Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Bardmoor
Door Installation - Bardmoor projects often start with a 1970s aluminum slider that has finally quit rolling, locked, or sealed. Salt air from the Gulf, only 4-5 miles west, corrodes the original tracks and frames within a decade. We replace them with impact-rated units sized for Pinellas County’s 130-mph design wind speed. Call (813) 320-9346 and we’ll walk the opening with you, free estimate included.
We know Bardmoor because we work here regularly. The homes off Bardmoor Boulevard, the ranchers backing the golf course, the two-story CBS builds along Starkey Road. The original sliders in these houses were never meant to survive 50 years of Florida salt air. Most of them didn’t. Our Sliding & Patio Doors team replaces them, and we do it the same way we’d do it for our own mothers: measure twice, anchor into concrete block properly, register both warranty layers before the truck leaves the driveway.
Dale Kessler founded TruePane Windows & Doors on a rule that still hangs in the shop: if the pane is not true, the job is not done. That rule applies to every slider we install in Bardmoor, every header we inspect, every permit we pull from the Pinellas County Building Department.
Why TruePane Windows & Doors Is Bardmoor’s Preferred Sliding & Patio Doors Company
We’re not the cheapest bid in Bardmoor. We stopped chasing that title years ago. What we are is the company that answers the phone when a homeowner calls about a slider that won’t lock, and the company that shows up when we say we will. A live person answers every call, 24 hours a day, seven days a week. Not a voicemail tree, not a regional call center. A person who can schedule a real appointment in Bardmoor.
Our technicians are background-checked, uniformed, and trained as apprentices before they ever run a job alone. We hire locally. We plan to be in Pinellas County in thirty years, which is why we back every install with a 90-Day Done Right Promise. If it’s not done right, we make it right. No paperwork fights, no arguing. The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before we leave your Bardmoor driveway.
We’ve replaced enough 12-to-16-foot golf-course sliders in Bardmoor to know exactly what’s behind the drywall: undersized headers, rusted fasteners, oxidized jambs. That local knowledge means fewer surprises on installation day and a permit that passes inspection the first time.
Our Sliding & Patio Doors Services in Bardmoor
Patio Sliding Doors
Most Bardmoor homes built between 1968 and 1988 have either a two-panel or three-panel aluminum sliding door leading to a screened lanai or concrete patio, which is why Custom Windows & Doors in Bardmoor remain essential for coastal protection. The original units are not impact-rated and were never designed for the salt air that reaches this far inland. We replace them with impact-rated sliders from Andersen, PGT, or CGI. A standard 6-foot patio slider replacement in Bardmoor typically runs $2,800 to $5,200 installed, depending on impact rating and finish. The salt air here argues for a marine-grade finish, not the bare aluminum that came with the house.
Panoramic Sliding Systems
The golf-course-facing rear elevations in Bardmoor often feature 12-to-16-foot original aluminum sliders. These were installed as a selling point in the 1970s. Today they’re an enormous unprotected opening. Replacing one with a panoramic impact system means marrying two or more panels in a custom multi-track configuration. These projects start around $9,500 and commonly reach $18,000 or more in Bardmoor, because the rough opening usually needs structural work before the new unit can be set. We assess the header before we quote, not after we open the wall.
Heavy-Duty Sliding Doors
Heavy-duty sliders in Bardmoor are not a luxury. They’re what a 16-foot opening demands when wind pressure at 130 mph is trying to push the panel out of its track. We specify reinforced tracks, stainless-steel roller assemblies, and multi-point locking hardware. Window Installation - Bardmoor and heavy-duty sliding door projects generally fall between $6,500 and $14,000, with the upper end covering oversized openings that require custom engineering. The salt in the air means every fastener we touch gets upgraded to stainless or hot-dip galvanized. Cheap zinc hardware rusts in five years here.
Pocket & Barn Doors
Pocket doors and barn doors work differently in Bardmoor than they do inland. The humidity and salt air make untreated wood barn doors swell and bind within a season or two. We install sealed, marine-grade alternatives and pocket door hardware rated for coastal exposure. Pocket door replacement in Bardmoor runs $1,800 to $4,200 for a standard interior opening. Barn door hardware and installation is comparable, though custom slabs add material cost. Screen door installation for Bardmoor lanais is a smaller job, typically $350 to $800 for a quality sliding screen assembly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bardmoor
We are an authorized installer for more than a dozen manufacturer lines, and the Bardmoor jobs tend toward three specific brands: PGT for value-priced impact ratings, CGI for coastal-grade aluminum, and Simonton for mid-range vinyl sliders that hold up to salt air without breaking the budget. We quote manufacturer lines side by side on paper, so you see exactly what you’re buying and what each warranty actually covers. We stock common replacement parts for these brands in our local service vehicles, which means a roller replacement on a PGT slider in Bardmoor usually doesn’t require a second appointment.
Common Sliding & Patio Doors Problems We See in Bardmoor Homes
- Corroded aluminum tracks and jambs. Salt-laden air from the Gulf, 4-5 miles away, dulls the finish and pits the aluminum on original sliders. Within 8-10 years, rollers stop rolling and the sash won’t seat in the lock. The finish isn’t a cosmetic problem. It’s structural.
- Seal failure from thermal cycling and salt. The insulated glass units in older Bardmoor sliders fog between the panes. That means the seal has failed, the gas has leaked out, and the glass is no longer doing its job for energy efficiency or storm protection.
- Flexing panels under wind load. Non-impact 1970s sliders bow inward during Pinellas County’s summer squalls. The jamb anchoring in concrete-block walls was never designed for 130-mph design wind speeds. Water blows past the flashing tape and into the wall cavity.
- Oversized golf-course sliders with deficient headers. The 12-to-16-foot original sliders on Bardmoor’s rear elevations frequently hide undersized headers or rusted fasteners. The opening fails a structural inspection and must be reinforced before any permit can be pulled from the Pinellas County Building Department.
Pricing for Sliding & Patio Doors in Bardmoor, FL
A standard 6-foot impact-rated patio slider in Bardmoor runs $2,800 to $5,200 installed. A heavy-duty 12-foot slider lands between $6,500 and $9,500, and a full panoramic system for a golf-course-facing rear elevation starts at $9,500 and can reach $18,000 or more. The variables that move these numbers in Bardmoor are the opening size, the header condition, the impact rating you need for Pinellas County insurance compliance, and whether you choose a marine-grade finish. The marine-grade finish adds roughly 15-20% to the cost of the same slider in a standard finish. It is not an upgrade we recommend skipping here. Call (813) 320-9346 for a written line-item quote. Estimates are free, and the number on the quote is the number on the bill.
We Also Serve Cities Near Bardmoor
Our crews regularly work in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. Many homes in those neighborhoods share the same 1970s-1980s construction patterns and salt-air exposure we see across Bardmoor. Sliding & Patio Doors in Bardmoor means this team, these trucks, and this standard of work, week in and week out.
Serving Bardmoor, FL - Our Local Coverage Area
We’re based in the Bardmoor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Bardmoor
Bardmoor sits inside Pinellas County’s Wind-Borne Debris Region. The entirety of Pinellas County is a narrow peninsula, and wind-driven debris travels well inland during a hurricane. Insurers don’t care that your house is 4-5 miles from the beach. They care that the design wind speed here is 130 mph and the largest unprotected opening in a 1970s Bardmoor home is usually the rear slider. A single non-impact opening can trigger a non-renewal or surcharge, even if every other window is retrofitted. Call (813) 320-9346 and we’ll tell you exactly which openings on your Bardmoor home need to be addressed first.
If the goal is insurance compliance, the answer is almost always full replacement. A repaired original aluminum slider from the 1970s still lacks an impact rating, still lacks a Florida Product Approval number, and still flexes under 130-mph wind loads. Repairing a roller or replacing a lock makes the door operable again. It does not change what your insurer sees when they look at the photograph. We’ll tell you straight: if the slider is not impact-rated, repairing it is a holding action, not a solution. A full replacement with an impact-rated unit is the only way to address the insurance question.
A standard impact slider meets the wind and debris resistance requirements but uses hardware and frame finishes designed for inland conditions. In Bardmoor, the salt air reaches well inland because Pinellas County is a narrow peninsula. That salt oxidizes standard aluminum frames, corrodes standard steel rollers, and degrades standard zinc fasteners within 8-10 years. A marine-grade finish uses a heavier anodized or coated frame, stainless-steel roller assemblies, and hot-dip galvanized or stainless fasteners throughout. The marine-grade version costs about 15-20% more on a like-for-like slider. The cheap spec fails sooner here, and the replacement cycle starts over. We quote both options side by side on paper so the choice is visible.
Look for fog or haze between the two panes of glass that you cannot wipe off from either side. That means the perimeter seal has failed. Salt exposure accelerates this failure because it corrodes the aluminum spacer bar inside the insulated glass unit. Also check the frame corners and the track for white, chalky oxidation that wipes off on your finger. That is the salt reacting with the aluminum. Once the seal is gone, the gas fill has leaked out and the glass carries no meaningful insulating value. A fogged insulated glass unit in a Bardmoor slider is a replacement, not a cleaning. Call (813) 320-9346 and we’ll inspect the glass and the frame on the same visit.
Yes, and this is one of the most common surprises on Bardmoor installations. Many of the 12-to-16-foot original sliders on golf-course-facing rear elevations were framed with headers that were undersized even by 1970s standards. Fifty years of humidity and salt air have not improved them. The Pinellas County Building Department requires a structural inspection before any permit is issued for an opening that large. We handle that assessment as part of our quote process. On a Bardmoor Drive rancher a few years ago, our crew replaced a 14-foot original aluminum slider with a custom-ordered Andersen 400 Series impact-rated sliding door. The old jamb had oxidized so badly from salt air that the sash wouldn’t lock, and the header needed steel reinforcement before we could pull the permit. That job took three days instead of the usual two. We’d rather tell you about the header before we open the wall than after.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.