Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Gun Club Estates
Sliding and patio door replacement in Gun Club Estates typically runs $2,800 to $6,500 for a standard impact-rated unit, and on older CBS ranch homes in this neighborhood, the real wildcard is the rough opening. That’s the opening in your concrete block wall, and in Gun Club Estates, it’s often non-standard. We know this because we’ve been inside enough of these 1970s and 1980s homes to see what’s behind the trim: undersized headers, corroded anchors, wood bucks that have been quietly rotting for a decade. If you’re replacing a slider off Gun Club Road or anywhere in the neighborhood, call (813) 320-9346. We’ll measure the opening, check the anchorage, and give you a written quote that accounts for what Palm Beach County’s inspector is actually going to require.
Why TruePane Windows & Doors Is Gun Club Estates’s Preferred Sliding & Patio Doors Company
We’re not the cheapest bid in Gun Club Estates, and we don’t try to be. We’re the company homeowners call when they want the door replaced once and done correctly. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That rule matters a lot in Gun Club Estates, where the combination of salt air from the Lake Worth Lagoon, concrete block construction, and Palm Beach County’s wind-load enforcement leaves no room for sloppy work.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you’re buying. And when the job is finished, both manufacturer warranty layers are registered in writing before the truck leaves your driveway. That’s the Keystone Standard, and it’s the baseline, not the exception.
Gun Club Estates homeowners have been calling us for years because we answer the phone. A live person, 24 hours a day, 7 days a week. No voicemail tree. No callback form. If something’s wrong with your slider, you talk to a person who can help.
We also stand behind the work with our 90-Day Done Right Promise. If something isn’t right, we make it right. No paperwork fights. No fine print. That’s the deal we’ve offered since 2008 of community service, and we don’t plan on changing it.
Our Sliding & Patio Doors Services in Gun Club Estates
Every service below starts the same way: we inspect the existing opening, verify the anchorage spacing against current Florida Building Code wind-load tables, and write your quote with any structural work priced in. No surprises down the line. No change orders after we open the wall.
Patio Sliding Doors
Most Gun Club Estates homes have a large sliding glass door opening onto a screened lanai. The original units, usually single-pane aluminum from the 1970s or 1980s, are long past their service life. We replace them with impact-rated or shutter-protected units from brands like ES Windows, ECO Window Systems, or sized to your rough opening, not the nearest stock dimension. A typical patio slider replacement in Gun Club Estates runs $2,800 to $5,200 depending on size, finish, and whether the opening needs shimming or header work.

Panoramic Sliding Systems
If you’re opening up a wall to the pool or replacing a dated triple-track slider with something wider, a panoramic system is worth considering. These are multi-panel units that stack or pocket to one side, and they demand precise framing. In Gun Club Estates, where the wind-load requirements are serious business, a panoramic slider has to anchor into a properly reinforced header. We pull the permit, coordinate with Palm Beach County’s building department, and you get a system that opens clean and locks down tight. Budget $6,000 to $14,000 for most installations in this neighborhood.

Heavy-Duty Sliding Doors
Some Gun Club Estates homeowners want a slider that doesn’t flex, doesn’t rattle in a summer thunderstorm, and doesn’t bind when the humidity spikes. Heavy-duty sliding doors with reinforced frames and multi-point locks are the answer. These units handle the salt air and pressure cycling of living a few miles from the Intracoastal without developing track pitting or seal failure the way thin aluminum frames do. We install heavy-duty sliders from brands like Andersen, and we size them so the frame sits square in the opening, not shimmed into a gap. Expect $3,500 to $7,000 for a typical replacement in Gun Club Estates.

Pocket & Barn Doors
Pocket and barn doors are growing in popularity in Gun Club Estates, particularly in ranch homes getting interior updates. If you want a patio slider converted to a pocket configuration, the wall cavity has to be framed properly or the door will bind and sag. In a CBS home, that means cutting into block and installing a steel pocket frame, which is exactly the kind of work the county inspector will want to see anchored to spec. We handle the structural work, the permit, and the install. Barn door conversions on interior openings start around $1,800; exterior pocket sliders run higher depending on the structural scope.

Screen Door Installation
Nearly every Gun Club Estates home with a lanai has a screen door on the patio entrance, and most of them are aluminum frames with torn or sagging mesh. We build and install new screen doors sized to your existing slider opening, with options for pet-resistant screening, tighter mesh for no-see-ums, and upgraded frames that won’t oxidize as quickly in the salt air off the Lagoon. A standard sliding screen door runs $250 to $650 installed.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gun Club Estates
TruePane is an authorized installer for Andersen, ES Windows, ECO Window Systems, and more. That means you get the manufacturer’s warranty registered in writing, not a verbal promise. For our Sliding & Patio Doors team, we carry our own stock of replacement rollers, tracks, weatherstripping, and handles sized for common Gun Club Estates units. If your slider just needs new rollers or a track realignment, we can often handle it in one visit without waiting on a parts order.
Common Sliding & Patio Doors Problems We See in Gun Club Estates Homes
This list is built from actual service calls across Gun Club Estates, not a marketing deck. If your door is doing one of these things, it’s worth a look.
- Corroded tracks from salt air. The Lake Worth Lagoon and Intracoastal Waterway are close enough that salt-laden air moves inland across Gun Club Estates. Thin aluminum slider frames pock and pit within a few seasons, and the track gets so rough the rollers can’t glide. We see this constantly on original 1970s and 1980s units.
- Cracked and delaminating weatherstripping. Sustained summer humidity above 80% combined with salty air is brutal on vinyl weatherstripping. It cracks, delaminates, and stops sealing about three to five years after installation. If you feel air moving around the door edges, that’s what’s happening.
- Rotted wood bucks at the rough opening. Humidity condenses on uninsulated aluminum frames at the jamb, and that moisture runs into the wood buck at the rough opening in older CBS homes. By the time we open the wall, the wood is often gone. Palm Beach County inspectors flag this immediately when the anchorage is exposed, and it has to be replaced with treated stock before the door can go in.
- Non-standard rough openings that don’t match modern frames. The original sliders in Gun Club Estates homes were installed to 1970s rough openings, which are often smaller or dimensionally different from what today’s impact-rated frames require. Installing a stock unit into those openings without proper shimming or custom sizing leaves gaps that fail wind-pressure testing. We size every replacement to the actual opening, not the old door’s measurements.
Pricing for Sliding & Patio Doors in Gun Club Estates, FL
Here’s what you should expect to pay in Gun Club Estates, based on the work we’ve priced and completed in this neighborhood.
- Standard impact-rated patio slider replacement: $2,800 to $5,200
- Heavy-duty sliding door with multi-point locking: $3,500 to $7,000
- Panoramic sliding system (multi-panel): $6,000 to $14,000
- Pocket door conversion (exterior, structural work included): $4,000 to $9,000
- Sliding screen door replacement: $250 to $650
- Header reinforcement for pre-1992 openings: $800 to $2,500 depending on span and condition
- Wood buck replacement at rough opening: $400 to $1,200
What moves the price in Gun Club Estates specifically: whether your home was built before 1992 and needs header reinforcement, whether the rough opening matches a standard frame size, and whether the wood buck has rotted and needs replacement. We write every allowance into the contract before we start. If we open the wall and find something unexpected, you approve the price in writing before we touch it. Call (813) 320-9346 for a free estimate on your specific door.
And we honor two standing offers: a free written repair estimate, and a permanent 5% discount for seniors and veterans. Mention either when you call.
We Also Serve Cities Near Gun Club Estates
Our Gun Club Estates customers are our priority, but we also do sliding and patio door work in nearby communities. If you’re in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, the same TruePane standards apply: measured twice, quoted on paper, permitted and inspected, and registered in writing. Call (813) 320-9346 and ask for the sliding door team.
Serving Gun Club Estates, FL - Our Local Coverage Area
We’re based in the Gun Club Estates area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Gun Club Estates
Yes. Every sliding door replacement in Gun Club Estates must carry a valid Florida Product Approval (FL#) showing compliance with current Florida Building Code wind-load requirements. Gun Club Estates sits within Palm Beach County’s Wind-Borne Debris Region, which is just outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward, so a Miami-Dade NOA is not required, but the FL# is mandatory. We quote only products with current Florida Product Approvals, and we can show you the approval document before you sign. Call (813) 320-9346 if you want the specifics on a particular brand or model.
The most common flag is anchorage spacing that does not meet current wind-load tables. In pre-1992 Gun Club Estates homes, the original framing often falls short of the spacing now mandated, which means the installer has to reinforce the header before the county issues a certificate of occupancy. We account for this in every quote on older homes. When we replaced a corroded original aluminum slider on a 1970s CBS ranch off Gun Club Road, our inspection found the existing jamb anchorage fell short of today’s table. We wrote the header-reinforcement allowance into the contract, pulled the Palm Beach County permit, and had the inspector sign off on the reinforced rough opening before the new ViewLux frame went in. That is the standard on every pre-1992 home we touch.
It’s the proximity to the Lake Worth Lagoon and the Intracoastal Waterway. Salt-laden air pushes inland across Gun Club Estates and settles on aluminum frames, accelerating oxidation. We see track pitting, pockmarks on the frame face, and seal failure within a few seasons on thin aluminum units that would last a decade further west. The fix is a heavier-gauge aluminum or composite frame with a factory finish rated for coastal exposure, plus regular hardware replacement. Call (813) 320-9346 and we’ll tell you whether your frame is worth saving or time to replace.
It depends on the rough opening, and in Gun Club Estates, the answer is often that you need a custom or semi-custom unit. The original 1970s and 1980s sliders were installed into openings that do not match modern impact-rated frame dimensions. Sometimes proper structural shimming gets you there; sometimes the opening has to be resized or the frame ordered to non-standard dimensions. We measure the actual opening, compare it to the manufacturer’s frame schedule, and quote you exactly what fits. No guesswork. No gaps that fail wind-pressure testing.
No. The Palm Beach County code treats a lanai door differently from the main structural slider. If your lanai is not part of the conditioned envelope and the main patio slider already provides the impact protection, the screen door can typically be a standard, non-impact unit. But the main patio slider absolutely must meet the wind-load and product approval requirements. If you’re unsure whether your setup qualifies, call (813) 320-9346 and we’ll walk you through it before you spend any money.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Gun Club Estates with sliding and patio door replacements built on years of community commitment and a rule that hasn’t changed: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After