Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSalt Air Decides Your Door Hardware in Pinellas Park Before You Even Pick a Style
If you live in Pinellas Park, the air itself is working against your doors. The peninsula sits between Tampa Bay and the Gulf, and that salt-laden air corrodes standard steel hinges, handles, and thresholds faster than most homeowners expect. We regularly see door hardware in Pinellas Park pitted and binding within five to seven years when it was specified for inland conditions. The answer is not a thicker coat of paint. It is stainless steel or hot-dip galvanized hardware, marine-grade flashing, and sealed joints from the first day. A door installation in Pinellas Park should start with the question of what survives here, not just what looks right. Call us at (813) 320-9346 and we will walk you through what actually holds up.
Fast, Reliable Door Installation Across Pinellas Park
TruePane Windows & Doors installs entry doors, storm doors, French doors, bifolds, and custom arched doors across Pinellas Park, from the neighborhoods off 66th Street to the manufactured home communities along Park Boulevard. We know the housing stock here because we work in it every week. That means we know which Pinellas Park homes have original jalousie panels, which manufactured units need HUD-compliant sizing, and which concrete block homes from the 1960s still carry the doors they were built with. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before our truck leaves your driveway. For a free estimate on your Door Installation, call (813) 320-9346.
Key Takeaways
- Pinellas Park door jobs often require HUD-compliant manufactured home sizing or coastal-spec hardware that generic installers overlook.
- Salt air from Tampa Bay and the Gulf corrodes standard steel door hardware within five to seven years here.
- A typical entry door installation in Pinellas Park runs $900-$2,400 for a standard site-built home; manufactured home doors with special-order sizing run $1,200-$3,200.
- Impact-rated or product-approved doors are effectively mandatory under Pinellas County’s 130 mph wind code.
- Every TruePane job carries the 90-Day Done Right Promise and The Keystone Standard, with both warranty layers registered in writing.
Why TruePane Windows & Doors Is Pinellas Park’s Preferred Door Installation Company
We have spent years in Florida’s window and door trade, and the work we do in Pinellas Park is shaped by what we see here. Dale Kessler founded this company in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That applies to every door jamb, threshold, and hinge we set.
Pinellas Park homeowners tend to stay in their homes for decades. They remember the contractor who left them with a door that binds in July and a warranty that evaporated. We are not that company. Our technicians are background-checked and uniformed. They work in your home the way they would work in their own mother’s. And when you call us, a live person answers, 24 hours a day, seven days a week. Not a voicemail tree.
The real difference in Pinellas Park is that we understand the manufactured home stock that dominates this city. Roughly one of the highest concentrations of 55-plus and manufactured home communities in Pinellas County sits right here. That changes the permitting pathway, the supplier list, and the installation method. We plan for it before we quote it. Dispatch and scheduling for our Pinellas Park crews are coordinated from our South Florida office, but the technicians on your doorstep are local and know this city’s housing stock.
Our Door Installation Services in Pinellas Park
Entry & Swing Doors
Entry door replacement in Pinellas Park often means working with 1950s and 1960s concrete block homes where the original door frame and the block were set together. Those jambs have shifted over decades, and the salt air has eaten at the hardware. We replace the full unit, not just the slab, and we flash the jamb with marine-grade tape before the trim goes on. For manufactured homes, the rough opening is frequently a 30-inch-wide spec that big-box stores do not stock. We special-order HUD-compliant units that fit the opening without filler strips.
Storm Doors
Storm doors in Pinellas Park serve two purposes: they protect the primary entry door from driven rain and salt mist, and they give older homes an extra layer of cross-ventilation. The catch is that a cheap storm door with inland-spec hardware will corrode at the hinges and latch within a few years here. We specify storm doors with stainless steel or hot-dip hardware and sealed frame joints, sized to whatever the existing jamb will actually accept, including manufactured home openings.
Arched & Custom Doors
Pinellas Park has a surprising number of mid-century homes with arched entryways, and replacing those doors without butchering the opening takes a fabricator who understands radius work. We order custom arched doors through our manufacturer lines, match the radius to the opening, and set the frame with the same coastal-spec hardware we use everywhere else in this city. Custom work takes longer than a standard slab swap, but the alternative is a squared-off patch job that cheapens the whole front elevation.
Bifold & Folding Doors
Bifold and folding doors show up in Pinellas Park mostly as patio transitions and room dividers in the larger 1970s ranches. The failure point here is almost always the track and the roller hardware, which pit in salt air and then bind. We replace tracks with corrosion-resistant materials and set the doors so they travel cleanly in both directions. If the opening is out of square, and in a 50-year-old Pinellas Park home it usually is, we correct the header before we hang the panels.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinellas Park
We are an authorized installer for more than a dozen manufacturer lines, and for Pinellas Park work we lean heavily on PGT, CGI, and Simonton when impact rating and coastal hardware matter. Those manufacturers build products tested for Florida wind loads, and their warranty layers are worth having in writing. We quote manufacturer lines side by side on paper so you can see exactly what you are buying and what each one costs. No mystery substitutions, no “equivalent” products that are not equivalent. If a brand you already trust is not in our list, ask us. We likely have the line and can service it under the same Done Right standard.
Common Door Installation Problems We See in Pinellas Park Homes
- Corroded hardware on doors only five to seven years old. Salt-laden air off Tampa Bay and the Gulf pits standard steel hinges, handles, and thresholds. The door still looks fine from across the room, but the latch fails and the hinges bind. We specify stainless or hot-dip hardware on every exterior door in Pinellas Park.
- Site-built doors forced into manufactured home openings. A standard 32-inch or 36-inch entry door does not fit a 30-inch HUD-code rough opening. Installers who force it add weak filler strips or split the jamb. We see this regularly in the 55-plus parks off Park Boulevard. The correct fix is a special-ordered HUD-compliant unit.
- Original jalousie doors failing current wind code. Many 1950s-1970s Pinellas Park homes still have jalousie or non-impact-rated doors. Under Pinellas County’s 130 mph design wind requirement, those doors do not meet code for a permitted replacement. An unpermitted cheap swap leaves the homeowner exposed on an insurance claim.
- Thresholds and sill pans rotted from trapped moisture. In a humid, salt-air climate, a poorly flashed sill pan rots from the inside. By the time you see the water stain on the interior floor, the subfloor damage is already done. We pull the door, inspect the sill, and rebuild the pan with marine-grade materials before the new unit goes in.
Pricing for Door Installation in Pinellas Park, FL
A standard entry door replacement on a site-built Pinellas Park home typically runs $900 to $2,400, including the door, hardware, and labor, depending on whether the unit is impact-rated and what material you choose. A HUD-compliant door for a manufactured home runs $1,200 to $3,200 because the unit is special-ordered to match the rough opening and the permitting path is different. Storm doors in Pinellas Park run $400 to $1,100 installed. Custom arched or pivot doors start around $2,500 and go up from there based on radius work, finish, and hardware. The gap between a coastal-spec door and an inland-spec door is roughly $300 to $700 on a typical entry unit. The inland-spec door costs more within a decade because you will replace the hardware twice and possibly the whole frame. Call (813) 320-9346 for a free estimate with exact numbers in writing. We do not change the price once the job starts.
We Also Serve Cities Near Pinellas Park
TruePane handles door installation across Pinellas Park and the surrounding Pinellas County communities, including Dunedin, Largo, Seminole, and Bay Pines. If you are a few minutes outside the Pinellas Park city line, the same crew and the same coastal-spec standards apply. Call (813) 320-9346 and tell us the neighborhood; we will schedule the measure.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pinellas Park
Because Pinellas Park has one of the highest concentrations of manufactured home and 55-plus communities in Pinellas County, and those units have rough openings built to HUD-code specs, often 30 inches wide. Standard 32-inch or 36-inch residential doors do not fit those openings without filler strips or forced jambs, which crack over time and compromise the wind-load rating. We special-order HUD-compliant units that match the opening exactly. Call (813) 320-9346 and we will tell you what your opening actually measures and what it will take to fill it correctly.
Salt-laden air settles on steel door hinges, handles, and thresholds, and the chloride starts oxidizing the metal. Within five to seven years, hinges pit and bind, handles corrode, and thresholds crumble at the fasteners. We specify stainless steel or hot-dip galvanized hardware on every exterior door in Pinellas Park, and we flash the jamb with marine-grade tape so the seal holds against driven salt mist. The materials cost more upfront; the alternative is replacing hardware twice in a decade. Call (813) 320-9346 for a quote that includes the correct hardware the first time.
A coastal-spec door with stainless or hot-dip hardware, marine-grade flashing, and impact rating runs roughly $300 to $700 more than the same door with inland-spec components. The cheap spec costs more over ten years because you will replace corroded hardware twice, repair a rotted sill pan, and likely need a new frame when the jamb splits. We have pulled enough failed inland-spec doors out of Pinellas Park homes to know this is not hypothetical. The Keystone Standard means we register both warranty layers in writing before we leave the driveway. Call (813) 320-9346 for an exact number on your door.
Many 1950s-1970s Pinellas Park homes were built with jalousie panels in the door assemblies, and those louvered glass panels were never impact-rated. Under Pinellas County’s 130 mph design wind code, any permitted exterior door replacement must meet current wind-load standards, which means the jalousie sections typically get replaced with solid impact-rated panels or product-approved glass. The rough opening itself is often set in concrete block with decades of settlement, so the new jamb has to be shimmed and flashed carefully. It is standard work for us, but it is not a drop-in slab swap. Call (813) 320-9346 and we will explain what your specific opening needs.
Yes, exterior door replacements in Pinellas Park require a permit, and the process changes depending on whether the home is site-built or a manufactured unit. Site-built concrete block homes follow Pinellas County’s standard structural and wind-load review. Manufactured homes go through a separate pathway tied to HUD-code compliance, and the door must be rated for the unit’s wind zone. We pull the permit, manage the inspection, and walk you through the paperwork. Both warranty layers get registered before our truck leaves your driveway. Call (813) 320-9346 for a free estimate, and we will tell you exactly what your home type requires.
Written by Dale Kessler, Owner at TruePane Windows & Doors, bringing the Keystone Standard to Pinellas Park door installations since the company’s founding in 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.