Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Wedgefield
Window installation in Wedgefield is different from the work done in Orlando’s newer subdivisions. Most homes here are 1970s-1990s manufactured homes and rural ranch-style houses on large lots, many sitting near or inside FEMA flood zones within the St. Johns River basin. That means flanged windows engineered for thin-wall aluminum framing, flood-elevation compliance, and condensation control that standard residential installs simply do not address. TruePane Windows & Doors has been handling exactly this kind of work since 2008 across Florida, and our Window Installation team knows what a Wedgefield home needs before the first measurement is taken. Call (813) 320-9346 for a free estimate.
Why TruePane Windows & Doors Is Wedgefield’s Preferred Window Installation Company
We’re not a franchise outfit that sends a different subcontractor every season. Dale Kessler founded TruePane in 2008 on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That standard applies to every manufactured home retrofit and ranch-house replacement we do in Wedgefield. Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you’re paying for before signing anything.
When you call, a live person answers. Not a voicemail tree, not a callback form. 24 hours a day, seven days a week. That matters when you’re scheduling around a delivery, a storm, or a renovation timeline. And because we serve Wedgefield directly with local crews, we’re familiar with Taylor Creek Road, the equestrian properties off State Road 520, and the manufactured home communities where rough openings rarely match a big-box standard size. We plan to be in this community in thirty years, and we work like it.
Our Window Installation Services in Wedgefield
Casement Windows
Casement windows are the workhorse for Wedgefield manufactured homes that need wind-load compliance. The crank-out design seals against the frame with continuous compression, which holds up better than sliding sashes in the 130 mph wind zone that covers this part of Orange County. In Wedgefield, a typical impact-rated casement retrofit runs $700-$1,300 per opening, depending on the rough-opening condition and whether we need to reframe the aluminum channel. On a 1980s manufactured home off Taylor Creek Road, our crew replaced two sagging single-hung windows with impact-rated Simonton casements. The original units had fossilized vinyl and a broken sash. Inside the wall cavity, condensation had rotted the aluminum framing around the rough opening. We reframed to the manufacturer’s non-standard size, set the new flanged units with butyl flashing tape, and tied the nail-fin directly into the existing pier-anchored structure. That is the kind of window work Wedgefield demands, and it is the kind we do every week.

Sliding Windows
Sliding windows are common in older Wedgefield ranch homes, and they fail in predictable ways: sagging rollers, worn tracks, and seal failure from the persistent humidity this low-lying corridor holds. A typical sliding window replacement in Wedgefield runs $450-$900 per unit for a standard vinyl frame. If you need impact-rated sliders for flood-zone compliance, expect $850-$1,500. The key is fusion-welded corners. Cheap vinyl windows without them will sag and lose their seal within five years here, and we see it constantly.

Fixed & Picture Windows
Fixed and picture windows in Wedgefield homes often sit high on gable walls or in living rooms facing east toward the St. Johns River basin. Those eastern exposures catch the brunt of summer tropical moisture that funnels across this corridor. A fixed window replacement in Wedgefield typically runs $400-$1,000 for the unit, more if it needs impact glazing. We always check the weep holes and sill flashing on these because a picture window that traps water against the frame becomes a mold problem inside a manufactured-home wall cavity faster than you would believe.

Single & Double Hung
Single and double hung windows remain the most requested style in Wedgefield, largely because they match the look of the original 1970s and 1980s ranch homes. But the original units were not built for this climate. We replace them with modern vinyl or aluminum-clad units that carry a DP50 or higher design pressure rating. A standard double hung replacement in Wedgefield runs $500-$950 per window. Impact-rated versions start around $900 and go up from there. The difference is documented wind-load compliance, which matters when an adjuster reviews your claim after a storm.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wedgefield
We are an authorized installer for more than a dozen manufacturer lines, including Andersen, ES Windows, and PGT. That means warranty registration happens before our truck leaves your driveway, with both manufacturer warranty layers put in writing and durations stated. For Wedgefield customers who want a manufactured-home retrofit without major framing changes, ES Windows make flanged units that fit thin-wall aluminum framing well. If you prefer a premium wood-clad look on a ranch home, Andersen’s 400 Series is a solid option. We quote every line side by side on paper so you can compare. No surprises later.
Common Window Installation Problems We See in Wedgefield Homes
- Deep-jamb windows jammed into thin manufactured-home walls. A contractor installs standard residential windows with deep jambs into a 2×4 or 2×3 wall cavity, leaving gaps that break the wind-load rating and create condensation paths. In Wedgefield’s manufactured home stock, this is the single most common failure we correct.
- Seals set below base flood elevation. Orange County inspectors flag windows and doors whose bottom seals sit below the required flood elevation. If you skip this, an insurance adjuster will contest the claim after the next tropical system. We check the elevation on every Wedgefield job, especially on lots near the St. Johns River flood corridor.
- Sash sag and seal failure from humidity. Wedgefield’s position in the river basin keeps ambient humidity higher than in western Orange County. Low-quality vinyl windows with mechanically fastened corners will sag and fog within five years. Fusion-welded corners and proper weep-hole drainage prevent this.
- Improper flashing on pier foundations. Manufactured homes on pier foundations settle differently than slab-built houses. A window flashed tight to the frame on day one can shift within two years. We account for pier settling with flexible flashing and a wider tolerance on the rough opening.
Pricing for Window Installation in Wedgefield, FL
Window installation in Wedgefield runs between $400 and $1,500 per opening for most residential work. The spread depends on three things: whether the window needs impact glazing for wind-load compliance, whether we’re reframing a manufactured-home rough opening, and whether flood-zone elevation adjustments are required. On a typical 1980s manufactured home, a full retrofit of four or five windows runs $3,500-$6,500 with standard vinyl units, or $6,000-$11,000 with impact-rated frames. Ranch homes on slab foundations land on the lower end. We give written line-item quotes with no change orders. Call (813) 320-9346 and we’ll schedule a measurement. The estimate is free.
We Also Serve Cities Near Wedgefield
Our crews handle window installation across eastern Orange County. We serve Acacia Villas, Alafaya, Altamonte Springs, and Altoona, along with the surrounding unincorporated communities. If you’re in one of those areas and need the same manufactured-home expertise we bring to Wedgefield, call (813) 320-9346 and a live person will answer.
Serving Wedgefield, FL - Our Local Coverage Area
We’re based in the Wedgefield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Wedgefield
Replacement windows in a Wedgefield manufactured home must meet the Florida Building Code’s wind-load requirements for the 130 mph wind zone, which typically means a design pressure rating of DP50 or higher and Miami-Dade or FL product approval on the window assembly. Nearly all manufactured homes here require flanged or nail-fin windows engineered for thin-wall aluminum framing, not standard wood-frame replacements. Call (813) 320-9346 to have us check your existing openings and quote compliant units in writing.
If your lot is in an AE or X500 flood zone, Orange County’s floodplain management ordinance requires that window and door seals at or near base flood elevation include flood-vent and seal considerations. A compliant quote includes the elevation check and the documentation that proves it. A cheap quote skips both. We pull permits for every Wedgefield job and stand behind the inspection. Call (813) 320-9346 to schedule a free estimate that accounts for your parcel’s flood-zone status.
Impact-rated casement windows in a Wedgefield manufactured home average $850-$1,500 per opening installed, including the flanged frame, butyl flashing tape, and interior trim work. The wide range reflects the condition of the aluminum rough opening. If the framing has rotted from years of cavity condensation, plan for reframing, which adds $150-$300 per window. We measure twice, quote in writing, and do not change the number after work starts. Call (813) 320-9346 for an exact price on your home.
In most Wedgefield manufactured homes, Andersen and Pella standard units require significant framing modification because their jambs are too deep for thin-wall aluminum construction. That said, we can often install Andersen’s narrower profile or a flanged line from ES Windows or ViewLux with minimal reframing. We quote every option side by side so you can see the cost difference and make an informed decision. Call (813) 320-9346 to discuss your specific rough openings.
Choose vinyl windows with fusion-welded corners, maintain weep holes so drainage works, and make sure the installer uses a proper sill pan and flashing system rather than relying on caulk alone. In Wedgefield’s river-basin humidity, the single biggest factor in recurring seal failure is a window with mechanically fastened corners and no weep drainage. Every window we install includes both. Call (813) 320-9346 for a free measurement and we’ll show you the difference on paper.
Call TruePane for Window Installation in Wedgefield
We understand what Wedgefield’s manufactured homes, flood zones, and wind-load code actually require. We have been doing this work since 2008, and Dale Kessler’s standard still governs every install: if the pane is not true, the job is not done. You get a live person on the phone, a written line-item quote, and a 90-Day Done Right Promise on every window we set. Call (813) 320-9346 to schedule your free estimate. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wedgefield and eastern Orange County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After