Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across South Pasadena
Sliding door replacement in South Pasadena typically runs $1,800 to $4,900 installed, depending on size, impact rating, and what we find when the old door comes out. On older condos near Boca Ciega Bay, you’re usually looking at the higher end because the rough opening was poured for a door size nobody has manufactured in forty years, and the flashing underneath has failed. A patio door in South Pasadena is not a simple swap. The salt air here attacks aluminum tracks, rollers, and thresholds from both the bay side and the Gulf side, which means the hardware question is not optional. Call (813) 320-9346 and we will tell you straight what the job needs and what it costs.
We’re TruePane Windows & Doors, and we’ve been setting sliding doors square in Florida’s coastal condo stock long enough to know what hides behind a 1972 aluminum slider in South Pasadena: corroded tracks, dry-rotted sub-sills, undersized openings, and flashing that gave up years ago. Most homes here were built in the 1960s and 70s, and the original doors were never meant to hold up to four decades of salt spray from two directions at once. Our crews work South Pasadena regularly. Dispatch and scheduling are coordinated from our South Florida office; the technicians who show up at your door live and work in Pinellas County.
If you’re dealing with a slider that grinds, sticks, leaks, or lets the afternoon heat pour through, the fix is rarely a squirt of lubricant and a new piece of weatherstripping. It’s a door that fits the opening, meets Florida impact code, and holds its line in salt air. That’s what we install. Call (813) 320-9346 for a free estimate.
Why TruePane Windows & Doors Is South Pasadena’s Preferred Sliding & Patio Doors Company
South Pasadena is a small city, just over four square miles, and word travels fast here. When a condo board approves a door spec, every unit owner hears about it. We’ve done work in this market long enough to know that the board approval is as important as the install. That’s why our estimators bring manufacturer spec sheets and impact-rating documentation to the first visit. Boards in South Pasadena need product details in writing before they’ll approve anything, and owners need a contractor who knows how to navigate that process without stalling the job.
Our customers in South Pasadena keep our number because the work holds up. A sliding door installed near Boca Ciega Bay has to survive salt fog, afternoon thunderstorms, and hurricane-season wind loading, and it has to keep rolling smoothly after all of that. We install marine-grade stainless rollers, fusion-welded frames, and butyl flashing on every coastal job, because that’s what the conditions here demand. That’s not an upgrade line item. That’s the standard.
Dale Kessler founded this company on a single rule, and it still governs every install: if the pane is not true, the job is not done. The 90-Day Done Right Promise covers the workmanship, and under The Keystone Standard, we register both manufacturer warranty layers in writing before the truck leaves your driveway. Written down, durations stated, no arguing later. A live person answers the phone when you call, day or night. Not a voicemail tree. Not a callback form.
Our Sliding & Patio Doors Services in South Pasadena
Patio Sliding Doors
The standard two-panel patio slider is the most common door we replace in South Pasadena’s condo buildings. Owners want more light, better drainage, and a door that doesn’t take two hands to move. We install impact-rated Sliding & Patio Doors with stainless steel rollers and marine-grade thresholds sized to the existing opening or custom-fitted when the original rough opening doesn’t match any stock door. In a city where wind-driven rain hits exposed walls from both the bay and the Gulf, the flashing detail matters as much as the glass.

Panoramic Sliding Systems
For mid-rise condos and a few waterfront homes along Boca Ciega Bay, multi-panel panoramic systems replace an entire wall of fixed glass and a cramped slider with wide, stackable panels that open two-thirds of the view. In South Pasadena’s high-wind design zone, these systems require engineered headers, impact-rated laminated glass, and reinforced tracks. We quote what the opening actually needs. A panoramic replacement in South Pasadena typically starts around $6,500 and climbs with panel count and glass spec.

Heavy-Duty Sliding Doors
Older concrete-block buildings in South Pasadena were framed for lightweight single-pane aluminum sliders. When owners upgrade to heavier impact-rated doors, the weight shifts what the job requires. A heavy-duty slider with a fusion-welded frame and laminated glass can weigh triple what the original door weighed, which means reinforcing the header, shimming the track solid, and often doing block infill on an opening that was never plumb to begin with. We’ve pulled original doors near the bay whose bottom tracks had corroded to powder from forty years of salt exposure. The replacement hardware on every coastal job is 316 stainless. Anything less pits and seizes.

Pocket & Barn Doors
Interior pocket and barn doors are a different animal, but they come up in South Pasadena remodels where owners are reworking floor plans in older condo units. Pocket door frames in 1960s construction were often built with soft wood and light rollers, and by now most of them bind or sag. We replace pocket hardware with box-beam reinforced tracks and adjustable hangers, and we true the rough opening before the drywall goes back. You don’t want a pocket door that groans every time someone walks past it in a condo hallway.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Pasadena
We install and service sliding doors from PGT, CGI, and Simonton, among more than a dozen manufacturer lines we carry. Those three matter here because PGT and CGI build impact-rated products engineered for Florida’s high-velocity hurricane zones, and Simonton offers a solid mid-range vinyl option for budget-conscious condo associations. We keep common track, roller, and lock parts in stock for most manufacturer lines, so a service call to a South Pasadena condo doesn’t stall waiting on a shipment from the factory. When we quote, we put the manufacturer options side by side on paper so you see exactly what each line costs and what each warranty covers. No verbal pricing, no guesswork.
Common Sliding & Patio Doors Problems We See in South Pasadena Homes
- Salt-air pitting on aluminum tracks. South Pasadena’s position between Boca Ciega Bay and the Gulf exposes door hardware to corrosive salt from both sides. Tracks pit, rollers seize, and the door grinds to a halt. The fix is marine-grade hardware, not a heavier hand pushing the panel.
- Failed flashing on original 1960s-70s openings. The older buildings here had minimal waterproofing at door sills. Wind-driven rain gets under the threshold, rots the sub-sill, and stains the drywall below. We re-flash every opening with butyl tape before the new door goes in, because the old flashing is almost always gone or never there.
- Undersized rough openings. Original sliders in South Pasadena condos were framed for door dimensions that no stock replacement matches today. The concrete block has to be cut back or infilled, or the door gets custom-sized. Either way, it’s a thing that has to be priced and planned.
- Impact-code noncompliance. Every door replacement in Pinellas County’s high-wind zone triggers the Florida Building Code impact-glazing requirement. Single-pane sliders from the 1970s don’t come close. We pull the permit and install a door that passes inspection, because a passed inspection is part of the job, not an afterthought.
Pricing for Sliding & Patio Doors in South Pasadena, FL
A standard two-panel patio slider in South Pasadena runs $1,800 to $4,900 installed, depending on glass spec, frame material, and whether the opening needs block work. Impact-rated PGT or CGI doors add $900 to $2,200 over non-impact vinyl. Panoramic multi-panel systems start around $6,500. Heavy-duty coastal replacements with stainless hardware and re-flashing land in the $3,200 to $5,800 range. Screen door installation for a standard slider typically runs $180 to $420, and a full screen replacement on a panoramic system can exceed $900. Every quote is written line-item by line-item on paper before the job starts. No change orders unless we find hidden damage, and if we do, we price it and get your approval in writing before touching it. Call (813) 320-9346 to schedule a free estimate.
We Also Serve Cities Near South Pasadena
Our crews work across Pinellas County and the surrounding communities. We regularly serve South Pasadena neighbors in Acacia Villas, Alafaya, Altamonte Springs, and Altoona, along with the condo corridors running along the bay and Gulf shorelines. If you’re just outside the city line, call (813) 320-9346 and confirm your address and schedule. The same crew, the same pricing, the same written warranty registration.
Serving South Pasadena, FL - Our Local Coverage Area
We’re based in the South Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in South Pasadena
Salt air in South Pasadena attacks aluminum door tracks and rollers from both the Boca Ciega Bay side and the Gulf of Mexico side, causing pitting and seizure far faster than a few miles inland in St. Petersburg. Rollers corrode, tracks surface with rough oxidation, and the door grinds or jams within a few years unless the hardware is marine-grade 316 stainless or better. We use stainless rollers and corrosion-resistant tracks on every coastal replacement we do. Call (813) 320-9346 if your slider is getting harder to move, and we’ll tell you what’s failing.
Yes, many condo buildings in South Pasadena require all units to match a single approved door specification, which means the board needs to sign off on any product line before an owner can proceed. We handle that approval process directly: we bring the manufacturer spec sheets, impact-rating documentation, and warranty terms to the board meeting, and we stay on it until the paperwork clears. That’s a core part of working in a condo-heavy market like this one.
The concrete-block condo buildings in South Pasadena were poured around standard door dimensions from the 1960s and 70s, and those dimensions don’t match any stock door built today. The rough opening is usually too narrow or too short for modern impact-rated frames, so the opening either gets cut back, infilled with block, or the door gets custom-sized to fit. We measure twice, quote the true opening, and don’t pretend a stock door will drop in when it won’t.
Replacing a sliding door in South Pasadena triggers the Florida Building Code’s impact-glazing requirement for the high-wind design zone, which means the new door must be impact-rated or protected by an approved hurricane system. The opening must also be flashed and sealed to current code, which requires removing the old flashing and installing butyl tape or an equivalent at the sill and jambs. We pull the permit, schedule the inspection, and make sure the job passes before we’re done. A failed inspection is a callback, and callbacks are not how we work.
We inspect the opening before we quote, and if we find rotted sub-sill, corroded framing, or failed waterproofing once the old door is out, we stop, document the damage, price the repair on paper, and get your written approval before we do anything further. That’s the platform here. On a 1970s concrete-block condo near Boca Ciega Bay, our crew replaced an original aluminum slider whose screen track had turned to white powder and whose rollers had seized. We installed a custom-sized impact slider with a fusion-welded frame, stainless rollers, and a marine-grade threshold, then re-flashed the opening because the original waterproofing had failed and rain was staining the drywall below. The owner saw the photos, saw the line-item price, and approved it before the new door went in.
Get a Free Estimate for Sliding & Patio Doors in South Pasadena
If your slider sticks, leaks, fogs, or won’t lock, don’t wait until the next big storm to deal with it. Call TruePane Windows & Doors at (813) 320-9346 and we’ll send a technician to measure, inspect, and quote the job in writing. Free estimates, background-checked crews, both warranty layers registered before we leave. We’ve served South Pasadena long enough to know what these buildings need, and we’ll give it to you straight.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Pasadena and Pinellas County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After