Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Impact Windows for Tampa Homeowners
Impact windows in Tampa are not an upgrade; they’re a working part of the house, and they have to hold up against hurricane season, salt air, and the kind of afternoon thunderstorms that test every seal in the building. We install, replace, and service residential impact windows across Tampa with one standard: both manufacturer warranty layers registered in writing, durations stated, and a 90-Day Done Right Promise on every job. Dale Kessler founded TruePane Windows & Doors in 2008, but the craft runs much deeper than that: years of glazing tradition, second-generation, with local technicians who measure every opening twice and quote manufacturer lines side by side on paper. If you suspect a window was installed out of true, or if a seal has fogged and the manufacturer is giving you the runaround, call us at (813) 320-9346. A live person answers, 24 hours a day, 7 days a week.
What Our Impact Windows Service Includes
Every impact window job starts with a clear-eyed look at what’s actually in the opening. We’re not there to sell you a line; we’re there to install glass that stays put and frames that close square. Here’s what we cover under impact windows service.
Impact Window Installation
New impact window installation means full-frame or retrofit replacement, depending on the condition of the existing buck and the wall assembly. In Tampa’s older neighborhoods, houses built before 2002 often have framed openings that have settled, and a true retrofit requires shimming and flashing that a production crew will skip. TruePane measures every opening twice, shims square, flashes to code, and registers the manufacturer warranty layers before the truck leaves your driveway. We install as though the next hurricane is already named.
Impact Window Replacement
When a window fails, whether the laminate is delaminating, the seal has fogged, or an old single-pane unit just does not meet current wind-load requirements, replacement is a matter of matching what’s there and improving it. We handle full replacement of impact-rated windows and doors, pulling the old unit out clean, checking the rough opening, and setting the new unit true. Tampa homeowners in areas like Palma Ceia and Davis Islands deal with salt corrosion on frames that inland homes never see, and we account for that before we order the unit.
Impact Window Repair
Not every failing impact window needs to be replaced. A binding sash, a failed balance, a worn weather seal, or a cracked outer lite on an otherwise sound unit can often be repaired. We stock OEM parts for major manufacturers and will tell you plainly when a repair is throwing good money after bad. If the pane is not true, the job is not done; that rule governs repairs too.
Impact Window Glass Replacement
A cracked impact-rated laminated lite does not always require a full window unit. In many cases, the frame and sash are fine, and the glass pack can be replaced to match the original designation. We order glass to exact specification, replace the glazing, re-bed the unit, and verify the seal before we call it done. This kind of surgical repair is exactly where out-of-true installs happen, so we measure the rabbet depth and glass thickness, not just the visible dimensions.
Hurricane Shutter Integration
Some Tampa homes have both impact windows and accordion or roll-down shutters, and the two systems must work without fighting each other. We inspect clearances, mounting surfaces, and operator mechanisms when we install or replace impact windows so the shutters still deploy and retract clean. If you’re in a flood zone or a wind-borne debris region, this coordination matters more than most contractors admit.
High-Sill and Difficult Access Installations
Tampa has plenty of homes where the windows are not accessible from a step ladder: second-story front elevations, zero-lot-line conditions, and houses built over carports. We handle those openings with the equipment and care they require. Our technicians are background-checked, uniformed, and trained on difficult access as standard practice, not as a change order.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Impact Windows
We install and service PGT impact windows weekly. PGT built its reputation in Florida, and their WinGuard and Impact Resistant lines are common in Tampa homes. We know their laminate specifications, their mounting flange tolerances, and their warranty registration process well enough to quote them side by side against other lines on paper, so you see exactly what you’re buying.
We also work with Therma-Tru and Mr-Glass units, along with other manufacturer lines where the homeowner already has an established brand preference. Whether you have PGT, Therma-Tru, Mr-Glass, or any other make, we can help. The brand is not the problem; the install is. We’re an authorized installer for more than a dozen manufacturer lines, and we treat each one to its own spec, not a one-size-fits-all approach.
Signs You Need Impact Windows Right Now
- Fog between the panes. A failed seal is not cosmetic. Once moisture gets between the lites, the insulating value drops and the glass starts to break down. If you can wipe the inside of the window and the fog is still there, it’s between the panes and the seal is gone.
- Water staining on interior drywall below a window. That’s a flashing or sealing failure, and in Tampa’s rainy season it gets worse every week. We trace the leak to the actual source: the jamb flashing, the sill pan, or the window-to-wall interface.
- Windows that rattle in wind or bind in the frame. An impact window that rattles is a window that’s not seated or shimmed correctly. A window that binds in July is a frame that’s out of square. Both are fixable, and both tell you the original install was not done right.
- Visible cracks or chips in the glass, even small ones. Impact-rated laminated glass can maintain some integrity with a minor chip, but heat and vibration spread cracks quickly. In Tampa’s summer, a chip on a west-facing window can run within weeks.
- Condensation inside the room in winter. Tampa winters are short, but when they show up, condensation on the interior glass means the warm, humid outside air is meeting a cold surface with poor thermal performance. It’s a sign the window has lost its insulating gas fill and likely its seal.
Our Impact Windows Process - Step by Step
- 1
We answer the phone. You call (813) 320-9346 and a live person answers. Not a voicemail tree, not a callback form. We schedule a time that works, and we’ll be there when we say.
- 2
We measure and inspect. Every technician measures every opening twice and documents the condition of the existing frame, flashing, and rough opening. We check for rot, termite damage, and settlement before we ever order a unit. This is where most installs go wrong, so we slow down here on purpose.
- 3
We quote side by side on paper. You see the manufacturer lines, the glass packages, the wind-load ratings, and the prices, all in writing. No surprises on the bill. A square deal, up front.
- 4
We install to true. Shims placed, openings squared, flashing run to code, sealant tooled clean, and both manufacturer warranty layers registered in writing before the truck leaves the driveway. That’s The Keystone Standard.
- 5
We follow up. If something is not done right in the first 90 days, we make it right. No paperwork, no arguing. That’s the 90-Day Done Right Promise, and it’s in writing on every job we do.
How Much Does Impact Windows Cost in Tampa?
A typical impact window replacement in Tampa runs $900 to $2,200 per opening for mid-range vinyl or aluminum frames with laminated impact glass. Full-frame installation on a wood-framed house in Seminole Heights or Tampa Heights runs higher than a retrofit in a block-construction home in Carrollwood, often $1,500 to $3,000 per opening. Factors that move the price: opening size, frame material, glass package, wind-load requirements, accessibility, and whether the rough opening needs repair before the new unit goes in.
The way to avoid overpaying is to know exactly what you’re buying. We quote manufacturer lines side by side on paper, with both warranty layers registered in writing and durations stated. A free estimate includes measurements, condition notes, and a written line-item price. No deposit games, no change orders on a square opening. We offer a permanent 5% discount for seniors and veterans, plus a free written repair estimate. Call (813) 320-9346 for an exact quote. Estimates are free.
Impact Windows Near Tampa - Our Service Area
TruePane Windows & Doors serves Tampa and the surrounding communities in Hillsborough and Pinellas counties, including Apollo Beach, Aripeka, and the neighborhoods around Anna Maria and Azalea Park. Most impact window estimates in the Tampa metro happen within a few days, and once we measure, we can give you a written quote on the spot. If you’re in the greater Tampa area, you’re in our service area. See our work in Impact Windows in Alafaya and Impact Windows in Altamonte Springs.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Impact Windows in Tampa
Impact windows are laminated glass units built to resist wind-borne debris and high wind pressures, tested to Florida Building Code standards for wind-load and missile impact. In Tampa, they’re most often made of two lites of glass with a polyvinyl butyral (PVB) or ionoplast interlayer that holds the glass together if it shatters. They serve as passive hurricane protection and also reduce outside noise and improve energy performance.
Most single-opening installations take one day, and many homes are completed in two to three days depending on the number of windows and the condition of the rough openings. We complete most jobs in a single visit where the scope allows, and that includes registering both manufacturer warranty layers before we leave. Tall or difficult-access openings add time, and we’ll tell you that before we start, not after.
Plan on $900 to $2,200 per opening for typical replacement, with full-frame work running higher. The exact price depends on size, frame material, glass package, and the wind-load requirements of your particular home. We give you a written line-item quote before any work is authorized. Call (813) 320-9346 for a free estimate.
Yes. We install and service PGT impact windows regularly in Tampa, and we stock OEM parts for PGT and other major manufacturers. If you have a PGT unit with a failed seal, a binding sash, or a cracked lite, we can repair or replace it to spec. PGT builds a good window; the weak point is almost always the install.
A live person answers the phone 24 hours a day, 7 days a week at (813) 320-9346. If a window is breached and the house is exposed, we’ll get someone out to secure the opening and assess the damage. For true emergencies after a storm, we prioritize safety-related calls and work with your insurance documentation needs.
Every job is covered by the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If it’s not done right in the first 90 days, we make it right. No paperwork fights, no arguing. We stand behind it.
Clear the area inside and outside each window: move furniture, blinds, curtains, and any wall decor away from the openings. If you have hurricane shutters, make sure they’re retracted or removed before we arrive. We’ll protect floors and walkways, and we’ll walk you through the job scope before any glass comes out. A little preparation on your end keeps the day moving cleanly.
Schedule Your Impact Windows Service in Tampa Today
If your impact windows are fogged, cracked, binding, or just not giving you the protection Tampa weather demands, call TruePane Windows & Doors at (813) 320-9346. A live person answers, we’ll schedule your free estimate, and you’ll get a written line-item quote with both warranty layers registered in writing. Done right, or we make it right. If the pane is not true, the job is not done. Call today.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tampa since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.