Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Pinewood
Window replacement in Pinewood runs on a simple rule: every opening, even a single bedroom unit, must carry a Miami-Dade Notice of Acceptance before the permit clears. We’ve worked that rule on hundreds of Pinewood homes, most of them post-WWII concrete block and stucco builds from the 1950s and 1960s still wearing their original jalousie or single-pane aluminum frames. Our crews know the rough opening sizes on these houses, know the NOA lookup system cold, and pull the certification for every unit before we quote. Call (813) 320-9346 and we’ll walk your openings with you, on paper, before a single window gets ordered.
Why TruePane Windows & Doors Is Pinewood’s Preferred Window Replacement Company
We’ve replaced windows in Pinewood long enough to know what’s behind the stucco: lintels set to non-standard jamb widths, original mullion spacing that no off-the-shelf unit matches, and the humidity that tests every seal within the first summer. Dale Kessler founded TruePane in 2008 on a simple rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That rule governs every opening we set in this neighborhood.
Pinewood homeowners keep our number because the details get handled before they become a problem. Both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves the driveway. That’s The Keystone Standard, and it’s not a brochure line. It’s what we do on every job from a single insert replacement on NW 77th Street to a full-frame impact conversion on a corner lot near the 33147 zip. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a regional call center. You call, we answer.
Our Window Replacement Services in Pinewood
Full Frame Replacement
Full frame replacement in Pinewood means tearing out the original aluminum or jalousie frame down to the concrete block and rebuilding the opening to current Miami-Dade HVHZ specs. Most of these openings measure to fractions not found in any distributor catalog, so we frame each jamb to spec, install flashing tape at the sill, and order the NOA-certified unit to the measured opening. This is the right call when the original frame is corroded, the lintel has shifted, or you want to move from a jalousie to a sealed impact casement.
Insert Window Replacement
Insert replacement fits a new NOA-certified unit inside the existing frame, where the frame itself is still square and sound. In Pinewood, that’s less common than you’d think: sixty years of humidity and salt air have done their work on most of these frames. We measure twice, check the frame for hidden corrosion, and tell you straight if an insert will hold or if the frame needs to come out. If the frame stays, you save on labor and keep the job moving while the custom glass is in production.
Energy-Efficient Upgrade
Pinewood’s flat, low-lying terrain catches the full weight of South Florida’s UV and humidity. A central-Florida U-factor spec won’t hold up the way it should here, and we see seal failures within the first year when somebody specs glass that way. We specify low-E coatings and argon fill to South Florida conditions, not to a national average, and we put the performance numbers in writing before you commit. On a 1950s CBS home, the jump from single-pane aluminum to a properly specced insulated unit changes both the electric bill and the comfort in the room by a margin you can feel.
Storm Window Replacement
Storm window replacement in Pinewood has a specific meaning: NOA-certified impact glazing rated for Miami-Dade’s wind-load requirements. We don’t sell a secondary surface-mounted storm panel as a substitute for a code-compliant impact unit, and we won’t install one where the permit requires an NOA. If you’re in the HVHZ, which every Pinewood address is, the storm window we set is the same one that passes the wind-missile test and clears final inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinewood
TruePane is an authorized installer for more than a dozen manufacturer lines, including. When we quote a replacement for a Pinewood home, we put the manufacturer lines side by side on paper so you see exactly what you’re buying, line by line. For impact work on CBS construction, PGT and CGI units are common choices in this neighborhood, and we work with both regularly. We carry glazing, hardware, and seal components for the brands Pinewood homes already have, which keeps the callbacks fast when a sash or latch goes bad.
Common Window Replacement Problems We See in Pinewood Homes
Sixty years of South Florida weather leaves a pattern on these houses. Here’s what we find when we walk a Pinewood opening:
- Original jalousie panels that can’t clear the NOA gate. The glass-louvered units common in 1950s and 1960s Miami-Dade construction cannot achieve an NOA wind-load rating, so they can’t be retained in a permitted renovation. A contractor who doesn’t know that will stall the permit at final inspection.
- Corroded aluminum frames on the windward side. Salt air and humidity eat early aluminum extrusions from the inside out. We’ve pulled frames that looked fine from the street and crumbled at the corner welds once the stucco came off.
- Off-the-shelf units ordered without the NOA lookup. Rough openings on Pinewood CBS homes are consistently non-standard. A distributor stock unit that misses the NOA match or the jamb width leaves the homeowner with a failed inspection and a unit that can’t be returned.
- Seal failure from a wrong-climate spec. An insulated glass unit specced for central Florida’s U-factor won’t survive Pinewood’s humidity and UV. The seal goes soft, the glass fogs, and the warranty claim becomes a fight. We spec the glass for this climate, and we register both warranty layers in writing.
Pricing for Window Replacement in Pinewood, FL
Pinewood pricing follows the NOA requirement. A basic single insert replacement with a NOA-certified impact unit typically runs $1,400 to $2,100 per opening, depending on size and the existing frame condition. A full frame replacement on a 1950s CBS home runs $2,400 to $3,800 per opening, with custom sizing adding to the order. Energy-efficient upgrades with low-E and argon fill add roughly $300 to $600 per unit over a standard insulated glass package. Storm window replacement with impact glazing lands between $1,800 and $3,200 per unit, driven by the wind-load certification and the hardware. The price we quote is the price you pay: fixed in writing before we order, no change orders at final inspection. Call (813) 320-9346 for a free, line-by-line estimate on your Pinewood home.
We Also Serve Cities Near Pinewood
TruePane crews serve homeowners across the Miami-Dade area, so if you’re in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, the same Pinewood NOA and impact-certification standards apply to your openings. Every one of those communities sits under the same HVHZ rule set, and we work those permits daily. If you’re just over the line from Pinewood, call us and we’ll let you know which certification gate applies to your address.
Serving Pinewood, FL - Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Pinewood
Pinewood sits entirely inside Miami-Dade County’s High Velocity Hurricane Zone, which requires a Notice of Acceptance on every window and door replacement, no matter the size of the job. A mile north into Broward County, that certification gate doesn’t exist in the same form. In Pinewood, the NOA is not optional on any permitted opening, and it’s the first thing we check when we walk your house.
The short answer is we order the units first and keep the framer moving while the glass is in production. We measure and pull the NOA lookup before we quote, then frame the jamb and flashing to spec so the rough opening is ready when the unit arrives. That way the permit doesn’t sit waiting on a distributor ETA. Call (813) 320-9346 and we’ll walk you through the timeline for your specific openings.
In most Pinewood homes we walk, the answer is no. Sixty years of humidity and salt air usually leaves the original extrusion with hidden corrosion at the corners and sill, and a failing frame doesn’t belong behind a new NOA-certified unit. If the frame is still square and sound, an insert is viable, but we’ll tell you honestly after we measure whether that’s the case on your openings.
Lead time drives the calendar. Custom NOA-certified impact units, especially the high-performance glass packages we spec for Pinewood’s humidity and UV, run weeks out from most manufacturers. The on-site labor is usually a day or two per opening. We’re candid about that from the first walkthrough: the schedule is set by the glass, not by our crew. If you want a straight answer on current lead times for the manufacturer lines we quote, call (813) 320-9346.
Look for a U-factor at or below 0.30 and a Solar Heat Gain Coefficient between 0.20 and 0.25 for Pinewood’s climate. Those numbers hold up to South Florida humidity and UV the way a central-Florida spec won’t. We put the performance figures in writing on every quote, so you can compare one line against another before you spend a dollar.
Contact TruePane for Window Replacement in Pinewood
If you own a home in Pinewood and your windows are original to the house, you already know what the summers feel like. We’ll walk your openings, pull the NOA lookup on each one, and give you a fixed price in writing before you decide anything. No pressure, no fine print, no surprise line items. Call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinewood and the surrounding Miami-Dade communities with NOA-certified window and door replacements.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.