Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Delray Beach
Energy-efficient window replacement in Delray Beach typically runs $850-$1,450 per opening for impact-rated low-E units installed, and most single-family jobs take one to two days on site. TruePane has worked the A1A corridor, Lake Ida, Del Ida Park, and the Old School Square district long enough to know which buildings still carry original 1970s aluminum single-pane glass and which condo boards are already under insurer pressure to replace them. Call (813) 320-9346 and a live person answers, 24/7. We’ll send a background-checked, uniformed tech to measure every opening twice and put a written line-item quote in your hand before any work begins.
Why TruePane Windows & Doors Is Delray Beach’s Preferred Energy-Efficient Windows Company
We’re a second-generation glazier’s company, founded by Dale Kessler in 2008, and we’ve kept the same rule on the whiteboard since day one: if the pane is not true, the job is not done. In Delray Beach, that rule means understanding what four decades of salt air from both the Atlantic and the Intracoastal does to aluminum frames, EPDM seals, and argon fills. Our crews replace windows in the concrete block stucco homes along Atlantic Avenue’s side streets and the high-rise stacks on A1A, and we know the difference between a cosmetic upgrade and a corrosion problem that’s about to fail a wind-load test. Every job carries the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. Senior and veteran homeowners receive a permanent 5% discount.
Key Takeaways:
- Delray Beach coastal exposure demands impact-rated energy glass engineered for 170+ mph design pressures.
- Salt air from two directions corrodes aluminum frames faster than inland Palm Beach County.
- Historic districts like Old School Square require preservation board approval before window replacement.
- Free estimates: call (813) 320-9346 and a live person answers.
Our Energy-Efficient Windows Services in Delray Beach
Low-E & Argon Gas Glass
Low-E coatings and argon gas fills do the heavy lifting in Delray Beach’s heat and humidity. A typical low-E argon-filled replacement window in a Delray Beach single-family home runs $700-$1,100 per unit installed, depending on size and frame material. The old jalousie windows we pull out of Lake Ida and Del Ida Park homes never sealed in the first place. Their louvers leak conditioned air constantly, and we have pulled units where the argon fill was gone entirely and the low-E coating had oxidized from salt exposure.
ENERGY STAR Replacement Windows
For Delray Beach homes east of I-95, we recommend ENERGY STAR-rated impact windows that carry a design pressure rating matched to Palm Beach County’s coastal wind maps. A standard 36-by-60-inch ENERGY STAR impact-rated double-hung runs $950-$1,350 installed in this market. Non-impact windows won’t pass permitting for any home in the coastal wind zone, so quoting them is a waste of your time and ours.
Double & Triple Pane Windows
Double-pane low-E units are the workhorse for most Delray Beach homes, cutting U-factor and solar heat gain coefficient enough to move the needle on FPL bills. Triple-pane adds another layer of thermal and acoustic performance, which matters when you live within earshot of Atlantic Avenue traffic or the freight trains on the FEC tracks. In Delray Beach, a double-pane impact-rated unit carries roughly a $300-$500 premium per opening over a comparable single-pane replacement, and triple-pane adds another $250-$400 per window. We quote both on paper, side by side, so you see exactly what you’re buying.
UV-Blocking & Fade Protection
Delray Beach sun is not gentle. It fades upholstery, hardwood floors, and artwork in homes along the Intracoastal within a few seasons. UV-blocking low-E coatings filter the wavelengths that do the damage without turning your rooms dark. For a typical Delray Beach living room with three windows, UV-blocking glass runs $100-$200 extra per window over standard low-E. Homeowners in the Old School Square Historic District often combine UV-blocking glazing with period-sympathetic frame profiles, which we handle through the preservation board approval process.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Delray Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Delray Beach coastal work we often quote PGT, CGI, and Simonton because all three build windows engineered for the corrosion environment and 170+ mph wind loads this city demands. We don’t push one brand. We price the options side by side on paper, register both warranty layers in writing before leaving the driveway, and stand behind every install in the Energy-Efficient Windows team with the 90-Day Done Right Promise.
Common Energy-Efficient Windows Problems We See in Delray Beach Homes
- Salt air corrosion on A1A condo towers. The original aluminum sliding glass doors on 1970s A1A buildings have oxidized to the point where residents can barely push them open. When a unit goes to sell, inspectors flag them immediately because the frames fail current impact ratings and the glass is single-pane. We’ve replaced these doors building-wide on several towers, coordinating with condo boards and insurers.
- Jalousie windows leaking conditioned air in Lake Ida and Del Ida Park. Jalousie louvers never seal, and on a 1960s CBS home they’re usually framed with corroded aluminum that leaks rainwater into the block. Replacing them for energy efficiency triggers full-frame replacement when we find water intrusion behind the stucco.
- Historic district approval complications in Old School Square. The Delray Beach Historic Preservation Board must approve replacement window profiles and materials. Homeowners sometimes pick non-impact “look-alike” units to satisfy the board, then learn the units fail Florida Building Code wind-load requirements at permitting. We quote impact-rated glazing in period-sympathetic profiles from the start.
- Failed EPDM seals from double-side salt exposure. Delray Beach is unusual: properties get salt air from the ocean to the east and the Intracoastal to the west. Rubber seals harden and crack years before they would in Wellington or Lake Worth. Fogged glass and failed argon fills are the result. We check every seal when we’re on site for any window work.
Pricing for Energy-Efficient Windows in Delray Beach, FL
A full-home energy-efficient window replacement in Delray Beach runs $9,000-$22,000 for a typical 10-to-14-window CBS house, depending on impact rating, frame material, and whether any openings need reframing. Here are line-item ranges our crews quoted in Delray Beach this year:
- Low-E argon double-hung, vinyl, non-impact: $700-$950 per window
- Impact-rated low-E double-hung, vinyl: $950-$1,350 per window
- Impact-rated low-E double-hung, aluminum: $1,100-$1,500 per window
- Sliding glass door, impact-rated low-E: $2,800-$4,200 per door
- Full-frame replacement (when jalousie or corroded frames require it): add $200-$400 per opening
- Window energy audit with U-factor and SHGC measurement: $150-$300
On a 1960s CBS home in Lake Ida, our crew replaced a wall of original jalousie windows with ViewLux impact-rated low-E insulated glass after the homeowner’s insurer flagged the frames for corrosion and the Delray Beach Historic Preservation Board approved the period-sympathetic profiles. The old sashes had lost their argon fill and the EPDM seals had hardened from double-side salt exposure, so we reframed the jambs, flashed the openings with code-specified tape, and set fusion-welded double-hung units that cut the home’s U-factor by nearly half. Within a week, the owner’s energy audit showed a 12% drop in monthly cooling load, and the buyer’s inspector signed off without a single re-flag. Call (813) 320-9346 for a free estimate with exact line-item pricing for your home.
We Also Serve Cities Near Delray Beach
TruePane crews work the full Energy-Efficient Windows in Delray Beach market, including Boynton Beach to the north, Boca Raton to the south, and Deerfield Beach and Greenacres to the west and southwest. If you’re a few blocks past the city line, we’ll still be there when we say. Dispatch and scheduling are coordinated from our South Florida office in Miami, and our crews serve Delray Beach locally.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Delray Beach
Because insurers and Palm Beach County code-compliance drives are pressuring condo boards to bring entire buildings up to current wind-load standards, not just units that are changing hands. The original aluminum single-pane windows and sliding doors on those 1970s towers were installed before Florida’s post-Hurricane Andrew impact codes, and after four decades of salt air from both the Atlantic and the Intracoastal, many frames are corroded past repair. When a building-wide replacement is approved by the board, every unit gets impact-rated glass, regardless of sale status. Call (813) 320-9346 and we’ll walk you through what a building-wide retrofit involves from a contractor’s side.
Salt air attacks EPDM seals from two directions in Delray Beach, since the ocean sits to the east and the Intracoastal runs through the center of the city. Rubber seals hardened and cracked by salt exposure lose their ability to hold argon gas and block moisture, so fogged glass and failed fills show up years earlier than in inland cities like Wellington or Lake Worth. On every Delray Beach job, our techs inspect every existing seal before quoting anything, so you know if a failing window is the one getting replaced or a symptom of a bigger problem.
Yes, but only with the right profiles. The Delray Beach Historic Preservation Board reviews replacement window materials and designs, and they will reject anything that doesn’t match the period character of the building. We quote impact-rated low-E insulated glass in period-sympathetic frame profiles, which satisfies both the board and Florida Building Code wind-load requirements. The mistake we see too often is homeowners getting a quote for non-impact look-alike windows first, then watching the price jump when the permit office requires impact glazing. Call (813) 320-9346 to get the correct quote the first time.
When we pull original jalousie or single-pane aluminum windows from a 1950s concrete block stucco home, we often find water intrusion behind the frames. That means full-frame replacement, not just insert replacement, plus reframing the jambs and flashing the openings with code-specified tape. Add $200-$400 per opening for full-frame work. We write a line-item allowance into every Delray Beach contract so you know what a surprise costs before it happens, and we price any change in writing before we touch it. That’s a square deal.
For Delray Beach coastal work, we usually quote PGT, CGI, and Simonton because all three manufacture windows engineered for 170+ mph design pressures and salt-heavy corrosion environments. PGT and CGI are Florida companies that build impact glazing for this exact coastal condition. Simonton’s vinyl lines hold up well when aluminum frames are not the right choice. We’re an authorized installer for more than a dozen lines, and we’ll quote yours side by side on paper. Call (813) 320-9346 for a free estimate.
Written by Dale Kessler, Owner of TruePane Windows & Doors, serving Delray Beach with energy-efficient window replacement and impact-rated glazing.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.