Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Pine Hills
If you own a 1950s through 1970s concrete block ranch in Pine Hills, you already know the problem: original jalousie windows and single-pane aluminum frames that bleed conditioned air into Central Florida’s humid heat. Window Installation in Pine Hills typically runs $650-$1,450 per opening installed for energy-efficient replacement units, depending on glass package and frame material. TruePane Windows & Doors handles the whole job from permit to final inspection, and a live person answers when you call (813) 320-9346.
We’re not a franchise crew rotating through town. Our technicians work these CBS-block homes every week, and we know what happens when someone sets a new frame into a wall opening that shifted out of square forty years ago. That knowledge changes how we anchor, seal, and flash every unit. If you want a straight answer about what your Pine Hills home actually needs, call us. You’ll get one.
Why TruePane Windows & Doors Is Pine Hills’s Preferred Energy-Efficient Windows Company
Pine Hills housing stock is a specific animal. Concrete block walls, original jalousies, slab movement, decades of humidity. A company that only does new-construction vinyl replacements in Orlando subdivisions will fight these houses. We don’t. We started with second-generation glazier Dale Kessler in 2008, and the rule has not changed since: if the pane is not true, the job is not done. That means shimming out-of-square rough openings, foam-sealing every jamb, and registering both manufacturer warranty layers in writing before the truck leaves your driveway.
Our Pine Hills customers call us for two reasons: the window failed, or the last contractor did. When we show up, the technician is background-checked, uniformed, and prepared to measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. No verbal estimates that shift later. The 90-Day Done Right Promise covers workmanship with no paperwork fights, and The Keystone Standard puts both warranty layers in writing. We stand behind it.
Response time to Pine Hills is straightforward: call (813) 320-9346, a live person answers 24 hours a day, and we schedule a date we keep. We’ll be there when we say. That’s the whole arrangement.
Our Energy-Efficient Windows Services in Pine Hills
The dominant job in Pine Hills is not a simple glass swap. It’s removing a jalousie or corroded aluminum frame from a CBS opening, addressing the concrete anchor points, and setting a modern energy-rated unit that passes Orange County code. Here’s how we handle the most common requests.
ENERGY STAR Replacement Windows
Most Pine Hills ranches have original windows that predate ENERGY STAR entirely. When we replace them, we anchor the new frame into the concrete block with the correct fasteners and seal the rough opening so the unit actually performs to its rating. A typical ENERGY STAR single-hung for a Pine Hills ranch runs $700-$950 per opening. Double-hung units with upgraded glass run $850-$1,200. Count on a permit and inspection, because Orange County requires both for any window replacement.
Low-E & Argon Gas Glass
Low-E coatings and argon gas fill are what make a window actually cut heat gain in Pine Hills. Inland Central Florida heat is relentless, and a clear-glass window is a greenhouse. Low-E glass paired with argon runs $150-$350 more per unit than standard clear glass, and for a west-facing Pine Hills bedroom wall, that upgrade pays back in lower AC bills. We explain the exact U-factor and SHGC numbers on paper before you decide anything.
Double & Triple Pane Windows
Single-pane jalousies measure about R-1. A double-pane insulating unit with Low-E and argon measures R-3 to R-4. Triple pane gets you further, but the added weight requires a sturdier frame and better anchoring into CBS. In Pine Hills, double pane is the right answer for about 90% of homes. Triple pane makes sense for north-facing bedrooms or homes on busy streets where sound matters. Expect $950-$1,450 per triple-pane opening installed.
UV-Blocking & Fade Protection
Pine Hills sun is hard on everything it touches: hardwood floors, upholstery, wall paint, family photos. UV-blocking glass cuts the fading spectrum without making the room dark. For a living room with a big east-facing picture window, UV-blocking Low-E glass runs $800-$1,100. We can show side-by-side samples so you see exactly what the coating does before you buy.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pine Hills
We’re an authorized installer for more than a dozen manufacturer lines, and for Custom Windows & Doors in Pine Hills we commonly quote Simonton, PGT, and Ply Gem side by side on paper. Simonton double-hungs work well in CBS retrofits. PGT makes impact-rated units that address the security angle for those old jalousie openings. Ply Gem offers a solid mid-range option that holds up in humidity. We register both manufacturer warranty layers in writing, and our workmanship is covered by the 90-Day Done Right Promise.
Common Energy-Efficient Windows Problems We See in Pine Hills Homes
- Jalousie glass slats popped out by intruders. This is a Pine Hills-specific problem. Louvered glass offers almost no resistance to a pry tool, and once a slat is gone, the house loses conditioned air and security at the same time. The fix is full replacement with impact-rated glazing, not caulk.
- New frames racking and leaking because the rough opening was never corrected. Decades of slab movement leave CBS openings out of square. If the installer skips shimming and foam-sealing, the new window binds or leaks within a season. We square every opening before any frame goes in.
- Aluminum single-pane sills corroding from humidity condensation. Fifty years of moist air condensing on aluminum sills eats the metal from the inside. The frame looks fine until you pull it, then it crumbles. If the sill is corroded, the old frame cannot carry a new unit.
- Fogged or failed seals from stopped-up weep holes. Pine Hills gets heavy afternoon rains, and old frames with clogged weep holes hold water against the glass edge. Seal failure follows. A fogged window is a dead window, and it’s not coming back.
Pricing for Energy-Efficient Windows in Pine Hills, FL
Here are real ranges for Pine Hills, not national averages. Expect the following per opening, installed:
Typical Pine Hills Window Costs
| Window Type | Typical Range Per Opening |
|---|---|
| ENERGY STAR single-hung, clear glass | $650-$850 |
| ENERGY STAR double-hung, Low-E + argon | $850-$1,200 |
| Triple-pane, Low-E + argon | $950-$1,450 |
| Impact-rated replacement for jalousie opening | $1,100-$1,600 |
| Full jalousie-to-double-hung conversion | $900-$1,400 |
What moves the price in Pine Hills specifically is the condition of the concrete block rough opening. If the opening is square and the old frame anchor points are sound, the job is routine. If decades of slab movement left the opening out of square, we shim and seal accordingly, and that labor is written into the quote. No surprise line items. You get a written line-item quote at the estimate, and we honor it. Call (813) 320-9346 to schedule your free estimate.
We Also Serve Cities Near Pine Hills
From Pine Hills we regularly run crews to Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those communities and weighing Energy-Efficient Windows for a CBS ranch or any other home style, the same team and the same written-pricing standard apply. For a full look at what we do in the area, see our Energy-Efficient Windows in Pine Hills page.
Serving Pine Hills, FL - Our Local Coverage Area
We’re based in the Pine Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Pine Hills
Yes. Orange County requires a permit and inspection for any window replacement, including jalousie-to-insulated conversions in Pine Hills. We pull the permit, schedule the inspection, and confirm the new U-factor and SHGC meet Florida Building Code before we close the job. Call (813) 320-9346 and we’ll handle the paperwork from start to finish.
Concrete block anchoring takes longer and demands specific fasteners, shims, and sealants that a wood-frame house never needs. In Pine Hills, the rough opening often sits out of square after decades of slab movement, so we correct the opening before setting the frame. That labor is real and it’s the difference between a window that lasts and one that racks. We write it into the quote so there’s no surprise.
No. Jalousie frames are louvered, single-pane systems that cannot accept an insulated Low-E unit. The slats also fail current Florida Building Code wind-load standards and remain a break-in risk. Keeping the frame means keeping all three problems. A full replacement with an impact-rated or insulated unit is the only fix that addresses energy loss, security, and code all at once. Call (813) 320-9346 for a straight quote.
We shim and foam-seal the rough opening until it’s square and level, then set the new frame. Skipping this step is why cheap installs in Pine Hills leak and bind within a year. On a stretch of Hastings Street, our crew replaced a row of leaking jalousies with Simonton double-hung units and Pine Hills Glass Railing Systems featuring low-E glass and argon fill. The rough openings had shifted out of square over decades, so we shimmed and foam-sealed each jamb before setting the fusion-welded frames, then applied flashing tape and finished with a permit inspection that confirmed the new U-factor and SHGC met Orange County code. That’s the standard, not the exception.
Fog between the panes, a milky haze you can’t wipe off, or visible moisture beading inside the glass means the seal has failed. The argon is gone, the insulating value is gone, and the window is done. A failed seal means the glass package must be replaced, which typically runs $450-$750 per sash depending on coating. If the frame is sound, it’s a glass-only job. If the frame is corroded at the sill, it’s a full replacement. Call (813) 320-9346 and we’ll tell you which one you’re looking at, for free.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Our Energy-Efficient Windows team serves Pine Hills with the same standard Dale’s family has kept since 2008: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.