Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Boynton Beach
Window replacement in Boynton Beach has to meet a higher bar than most of South Florida. Palm Beach County’s adopted ASCE 7 wind maps put coastal Boynton Beach at a 170 mph design wind speed, which means Florida Product Approval impact-rated glazing is effectively required on any permitted replacement project. Our Window Replacement crews work in Boynton Beach every week, and we know what the building department here asks for before they’ll sign off. If you’re weighing replacement windows for a CBS home near Woolbright Road or a condo unit in Leisureville, call (813) 320-9346 and we’ll walk you through what your opening actually requires.
Why TruePane Windows & Doors Is Boynton Beach’s Preferred Window Replacement Company
TruePane has been working in Boynton Beach’s 55+ communities and east-side CBS neighborhoods long enough to know that most homes here share the same handful of window problems. The original aluminum sliders in Century Village and Leisureville were sized for frames that no manufacturer has made in decades. The salt air off the Intracoastal oxidizes hardware faster here than it does ten miles west. And the HOA approval process for condo window replacement is its own separate job, one that sinks projects when a contractor doesn’t know how to package it.
We’re led by Dale Kessler, who founded TruePane in 2008 on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed, and they measure every opening twice before ordering. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every job we do in Boynton Beach, from a single insert replacement to a full phase of condos.
Our Window Replacement Services in Boynton Beach
Full Frame Replacement
Full frame replacement means we remove the entire existing window down to the rough opening and set a new, properly flashed unit. In Boynton Beach, this is often the only path on 1960s and 70s CBS homes where the original aluminum frames have corroded or the rough opening has drifted out of square. A full frame replacement in Boynton Beach typically runs $950-$1,850 per opening for impact-rated product with standard finishes, installed. We rebuild the buck when it’s needed, flash it to Palm Beach County code, and pull the permit for your job.
Insert Window Replacement
Inserts, sometimes called pocket replacements, fit a new window inside the existing frame. They’re faster and less invasive, and they make sense when the original frame is still square and the surrounding stucco is in good shape. For Boynton Beach condo owners in Century Village or Leisureville, inserts are often the only option an HOA will approve, because they don’t change the exterior appearance of the building. Insert replacement in Boynton Beach generally runs $650-$1,200 per opening for impact-rated product.
Storm Window Replacement
What Boynton Beach calls storm windows, the building code calls wind-borne debris protection. If your current setup is a single-pane aluminum slider with a removable shutter panel, you’re not compliant with current Palm Beach County requirements for any permitted replacement. We replace those systems with permanently installed, Florida Product Approved impact-rated windows. That means no shutters to hang before a storm, no plywood to cut, and a window that does the protecting itself. Storm window replacement on a standard Boynton Beach single-family home typically runs $850-$1,600 per opening depending on size and product line.
Energy-Efficient Upgrade
Boynton Beach’s coastal humidity makes Low-E coatings and argon-filled dual panes more than a comfort feature. They cut the condensation that forms on single-pane aluminum frames every summer morning and they lower the load on your air handler. For Boynton Beach homeowners who plan to stay in the house another fifteen or twenty years, an energy-efficient upgrade pays back faster than it does inland because the humidity drives your AC harder. Expect to add $100-$250 per opening over base impact-rated product for Low-E and argon on a typical replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boynton Beach
TruePane is an authorized installer for Window Replacement product lines from Andersen, Pella, Marvin, PGT, CGI, and others. For Boynton Beach’s coastal exposure, we regularly quote ViewLux impact-rated casement and fixed units alongside Marvin and Pella, side by side on paper so you can see what each line actually costs. We stock common hardware and sealants for the aluminum frames most common in Century Village and Leisureville, which shortens turnaround when a phase-wide project needs matching components. Every quote lists the manufacturer, the model, the glass package, and both warranty durations before you sign anything.
Common Window Replacement Problems We See in Boynton Beach Homes
- Salt-air corrosion on original aluminum frames. Homes east of Congress Avenue sit close enough to the Atlantic and the Intracoastal that airborne salt oxidizes aluminum frames and hardware measurably faster than homes ten miles inland. We regularly see multi-point locks on impact sliders frozen solid by corrosion within a decade of installation.
- Out-of-square rough openings in 1960s CBS construction. Concrete block settlement and decades of thermal movement leave original openings drifted by a quarter inch or more. Standard-sized double-hungs ordered from a catalog won’t fit without field grinding and infill, which is why we field-measure every opening before ordering.
- Non-compliant jalousie and single-pane sliders in 55+ communities. Century Village and Leisureville still contain thousands of units with original jalousie windows that offer no wind-borne debris protection and no meaningful energy performance. Any permitted replacement must be Florida Product Approved, which means HOA board approval and unit-phase coordination.
- Corroded hollow-metal door frames on CBS homes. East-side CBS homes from the same era often retain original hollow-metal door frames that rust from the inside out in coastal air. Reusing a corroded buck on a window or door replacement fails within a year, so we recommend full buck replacement on these jobs.
Pricing for Window Replacement in Boynton Beach, FL
Window replacement in Boynton Beach runs higher than inland because the coastal wind load requires Florida Product Approval product, and because so much of the housing stock needs field-measured custom orders. For a typical CBS single-family home, expect:
- Insert impact-rated replacement: $650-$1,200 per opening
- Full frame impact-rated replacement: $950-$1,850 per opening
- Full frame with Low-E and argon upgrade: $1,100-$2,100 per opening
- Condo unit in a 55+ community (COA/HOA coordination included): $700-$1,400 per opening depending on the phase specs
What changes the price: opening size, product line (Pella, and Marvin sit at different price points), whether the existing buck can be salvaged, and whether your HOA requires a specific exterior finish. We quote line items on paper, no change orders, and every estimate is free. Call (813) 320-9346 and we’ll measure your openings and hand you a written quote.
Permits, Code, and Insurance in Boynton Beach
Here’s what a compliant Boynton Beach window replacement includes that a cheap quote leaves out. First, the permit. Palm Beach County requires a building permit for any replacement window that changes the size of the opening or involves structural work, and most condo associations in Boynton Beach require permits even for insert replacements. Second, the product itself must carry a Florida Product Approval number and meet the ASCE 7 wind load for coastal Boynton Beach, which is 170 mph. Third, the installation must be inspected, and the inspector looks at flashing, anchoring, and the product approval label on the glass.
A compliant quote includes the permit fee, the HOA or COA coordination time, the field measurement, and the product approval documentation. A cheap quote often skips all of it, and then the homeowner finds out at final inspection, or worse, during a claim. If a hurricane forces glazing failure and an insurer asks for documentation that the replacement was permitted and code-compliant, having both warranty layers and the permit record in writing is the difference between a paid claim and a denied one. That’s why The Keystone Standard registers both warranty layers in writing before our truck leaves the driveway.
At a Century Village condo cluster on Southwest 8th Avenue, our crew field-measured original 1960s aluminum sliders that were 1/4-inch out of square from decades of salt-air corrosion on the jamb. We installed custom ViewLux impact-rated casement windows with fusion-welded frames and flashing tape around the buck, then pulled a single phase-wide permit covering 112 identical units for the HOA. That’s how window replacement works in Boynton Beach when the contractor knows the buildings and the board.
We Also Serve Cities Near Boynton Beach
Our Boynton Beach crews also cover Delray Beach, Greenacres, Boca Raton, and West Palm Beach. If you live just outside Boynton Beach and need window replacement, call the same number and we’ll schedule a measurement visit. Call (813) 320-9346 for a free estimate anywhere in the Boynton Beach service area.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Boynton Beach
Replacement windows in coastal Boynton Beach must meet an ASCE 7 design wind speed of 170 mph, which in practice means Florida Product Approval impact-rated glazing. The specific design pressure rating depends on your home’s location relative to the coast and the size of the opening, but any permitted replacement east of Congress Avenue should assume a high-velocity hurricane zone rating. Call (813) 320-9346 and we’ll check your property’s specific exposure category and quote compliant product.
No. Century Village and Leisureville unit owners must get approval from their condo association before replacing windows, because the exterior of the building is a common element in most governing documents. The HOA typically requires a specific product type and exterior finish to maintain uniformity, and many boards process window replacement as a phase-wide project rather than unit-by-unit. TruePane has worked with Century Village and Leisureville boards directly and can help you package your request. Call (813) 320-9346 and we’ll help you navigate the approval.
Jalousie windows fail in Boynton Beach because their glass louvers sit in open aluminum channels that salt air corrodes rapidly, and they offer no seal against wind-driven rain or wind-borne debris. The hardware binds, the glass rattles, and the window provides zero hurricane protection and almost no energy performance. They are universally non-compliant with Palm Beach County’s current wind-borne debris requirements, and any permitted replacement means a full frame change to an impact-rated product.
Yes. If you replace windows with Florida Product Approved impact-rated product, and the job is permitted and inspected, you have documentation that materially supports a wind damage claim. Insurers ask for proof that the glazing was compliant at the time of the loss. Both warranty layers registered in writing, plus the permit record, is the strongest documentation a homeowner can hold. That’s what The Keystone Standard provides on every TruePane job in Boynton Beach.
CBS homes east of Congress Avenue in Boynton Beach typically have concrete block walls with masonry rough openings sized for long-discontinued aluminum window dimensions, and the original hollow-metal door frames frequently corrode from the inside out in the salt air. Field-measured custom orders and occasional sill grinding or infill are the norm, not the exception, on these retrofit jobs. We measure every opening twice and quote the custom order accordingly, so you’re not paying for a stock window that doesn’t fit. Call (813) 320-9346 for a free measurement and written quote.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boynton Beach and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.