Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Pinellas Park
Impact windows and doors in Pinellas Park run $850-$2,400 per opening for most manufactured home and 1950s-1970s CBS replacements, and a full-home job typically lands between $12,000 and $28,000 depending on opening count, HUD-code sizing, and what we find when the old jalousies come out. We’re TruePane Windows & Doors, and we’ve worked enough Pinellas Park homes to know exactly what’s behind those aluminum frames before the first cut is made. Call (813) 320-9346 for a free estimate, and we’ll come out, measure every opening twice, and put your numbers on paper.
This page covers what Pinellas Park homeowners actually need to know about impact-rated window and door work: the manufactured home sizing problem most contractors miss, the salt-air corrosion eating frames throughout the 33781 and 33782 zip codes, and the code upgrades a permit triggers on older CBS walls. No generic filler.
Why TruePane Windows & Doors Is Pinellas Park’s Preferred Impact Windows & Doors Company
TruePane has spent years working the specific housing stock that defines Pinellas Park: concrete block ranch homes from the Kennedy era and a dense network of 55-plus manufactured home communities stretching along 66th Avenue and Park Boulevard. That’s not a niche we stumbled into. It’s the core of the local market, and any contractor who treats every Pinellas Park job like a St. Pete condo replacement is going to order the wrong size units and leave a homeowner with a tarp over an open wall.
Our Impact Windows & Doors team includes technicians who have pulled original jalousie windows out of homes in the Mainlands and the 55-plus parks off Bryan Dairy Road. We know what the rough openings look like. We know which suppliers actually stock HUD-code-compliant units in 30-inch widths. And we know the Pinellas County permitting office’s expectations on wind mitigation paperwork, because we’ve walked dozens of Pinellas Park homeowners through that inspection process.
Every job is covered by our 90-Day Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. If something isn’t done right, we make it right. No paperwork fights. No arguing. Dale Kessler founded this company on a rule that still governs every install: if the pane is not true, the job is not done.
When you call (813) 320-9346, a live person answers. Not a voicemail tree. Not a callback form. A person who can schedule your free estimate and answer questions about impact ratings, HUD compliance, and what the permit will require.
Our Impact Windows & Doors Services in Pinellas Park
Hurricane Impact Windows
Most Pinellas Park homes need full impact-rated window replacement to meet Pinellas County’s roughly 130 mph design wind requirement. For site-built CBS homes, that usually means removing original single-pane aluminum or jalousie windows and setting impact-rated units with proper flashing and sealant. For manufactured homes, it means HUD-code-compliant replacements sized to match the original rough openings, which are typically narrower than residential standards. We quote both pathways accurately, because we measure every opening twice and order from suppliers who actually stock what Pinellas Park homes need.
Impact Sliding Glass Doors
Sliding glass doors in Pinellas Park take a beating from two directions: daily use and salt-laden air that corrodes rollers, tracks, and hardware years earlier than inland locations. When we replace a slider, we inspect the track bed and framing before the new unit goes in. Setting an impact-rated slider into a rotted or corroded rough opening is how you get a door that binds in July and leaks in August. We fix the opening first, then set the door.
Impact Entry & French Doors
Entry doors on Pinellas Park homes, especially manufactured units, often have non-standard slab heights and hinge placements that make off-the-shelf impact doors a gamble. We order from manufacturers who can match the existing rough opening, and we harden the jamb and threshold at the same time. A door that meets wind-load requirements but has a weak jamb is still a failure point in a storm.
Impact Garage Doors
Garage doors are the single largest opening in most Pinellas Park homes, and a non-rated door is the first thing that fails under positive wind pressure during a storm. We replace older garage doors with impact-rated units braced to handle the county’s wind-speed standards, including reinforcing the tracks and header where needed. If your garage carries living space above it, that reinforcement is required by code, not optional.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinellas Park
We install and service impact windows and doors from manufacturers who actually produce what Pinellas Park homes require. That includes Andersen and Pella for site-built replacements for the fusion-welded, HUD-code-compliant units that fit manufactured home rough openings. We’re an authorized installer for more than a dozen manufacturer lines, and we quote brands side by side on paper so you see exactly what each option costs and what you’re getting for it. Parts for common Pinellas Park replacements are stocked locally, which keeps turnaround tight when a window arrives damaged or a hardware set fails.
Common Impact Windows & Doors Problems We See in Pinellas Park Homes
- Manufactured home rough openings that don’t match residential sizes. Homes in Pinellas Park’s 55-plus parks frequently have 30-inch-wide rough openings from the original 1960s-70s construction. A contractor who orders standard impact windows from a St. Pete supplier ends up with units that won’t fit, forcing a costly reorder and leaving the wall open to weather. We measure first, order the HUD-code size, and schedule the install once.
- Salt-air corrosion on aluminum frames and door hardware. The Pinellas Peninsula sits between Tampa Bay and the Gulf, so airborne salt reaches homes miles from open water. That accelerates pitting on aluminum window frames and corrosion on door hardware years earlier than inland Pinellas County. When we remove old windows, we inspect the surrounding framing for failed flashing tape and hidden leaks before setting new units.
- Rotted or undersized wood framing behind 1950s-1970s CBS walls. Pinellas Park’s original CBS ranch homes were built with wood bucks around window openings. Fifty to seventy years of humidity and storm exposure leaves many of those bucks rotted or undersized for modern impact-rated units. Removing the old window reveals it, and code requires a structural repair before the new window goes in. We write that allowance into the contract up front so it doesn’t surprise you mid-job.
- Fogged insulated glass units that fail wind mitigation inspection. A fogged or failed seal in an existing insulated glass unit is a sign of moisture intrusion, and Pinellas County wind mitigation inspectors will flag it. Replacing the IGU alone doesn’t address the frame corrosion or flashing problems that caused it. We replace the full unit with impact-rated glazing and correct the underlying leak path.
Pricing for Impact Windows & Doors in Pinellas Park, FL
A single impact window replacement in Pinellas Park typically runs $850-$1,800 for a standard site-built opening, and $950-$2,400 for a HUD-code manufactured home unit that requires special ordering. Impact sliding glass doors run $2,800-$5,500 installed, while impact entry doors land between $2,200 and $4,800 depending on slab height and jamb hardening. Full-home impact window packages on a 1950s CBS ranch in the 33781 zip code usually fall between $12,000 and $22,000, and manufactured home packages typically run $10,000-$18,000. Structural repairs discovered during removal, such as rotted wood bucks or undersized headers, add $200-$800 per opening depending on scope, and we write those allowances into your contract before work starts. Call (813) 320-9346 for a free, line-item estimate. No change orders on the back end.
We Also Serve Cities Near Pinellas Park
While this page is written for homeowners in Pinellas Park, our crews also work regularly in nearby Dunedin, Largo, Seminole, and Bay Pines. The housing stock and wind-code requirements are similar across mid-Pinellas County, which means the same measuring discipline and manufactured home sizing expertise applies. If you’re one town over and need impact windows or doors, call us.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Pinellas Park
Yes, and this is the single biggest source of failed projects in Pinellas Park. Manufactured homes built under HUD code in the 1960s-70s have rough openings that don’t match the standard residential sizes stocked by most distributors. A typical manufactured home window opening is 30 inches wide, while site-built homes standardize around 36 inches or wider. Ordering off-the-shelf impact windows without measuring the actual rough opening leads to units that don’t fit, costly reorders, and a home left open to weather. We measure every opening and order HUD-code-compliant units from suppliers who stock those sizes. Call (813) 320-9346 and we’ll tell you exactly what your home needs after the first measurement, before you sign anything.
Three things show up regularly in Pinellas Park’s original concrete block homes: rotted wood bucks around the window openings, undersized framing that doesn’t meet current wind-load requirements, and failed flashing tape behind the stucco that has been leaking for years. On homes along 66th Avenue and Park Boulevard where salt air has been working for five decades, we also find aluminum frames so pitted they crumble when removed. All of this triggers code-required repairs before the new impact window can be set. We write allowances for these discoveries into your contract up front, and we price and get written approval for any additional work before we touch it. The inspection happens first, not after the wall is open.
Pinellas County’s Florida Building Code design wind speed is roughly 130 mph, which means any permitted window or door replacement must be impact-rated or product-approved. That applies to site-built CBS homes and manufactured homes alike. For a 1950s ranch, it also means the existing framing around the window has to be brought up to current wind-load standards, which is why we inspect and repair the wood bucks rather than simply sliding a new window into an old hole. The permit office requires wind mitigation documentation, and we complete that paperwork as part of the job. If you skip the permit, you’re inheriting a liability when you sell the home and a potential insurance denial if a storm hits.
A fogged insulated glass unit means the seal between the panes has failed and moisture is inside the glazing. It is not covered by a wind mitigation upgrade, and replacing only the glass doesn’t fix the problem that caused the seal failure in the first place. In Pinellas Park, salt-laden air corrodes aluminum frames and compromises the seal around the glass, so we replace the entire unit with an impact-rated unit and correct the underlying corrosion or flashing issue. A fogged unit also gets flagged during wind mitigation inspections, so it’s a repair you can’t defer if you want the insurance credits. Call (813) 320-9346 for a free assessment.
Because the rough openings in Pinellas Park’s manufactured home parks are HUD-code sizes that most distributors do not stock. A contractor serving St. Pete can pull standard residential impact windows from local inventory and install them the same week. In Pinellas Park, the 30-inch-wide manufactured home units nearly always require a special order from a manufacturer who produces HUD-compliant impact-rated glazing, which adds lead time. The second factor is the condition of the surrounding opening: original 1960s aluminum frames have often corroded to the point where reframing is required before the new window is set. We factor both into the schedule and give you a realistic completion date. Call (813) 320-9346 for a timeline on your specific project.
If you’re in a Pinellas Park manufactured home park off 66th Avenue or a 1950s CBS ranch near Park Boulevard, and your windows are original jalousies or your sliding door binds every summer, we should talk. We’ll measure, inspect, and give you a written line-item quote that accounts for HUD-code sizing, salt-corrosion repairs, and the permit upgrades your wall will need. Call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinellas Park and mid-Pinellas County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.