Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Palm Beach Shores
Impact windows and doors in Palm Beach Shores typically run $900-$1,400 per opening for a standard impact window, while impact sliding glass doors start around $3,800 and run up to $9,000 depending on width and frame material. Most condo and single-family projects in this town finish within two to three days per unit, and we schedule Palm Beach Shores jobs with a live person who answers the phone at (813) 320-9346. If you live on Singer Island, you already know salt air hits from both the Atlantic and Lake Worth Lagoon. That changes what hardware and frames actually survive here.
We’ve worked enough doors and windows along South Ocean Avenue, Inlet Way, and the low-rise condo rows near the Lake Worth Lagoon side to know the difference between a coastal-spec install and one that looks fine for three years, then starts binding and pitting. Our Impact Windows & Doors team specs for the actual conditions on this barrier island, not for a mainland Palm Beach County average. That detail matters more here than almost anywhere else in the county.
Why TruePane Windows & Doors Is Palm Beach Shores’s Preferred Impact Windows & Doors Company
We’re not the cheapest bid in Palm Beach Shores and we don’t try to be. We’re the company you call when you want the window set true the first time and a warranty registered in writing before the truck pulls out of the driveway. That’s been our standard since Dale Kessler started the company, and it has not drifted. Every job we finish along Inlet Way or up toward the Palm Beach Shores Resort carries the same 90-Day Done Right Promise. If the pane isn’t true, the job isn’t done, and we come back and make it right without making you argue for it.
Palm Beach Shores homeowners tend to be people who’ve lived here a long time, or who winter here and pay attention to what salt air does to their building. They’ve seen the neighbor’s windows fog after two seasons. They’ve watched hardware seize on the ocean side of the building while the lagoon side held up better. They ask good questions and they check the fine print. We meet that with written line-item quotes, side-by-side manufacturer comparisons on paper, and both warranty layers registered before the crew leaves. No paperwork fights later. No second appointment hanging.
When you call, a live person picks up. Not a voicemail tree, not a callback form. Twenty-four hours a day, seven days a week. If you’re in Palm Beach Shores and you need to know when we’ll be there, you’ll hear a real voice tell you.
Our Impact Windows & Doors Services in Palm Beach Shores
Hurricane Impact Windows
Most of the condos and single-family homes in Palm Beach Shores were built between the 1950s and 1970s, and many still carry original aluminum jalousie or single-pane frames. Those windows don’t meet Palm Beach County wind-borne debris requirements, and on a barrier island with water on two sides, they’re the first openings to fail during a storm. We replace them with Florida Product Approved impact windows, commonly from Simonton, PGT, or CGI, and we specify stainless-steel or marine-grade hardware as the baseline, not an upsell. In Palm Beach Shores, standard hardware is the wrong hardware. Salt spray from the Atlantic and Lake Worth Lagoon destroys it within a few years.
Impact Sliding Glass Doors
Sliding glass doors take the most abuse in Palm Beach Shores because they’re usually facing a balcony or a patio, which means direct exposure to salt-laden wind from either the ocean side or the lagoon side. We replace old tracks, rollers, and frames with impact-rated systems that use marine-grade stainless rollers and reinforced frames. On a 1960s condo building along South Ocean Avenue, our crew replaced original jalousie windows with impact-rated double-hung units from Simonton. The old aluminum frames had severe pitting and the operator hardware was frozen solid from salt corrosion. We installed stainless-steel hinges and fusion-welded frames with marine-grade flashing tape, and sealed all jambs to stop salt-laden air from reaching the insulated glass units. The same standard carries to every sliding door we set in this town.
Impact Entry & French Doors
Entry doors on Singer Island face a problem you don’t see much inland: the hinge side and the strike side corrode unevenly because one side gets more wind-driven salt spray than the other. That uneven wear throws the door out of square and makes it bind in July humidity. We install impact-rated entry and French doors with stainless hinges, marine-grade thresholds, and full perimeter sealing. We measure every opening twice. We quote the manufacturer lines side by side on paper so you see exactly what you’re paying for and which warranty applies to each component.
Impact Garage Doors
Garage doors in Palm Beach Shores are often the largest single opening on the structure, and on a barrier island tip with high sustained wind exposure, a non-impact garage door is a serious weak point. We install wind-rated impact garage doors and reinforce existing tracks and mounting hardware to meet Palm Beach County code. If insurance is reviewing your policy and flagging the garage door, this is usually the first item they call out. We handle the full replacement and document everything for the wind mitigation report.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach Shores
We’re an authorized installer for more than a dozen manufacturer lines, and in Palm Beach Shores we find ourselves quoting Simonton, PGT, and CGI most often. These three hold up well in bidirectional salt air when paired with the right hardware. We stock local parts for these brands so Palm Beach Shores customers aren’t waiting for a distributor run to Miami when a roller fails or a latch breaks. We quote the brands side by side on paper, with the frame material, glass package, and hardware listed separately, so you can compare actual numbers instead of sales language.
Common Impact Windows & Doors Problems We See in Palm Beach Shores Homes
- Pitted and seized aluminum jalousie frames. Within five to seven years near the shoreline, bidirectional salt spray pits the aluminum and freezes the operator hardware. Windows that can’t close tightly leak air during wind events and make humidity problems worse.
- Early fogging between panes. Salt-laced moisture breaches the edge seal on non-marine-grade insulated glass units. The seal fails, argon leaks out, and the glass fogs within a few seasons. This is the single most common failure we see in Palm Beach Shores condos built before the 1990s.
- Rusted steel hardware on casement and double-hung sashes. Steel window hardware rusts solid, making sashes impossible to open exactly when owners need ventilation during power outages after a storm. We replace with stainless or marine-grade alternatives.
- Binding sliding doors on the lagoon side. The Lake Worth Lagoon side of the island gets direct wind exposure off the water, and rollers and tracks there fail faster than on the ocean side. Most homeowners don’t realize the lagoon side needs the same marine-grade spec as the Atlantic side.
Pricing for Impact Windows & Doors in Palm Beach Shores, FL
You should expect a standard impact window in Palm Beach Shores to run $900-$1,400 per opening for the window itself, installed. Picture windows and large fixed openings push toward $1,800-$2,600. Impact sliding glass doors start around $3,800 for a 6-foot unit and climb to $9,000 for wider openings. Impact entry doors run $2,500-$6,500 depending on glass and frame. Impact garage doors range $3,500-$8,000. These are installed prices with Palm Beach Shores coastal conditions accounted for.
The coastal-spec version of the job costs roughly 15-25% more than an inland-spec quote because stainless-steel and marine-grade hardware, marine flashing tape, and sealed-edge glass packages cost more up front. The cheap inland spec on a barrier island usually fails within five to ten years, and you pay for the whole job twice. We quote it straight and we stand behind it. Call (813) 320-9346 for a free, written, line-item estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
We Also Serve Cities Near Palm Beach Shores
If you’re outside Palm Beach Shores but nearby, we work in Palm Beach Shores and the surrounding communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. The same coastal spec applies anywhere salt air and wind exposure drive the material choices. Our crews route from the South FL office and schedule Palm Beach Shores and nearby work in the same week.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Palm Beach Shores
Marine-grade hardware is a specific alloy blend, usually 316 stainless, designed for continuous saltwater exposure. Standard stainless steel, typically 304 grade, will still pit and rust on a barrier island tip where salt spray comes from the Atlantic on one side and Lake Worth Lagoon on the other. In Palm Beach Shores, standard stainless is the cheap mistake that fails within a few years. Marine-grade costs more up front and saves you a full hardware replacement down the road. Call (813) 320-9346 and we’ll quote both lines so you see the actual dollar difference.
For mid-century condos in Palm Beach Shores, fusion-welded vinyl or heavy-gauge aluminum with a marine-grade finish hold up best. The original aluminum jalousie frames from that era were thin, non-thermal, and prone to pitting. We specify fusion-welded vinyl for most condo replacements because it eliminates corner screws and weep holes that invite salt-laden air into the frame. Where strata or building codes require aluminum, we use heavy-gauge extrusions with a marine-grade powder coat or anodized finish and stainless hardware throughout. We’ll quote both materials side by side so the choice is clear.
Structures on Singer Island fall into a higher wind speed zone than inland Palm Beach County because the island has open water on both sides with no terrain to break the wind. Palm Beach County’s wind-borne debris region sets the baseline, but the actual design pressure ratings required for openings on a barrier island tip are substantially higher, often pushing past DP 50 in elevated or exposed positions. The window system you buy must be Florida Product Approved for impact and rated for the specific wind zone your building sits in. A mainland-spec window will not pass a wind mitigation inspection on Palm Beach Shores. We pull the specific wind load requirements for your building and document every opening for your insurance report.
No, jalousie windows cannot be rebuilt into impact-rated openings with a glass-only replacement. The jalousie frame itself is the weak point: thin aluminum slats, clip-in glass, and hardware that cannot handle wind-borne debris impacts. Any meaningful hurricane protection requires full frame replacement of the jalousie units with impact-rated windows that carry a Florida Product Approval. Adding hurricane shutters over jalousie windows can be a stopgap, but the gaps and leakage remain. In Palm Beach Shores, where insurance carriers are flagging jalousie openings at renewal, full frame replacement is usually the only option that satisfies the wind mitigation inspection. Call (813) 320-9346 for a straight answer on your specific building.
Insurance carriers writing policies in Palm Beach County are aggressively flagging jalousie windows and non-impact openings during renewals because these openings represent the highest wind and debris failure risk on a barrier island. Palm Beach Shores has one of the highest concentrations of original mid-century jalousie windows in the county, so replacement demand here is increasingly insurance-driven rather than elective. After the post-storm claim payouts of recent years, underwriters simply won’t renew a policy on a building with unprotected openings. We document every opening we replace and provide the paperwork your association or insurer needs to prove compliance. If your renewal notice flags windows, call (813) 320-9346 before you respond.
Get a Straight Quote for Palm Beach Shores Impact Windows & Doors
We know Palm Beach Shores. We know what salt air does to the wrong hardware, why insurance carriers are tightening up on jalousie windows, and what it takes to set a window true on a barrier island with wind and water on both sides. You’ll get a live person on the phone, a written line-item quote, and both warranty layers registered in writing before the truck leaves your driveway. The estimate is free.
Call (813) 320-9346 to schedule your free estimate. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores with impact windows and doors built for coastal conditions.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.