Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across North River Shores
Impact windows and doors in North River Shores have to do two jobs at once: pass Martin County’s wind-load code and survive river air that eats aluminum. Most homes here sit within a mile of the North Fork of the St. Lucie River, and the salt-laden southeast wind off the inlet accelerates frame corrosion and seal failure on south- and east-facing elevations far faster than inland communities just a few miles west. We quote, permit, and install FBC-compliant impact products rated for this specific riverfront exposure, and we register both warranty layers in writing before the truck leaves your driveway. Call (813) 320-9346 for a free estimate on Impact Windows & Doors sized to your home, your elevation, and the wind pressures Martin County actually enforces.
TruePane has served Impact Windows & Doors in North River Shores long enough to know which 1970s riverfront homes still carry original jalousie frames corroded past saving, and which newer builds need a straightforward same-size replacement with a permit pulled and an inspection passed. The local work here is specific, and the estimate should be too.
Key Takeaways for North River Shores Homeowners
- Wind-load rating matters here. North River Shores sits in Martin County’s wind-borne debris region, and riverfront elevations face design pressures that a generic inland product may not carry.
- Salt air changes the hardware spec. Marine-grade hinges, rollers, and locks are not an upgrade here. They are the minimum for doors on river-facing walls.
- A permit is not optional. Even same-size impact window swaps require a Martin County impact-product permit and a passing inspection. Cheap quotes that skip this leave you without insurance documentation after a storm.
- Original jalousie windows usually cannot be reglazed. Once the aluminum frame has corroded from decades of river air, the rough opening often needs rebuilding before new impact windows go in.
Why TruePane Windows & Doors Is North River Shores’s Preferred Impact Windows & Doors Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That standard means something specific in North River Shores, where a window that passes a visual check but carries the wrong Florida Product Approval number will fail a Martin County inspection, and a door hung with standard hardware will bind within two seasons of river air. Our crews measure every opening twice, quote manufacturer lines side by side on paper, and pull the impact-product permit before work starts.
We send background-checked, uniformed technicians into North River Shores homes, and we work the way we would in our own mother’s house. Every install carries a 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, no paperwork fights and no arguing. A live person answers our phone 24 hours a day, seven days a week, not a voicemail tree and not a regional call center. When a North River Shores homeowner calls, a person picks up.
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, Andersen, Pella, and Marvin, and we stock local replacement parts for the impact products most common in Martin County riverfront homes. That means shorter turnaround on service calls along North River Drive and the surrounding streets, and a parts counter that does not have to order from Miami every time a roller fails.
Our Impact Windows & Doors Services in North River Shores
Hurricane Impact Windows
The core work in North River Shores is Custom Windows & Doors in North River Shores: replacing original single-pane aluminum and jalousie windows with impact-rated units that carry Florida Product Approval numbers matching Martin County’s wind-load requirements. We install fusion-welded frames on river-facing elevations, not mechanically joined corners, because salt air finds seams. The glass package on a typical riverfront home here is impact-rated laminated glass with low-E coating and argon fill, set into frames with marine-grade hardware and flashed with butyl tape so the rough opening stays dry.

Wind Mitigation & Code Compliance
Every impact install in North River Shores requires a Martin County impact-product permit and a passing inspection. We handle both, and we leave you with the documentation: the permit record, the inspection sign-off, and the product approval numbers your insurance carrier will ask for after a storm. A quote that skips the permit saves a few hundred dollars on paper and risks a denied claim later. We do not write quotes like that. This is also the service for homeowners who need a wind mitigation inspection tied to insurance discounts, where the documented rating of your openings directly affects your premium.

Impact Sliding Glass Doors
Riverfront homes in North River Shores lean heavily on North River Shores Sliding & Patio Doors facing the water, and those southeast elevations take the worst of the salt-driven wind. We install impact-rated sliders with marine-grade stainless rollers and reinforced interlocking stiles that stay square under wind pressure, plus sills designed to shed driving rain. The hardware spec matters more here than almost anywhere else we work in Martin County because a standard roller will seize and a standard lock will corrode within a few seasons of river air.

Impact Entry & French Doors
Entry and French doors on North River Shores homes have to do double duty: they are the primary wind-rated opening on a front or river elevation, and they are the door that gets used every day. We hang them plumb, shim the frames properly, and adjust the hinges so the door does not bind in July humidity or after the house settles. On older riverfront homes, we often find the original door frame itself has degraded to the point where a new impact door requires a full frame-out rebuild, not just a slab swap.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North River Shores
We install and service impact products from PGT, CGI, and Simonton, among more than a dozen manufacturer lines we are authorized to carry. The right brand for a North River Shores home depends on the elevation, the design pressure rating required for that specific wall, and the finish that will hold up against river air. We quote the lines side by side on paper so you see exactly what you are buying and what each product approval covers. If you already have impact windows from one of these manufacturers and a seal has failed or a sash has started to bind, we service them under the terms of the registered warranty, and we keep common replacement parts for Martin County riverfront products on hand for faster turnaround.
Common Impact Windows & Doors Problems We See in North River Shores Homes
- Corroded aluminum frames on original jalousie windows. Decades of salt-laden southeast wind off the North Fork of the St. Lucie River corrodes jalousie frames to the point where the glass cannot be safely reglazed. The rough opening often needs rebuilding before a new impact window can be set, which changes the scope and the price.
- Seal failure on south- and east-facing impact glass. Even impact-rated windows installed with non-marine hardware or mechanically joined frames can lose their seal within a few years on river elevations. This shows up as fogging between panes and a loss of the insulating gas fill.
- Sliding door rollers and locks seizing from salt air. Standard door hardware has no business on a riverfront wall in North River Shores. Marine-grade stainless rollers and locks are the minimum for a door that will open and close smoothly for more than a couple of seasons.
- No permit, no inspection, no insurance documentation. We see installs where impact windows were put in without a Martin County permit to save a few hundred dollars. When the homeowner files a storm claim, the carrier asks for the impact-product permit and inspection record, and the homeowner has neither.
Pricing for Impact Windows & Doors in North River Shores, FL
A typical impact window replacement in North River Shores runs $900 to $2,400 per opening installed, depending on the size of the window, the elevation it faces, and the design pressure rating the specific wall requires. Impact sliding glass doors on river-facing elevations run $3,800 to $8,500 installed. Impact entry and French doors run $2,800 to $7,000 depending on configuration and hardware spec. These are installed prices that include the Martin County impact-product permit, the inspection, the flashing, and the hardware rated for river air exposure. A quote that comes in well below these ranges is almost always skipping the permit or the marine-grade hardware or both. Call (813) 320-9346 and we will give you a written line-item quote, side by side by manufacturer, with the warranty durations stated in writing. The estimate is free, and the number on the paper is the number on the bill.
We Also Serve Cities Near North River Shores
TruePane works throughout Martin County and the neighboring communities, including North River Shores, Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If your home sits outside North River Shores proper but faces the same river corridor, the same salt air, and the same wind-load requirements, call (813) 320-9346 and we will schedule an estimate.
Serving North River Shores, FL - Our Local Coverage Area
We’re based in the North River Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in North River Shores
Yes. North River Shores is in Martin County’s wind-borne debris region, and riverfront elevations on the North Fork of the St. Lucie River are subject to design wind pressures that require impact-rated products carrying a Florida Product Approval number that matches the specific design pressure for that wall. A window approved for an inland Martin County home may not carry the rating your river-facing elevation requires. We determine the required design pressure for each opening before we quote the product, and the permit application includes the approval numbers so the inspection passes cleanly. Call (813) 320-9346 with your address and we will tell you what your elevations actually require.
In most cases the aluminum frames are too far gone from decades of salt air to reglaze, and the rough opening has to be rebuilt before any new impact window goes in. We see this regularly on 1960s and 1970s riverfront homes along North River Drive, where the jalousie frames look intact from the inside but have corroded through at the corners and sill. The replacement path is a full jalousie-to-impact retrofit: remove the old frame, rebuild the rough opening, install an impact-rated window with the correct Florida Product Approval, pull the Martin County permit, and pass the inspection. The job takes longer and costs more than a simple glass swap, but it is the only path that passes code and holds up in a claim.
It changes the hardware spec entirely. The salt-laden southeast wind that runs up the river and across canal frontage accelerates corrosion on standard door rollers, hinges, and locks, so river-facing doors in North River Shores need marine-grade stainless hardware rated for coastal exposure. That is not an upgrade we upsell; it is the minimum for a door that opens and closes properly for more than a couple of seasons. On a 1970s riverfront home off North River Drive, our crew removed original sliding door hardware that had seized into white corrosion powder from years of river air, and the replacement spec was stainless throughout. Call (813) 320-9346 for a door quote with the hardware line item spelled out.
Yes. Martin County requires an impact-product permit for impact window replacement even when the new units are the same size as the old ones, and the install must pass a county inspection before the job is closed out. The permit record and inspection sign-off are also the documents your insurance carrier will ask for if you file a storm damage claim. We pull the permit, schedule the inspection, and hand you the paperwork when the job is done, with both warranty layers registered in writing before the truck leaves the driveway. Any quote that does not include the permit is leaving you exposed.
You need a product with a Florida Product Approval that matches the design pressure rating for the specific wall it is going into, not just any impact window from any Florida manufacturer. Some products are approved for inland wind zones but not for the higher pressures on riverfront elevations in North River Shores. We quote manufacturer lines side by side, including PGT, CGI, and Simonton, and we match each product approval number to the design pressure your elevation requires before we write the estimate. Call (813) 320-9346 and we will walk you through the approval numbers in plain language.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving North River Shores and Martin County with impact windows and doors installed to code and registered in writing.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After