Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Palm City
Impact window and door replacement in Palm City runs between $900 and $1,400 per opening for a standard impact-rated window, and $3,500 to $7,000 for an impact sliding glass door, installed. Most full-home replacements in Martin County take two to four days of installation once the permit clears. The real variable in Palm City isn’t labor, it’s the architectural review timeline, which we’ll walk through below. If you’re in Harbour Ridge or Martin Downs and the 2004 windows are fogging or the frames are pitting at the corners, call us at (813) 320-9346. We’ll come out, measure every opening twice, and put a written quote in your hand.
Why TruePane Windows & Doors Is Palm City’s Preferred Impact Windows & Doors Company
Palm City homeowners have a specific kind of house and a specific kind of problem. We know both. Most of the homes we work on here are 1980s-to-2000s concrete-block construction with the original builder-grade aluminum windows still in the openings. Those extrusions don’t hold up forever in this air. When we walk a job on Mapp Road or in the communities off Murphy Road, we already know what we’re going to find: corrosion at the frame corners, weep holes crusted over, and seals that failed years before anyone noticed the fog.
Our Impact Windows & Doors team is built around the way Dale Kessler set this company up in 2008: a second-generation glazier hiring local people, training apprentices into journeymen, and standing behind every install with the 90-Day Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway. We state the durations in the paperwork. You don’t chase a regional call center. A live person answers the phone 24/7, and we schedule Palm City work with enough time on the calendar to do the job once and do it right.
Our Impact Windows & Doors Services in Palm City
We install, replace, and service the full range of impact-rated openings across Palm City, and we pull permits through Martin County for every job that requires one. Here’s what that looks like in practice.
Hurricane Impact Windows
Most Palm City replacements are second-generation jobs. The first wave went in after Frances and Jeanne hit Martin County within weeks of each other in 2004. Those windows are now 20-plus years old. The laminated glass itself may still be sound, but the frames and seals around it are not. We install full-frame impact windows from Andersen, Pella, and Marvin, set to Martin County wind-borne debris standards. In most 1980s and 1990s Palm City homes, a full-frame replacement is the only lasting fix because the original aluminum extrusions have lost their thermal break integrity.
Impact Sliding Glass Doors
A sliding glass door in Palm City takes more wind load than any window on the wall. It’s the largest opening on the back of the house, and on the St. Lucie River side of Palm City, it also takes salt-air exposure that eats aluminum track and roller hardware. We install impact-rated sliding doors with stainless roller assemblies and multi-point locking, sized to the existing opening where the rough framing allows. If the opening has settled, which we see in older riverfront homes, we re-square the rough opening before the new door goes in.
Impact Entry & French Doors
Entry doors and French doors in Palm City’s gated communities are the most HOA-sensitive part of any impact upgrade. The architectural committees in Harbour Ridge and Martin Downs have specific expectations for door style, color, and hardware finish. We pull the community’s design guidelines before we quote the door, so the approval packet matches what the board expects. The door itself gets installed after approval, not before, so you never sit with a tarped opening waiting on a committee.
Impact Garage Doors
Garage doors are the largest single opening in most Palm City homes, and a failed garage door during a storm turns the whole house into a pressure problem. We install impact-rated garage doors with reinforced tracks and struts, sized to the wind load Martin County requires. If your current door is original to a 1980s or 1990s build, in most cases we recommend replacing the door and the track system together, not bracing an old panel that’s already fatigued.
Wind Mitigation & Code Compliance
Palm City sits inside Florida’s Wind-Borne Debris Region. That means every replacement window and door must meet impact-resistance standards or be protected by an approved shutter system under the Florida Building Code. We handle the wind mitigation documentation for your insurance file as part of the job. If your insurance carrier wants a wind mitigation inspection after the install, we’ll coordinate it. The paperwork matters in Martin County, and we’d rather file too much than too little.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm City
We are an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows. In Palm City, we most often quote ViewLux impact windows alongside Andersen and Pella, side by side on paper, so you see exactly what you’re buying and what each line costs. We keep stock of common replacement parts for Palm City jobs: roller assemblies, latch hardware, weatherstripping, and impact-rated glass panels. That means a repair call on a Wednesday doesn’t turn into a two-week wait for a part out of a distributor’s warehouse in West Palm Beach.
Common Impact Windows & Doors Problems We See in Palm City Homes
- Frame-corner and weep-hole pitting on 1980s and 1990s aluminum frames. The brackish air off the St. Lucie River corrodes aluminum extrusions faster than inland Florida air does. Once the frame corners pit, the thermal break goes with them. Caulking over it is a band-aid. The extrusions keep degrading underneath, and the window loses its structural square.
- Seal failure in 2004-era impact glazing. Windows installed after Frances and Jeanne are aging out. The argon fill between the panes escapes over time, the insulated glass unit fogs, and the window’s insulation value drops. You can’t re-seal an IGU in the field. The glass unit gets replaced, or the whole frame goes if the frame is shot too.
- HOA architectural rejections. Palm City’s gated communities are strict about window style, frame color, and door hardware. A contractor who doesn’t pull the guidelines before quoting can put a homeowner in a position where the windows arrive and the board says no. We file the submittal before we order, so the approval is in hand before the truck shows up.
- Sliding door track and roller failure from salt air and humidity. The combination of St. Lucie River moisture and tropical summer humidity accelerates wear on roller assemblies and track hardware. A door that binds in July, the way the old-timers say, usually has a corroded roller or a pitted track, not a structural problem with the panel.
Pricing for Impact Windows & Doors in Palm City, FL
A typical impact window in Palm City runs $900 to $1,400 per opening installed, depending on size, frame material, and glass package. Impact sliding glass doors run $3,500 to $7,000 installed. Impact entry doors start around $2,200 and go up from there based on hardware and sidelites. Impact garage doors typically run $3,000 to $6,500 for the door and track system. What moves the number most in Palm City is HOA compliance: a custom color or a specific style that matches the community’s design guidelines adds cost and lead time. We give every Palm City customer a written, line-item quote before work starts. The number on the quote is the number on the bill. Call (813) 320-9346 to schedule your free estimate.
We Also Serve Cities Near Palm City
Our crews work throughout the region, including Palm City, Stuart, Port Salerno, Jensen Beach, and Hobe Sound. If you’re just outside Palm City limits, call us anyway. We schedule across the Martin County line every week, and the free estimate is the same no matter where the job is.
Serving Palm City, FL - Our Local Coverage Area
We’re based in the Palm City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Palm City
The frames themselves are failing. Original 1980s and 1990s builder-grade aluminum single-hungs in Palm City corrode at the extrusions from decades of brackish St. Lucie River air. Once the corner joints and weep holes pit, the frame loses its thermal break and its square. You can replace the glass, but the frame will keep degrading around it. Call (813) 320-9346 and we’ll tell you honestly whether your frames are worth saving or whether a full-frame replacement is the only fix that lasts.
Expect two to five weeks added to the calendar in most cases. Martin County is deliberate about permitting, and Palm City’s gated communities layer their own HOA architectural review on top. We file the county permit package and the HOA submittal in parallel, as soon as you approve the quote. The windows get ordered after the HOA approval is in hand, not before. It’s slower, but it means nobody sits with an open rough opening waiting on a committee.
In most cases, no, not as full protection. The laminated glass in those windows may still stop debris, but the seals around the glass have been failing for years. Once the argon fill escapes and the IGU fogs, the window’s insulation value is gone. And the frames on those 2004-era installs were often the original builder-grade aluminum, which is now pitting from two decades of river air. Swapping just the glass doesn’t fix a frame that’s losing its square. We’ll show you exactly what’s still sound and what isn’t before we quote anything.
Style mismatch. Harbour Ridge and Martin Downs have written guidelines for window frame color, muntin profiles, and even the visible hardware finish. A window that meets code but doesn’t match the community’s architectural standard gets rejected, and the homeowner eats the cost. We pull the guidelines first, match the quote to them, and file the submittal ourselves. Call (813) 320-9346 and we’ll start with the paperwork, not the product catalog.
We stage it. The permit and HOA submittals go in the moment you sign. Then we order product with a confirmed lead time from the manufacturer. When the approvals clear, we call you to set the installation date, and the windows arrive that week. We don’t gut a wall and then wait. We don’t remove an existing window until the new one is in the truck and the paperwork is in the file. It’s the only way we’ve ever done it in Palm City.
If you’re in Palm City and your 2004 impact windows are fogging, your original aluminum frames are pitting, or your HOA told you exactly what style is acceptable, call TruePane Windows & Doors at (813) 320-9346. The estimate is free. The quote is in writing. And the work is done right the first time, backed by the 90-Day Done Right Promise and The Keystone Standard.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.