we’ll tell you exactly what’s failing and what it costs to fix.
Get Your Tampa Door Installation Quote
If you’re in Tampa and pricing a new entry door, storm door, or custom arched door, call (813) 320-9346. We’ll schedule a free estimate, measure your opening twice, and put manufacturer options side by side on paper so you can see exactly what you’re buying. Both warranty layers get registered in writing before the truck leaves your driveway. That’s the TruePane standard.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tampa with coastal-spec door installations since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.