Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Sweetwater
Window replacement in Sweetwater, FL means one thing before anything else: the window has to carry a Miami-Dade County Notice of Acceptance. Not just a Florida Product Approval. County inspectors here reject FL#-only windows every week, and homeowners end up paying twice. TruePane has been installing NOA-compliant windows in Sweetwater long enough to know the difference saves you weeks of delay and a re-order. Call (813) 320-9346 for a free estimate, and we’ll walk you through exactly what your permit will require before we quote a single number.
Why TruePane Windows & Doors Is Sweetwater’s Preferred Window Replacement Company
Most of the homes we open up in Sweetwater were built between the late 1970s and early 1990s. That means concrete block and stucco, and that means original jalousie windows or thin single-pane aluminum sliders that have been fighting Everglades humidity for forty years. We know what’s behind those walls before we take the first screw out, because we’ve done this work in Sweetwater block after block. Our crews are background-checked, uniformed, and local. Dale Kessler founded TruePane in 2008 on a simple rule that still governs every install: if the pane is not true, the job is not done. Sweetwater homeowners have called us for everything from a single fogged window to a full-house impact retrofit, and they get the same answer every time: a square deal, written out, no surprises on the bill.
There’s no voicemail tree here. A live person answers the phone 24 hours a day, 7 days a week. When you call about a window that’s leaking into your living room during a wet-season downpour, you don’t want a callback form. You want a person. That’s what we’ve done since day one.
Our Window Replacement Services in Sweetwater
Full Frame Replacement
A full frame replacement means we pull the entire old window out down to the rough opening, inspect the framing, repair or rebuild what’s rotted, and set the new window into a properly flashed and sealed opening. In Sweetwater, where original 1970s jalousie windows often hide water-damaged framing behind the stucco, this is the most common route we recommend. It is also the only route that truly fixes the problem instead of covering it up. Most full frame replacements in Sweetwater run $900 to $2,400 per opening, depending on size and framing condition.
Insert Window Replacement
If the existing frame is still square and solid, an insert replacement can go in without tearing out the old frame. This works well on Sweetwater’s CBS homes where the original aluminum frame is intact but the glass unit has failed or the weatherstripping is shot. Inserts are faster, less disruptive, and run $600 to $1,500 per window in Sweetwater. But we’ll tell you straight: if the frame has corrosion or the flashing has failed, an insert won’t solve it. We measure twice and tell you which option actually fits your house. Our Window Replacement team handles both approaches, and we’ll put the recommendation in writing before you spend a dollar.
Storm Window Replacement
Storm windows are a secondary layer installed over existing windows to add impact protection and energy efficiency without a full replacement. For Sweetwater homeowners in older apartment buildings or condos where the association limits full-frame work, this is often the practical path. A good storm window, properly fitted with NOA-compliant hardware, runs $350 to $800 per unit in Sweetwater. We’ll check your building’s requirements before we quote, because some Sweetwater associations have their own approval process on top of the county permit.
Energy-Efficient Upgrade
An energy-efficient upgrade in Sweetwater means replacing failed insulated glass units or thin single panes with low-E, argon-filled glass rated for our climate. Given that Sweetwater sits at the eastern edge of the Everglades, humidity is the thing that kills window seals here faster than anywhere else in Miami-Dade. We see failed argon units fogging between the panes on windows that are only eight or ten years old. Replacing those units runs $400 to $1,000 per window in Sweetwater, depending on glass size and coating. The electric bill savings are real, but the bigger win is finally having windows that don’t sweat in August.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sweetwater
We are an authorized installer for more than a dozen manufacturer lines, and we stock parts locally for Sweetwater customers so you aren’t waiting on a shipment from out of state. We regularly quote Andersen, ES Windows side by side on paper so you can see exactly what each line costs and what the warranty covers. If your home already has a brand you trust, we service it. If you want to see three options lined up next to each other with real numbers, we’ll do that too. That’s a square deal, and we’ve been doing it that way since 2008 of combined glazier experience.
Common Window Replacement Problems We See in Sweetwater Homes
- NOA-vs-FL permit rejections: Out-of-county contractors quote Sweetwater jobs with Florida Product Approval windows that lack the Miami-Dade NOA stamp. The permit gets rejected, the homeowner waits weeks for a re-order, and the cost climbs. We verify NOA compliance before we ever submit a quote, because we have watched this trap spring too many times on Sweetwater homeowners.
- Rotted rough-opening framing behind old jalousies: Original jalousie windows from the 1970s and 1980s let decades of Everglades humidity seep into the rough opening. By the time we pull the frame, the wood behind the stucco is often soft or gone. If you skip this repair and just set a new window, it fails watertightness during the first wet-season downpour. We rebuild the opening with pressure-treated bucks and flashing tape before the new window goes in.
- Failed argon-filled insulated glass units: Fog between the panes is not condensation you can wipe off. It’s seal failure, and it means the argon has leaked out and the window has lost most of its insulation value. In Sweetwater’s humidity, this shows up on relatively young windows. The fix is replacing the glass unit, not the whole frame, and it runs far less than most homeowners expect.
- Corroded aluminum frames and failed weatherstripping: Salt air off the Atlantic and year-round humidity accelerate aluminum frame oxidation in Sweetwater. Weatherstripping crumbles, frames warp, and the window starts to leak air even when it’s closed. On homes near the Dolphin Expressway, the constant vibration from traffic makes it worse. We see this on nearly every 1980s home we open up.
Pricing for Window Replacement in Sweetwater, FL
Window replacement pricing in Sweetwater follows a clear pattern, and we write every quote with a line item for each opening. A basic insert replacement on a single window runs $600 to $1,500. A full frame replacement with impact-rated glass runs $900 to $2,400 per opening. An energy-efficient glass unit swap runs $400 to $1,000. A complete house of six to eight impact windows on a typical Sweetwater CBS home lands between $8,000 and $18,000, depending on opening sizes, framing condition, and glass package. The biggest cost variable in Sweetwater is framing repair: when we find rotted rough openings behind old jalousies, that work adds $200 to $600 per opening and cannot be skipped. We give fixed pricing with no change orders, and every quote includes the NOA verification in writing before you commit. Call (813) 320-9346 to schedule your free estimate.
We Also Serve Cities Near Sweetwater
Our crews work throughout Sweetwater and the surrounding communities. If you’re in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, the same NOA-compliant process and the same Done Right Promise apply. Here’s more about Window Replacement in Sweetwater and how we approach permit-ready installs across western Miami-Dade. Call (813) 320-9346 and a live person will answer.
Serving Sweetwater, FL - Our Local Coverage Area
We’re based in the Sweetwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sweetwater
Sweetwater is inside Miami-Dade County’s High Velocity Hurricane Zone, and the county requires every replacement window and door to carry a Miami-Dade County Notice of Acceptance (NOA), which is a stricter product-approval standard than the statewide Florida Product Approval (FL#). A window can be perfectly code-compliant everywhere else in Florida and still get rejected at the Sweetwater permit counter if it lacks the NOA stamp. Contractors who bring FL#-only products into Sweetwater get stopped at inspection and the homeowner eats the re-order cost. We verify NOA compliance before quoting, so your permit goes through on the first submission. Call (813) 320-9346 for a permit-ready quote.
In most Sweetwater homes, yes, you can replace original jalousie windows with impact-rated casement windows without reframing the entire opening, but you should expect the rough opening itself to need work. Jalousie windows were set into small, narrow openings, and the framing around them is often water-damaged after forty years of Everglades humidity. We can widen the opening where needed, rebuild the rough framing, and set an impact-rated casement that carries both NOA and FL# approvals. When we did this on a 1980s CBS home near the Dolphin Expressway, the original aluminum frames were so corroded the jalousie cranks had seized. We rebuilt the openings with pressure-treated bucks and flashing tape, set NOA-compliant casements, and the permit inspection passed on the first visit. Expect framing repair to add $200 to $600 per opening. Call (813) 320-9346 and we’ll measure your openings for free.
If you see fog or haze between the two panes of glass that you cannot wipe off from either side, the insulated glass unit has failed. The seal around the perimeter broke, the argon gas escaped, and the window has lost most of its insulation value. In Sweetwater’s humidity, this shows up early and often. You do not need a full window replacement; you need a glass unit swap, which runs $400 to $1,000 per window depending on size and coating. We replace the unit, not the whole frame, and the fix is done in a single visit. Call (813) 320-9346 for an exact quote.
Sweetwater building inspectors enforce Miami-Dade HVHZ code, which means any opening we touch must be brought up to current impact and watertightness standards. If we open a wall and find rotted framing, the inspector will require it be replaced with pressure-treated lumber and properly flashed before the new window goes in. If the existing opening was never flashed correctly, the inspector will require flashing tape or a pan flashing at the sill. If the old window was non-impact, the replacement must be NOA-compliant impact-rated. We price all of this into the quote up front, with a written allowance for any hidden framing work, so the permit inspection passes without a redo. Call (813) 320-9346 to get a written quote that accounts for all of it.
Yes, but the size of the savings depends on what you’re replacing. Swapping out original single-pane aluminum sliders for NOA-compliant, low-E, argon-filled windows cuts heat gain through the glass by roughly half, which on a typical Sweetwater home shaves 10 to 20 percent off the cooling portion of the electric bill. The bigger benefit in Sweetwater is humidity control: a properly sealed window stops the moisture that makes the air conditioner work harder. Expect an energy-efficient glass unit swap to run $400 to $1,000 per window, with the full window replacement running $900 to $2,400 per opening. Call (813) 320-9346 and we’ll show you the numbers on paper, side by side, with no pressure.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.