Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Lighthouse Point
Replacing a sliding patio door in Lighthouse Point means working around two realities at once: Broward County’s High-Velocity Hurricane Zone mandate for impact-rated glazing, and a canal-grid microclimate where salt-laden humidity finds every piece of hardware on every elevation of the house. A patio slider here is not the same job as one ten miles inland. The frame has to hold up to wind-load testing that most doors never face, and the rollers, track, and fasteners have to survive omnidirectional salt air that corrodes standard steel within a few years. We have been doing exactly this work in Lighthouse Point long enough to know which products hold up and which ones fail early. Call (813) 320-9346 to talk through what your door needs.
Key Takeaways
- Sliding and patio door replacement in Lighthouse Point typically runs $2,800-$11,500 depending on size, impact rating, and frame material.
- Marine-grade stainless hardware is the baseline specification here, not an upgrade, because canal humidity attacks every elevation.
- Custom-sized units for 1950s-1970s CBS ranchers often add 6-10 weeks of lead time, not because of labor but because the manufacturer builds to order.
- We lock pricing in writing at order, register both warranty layers before we leave the driveway, and stand behind the work for 90 days with our Done Right Promise.
- A live person answers the phone 24 hours a day, seven days a week. No voicemail tree.
Why TruePane Windows & Doors Is Lighthouse Point’s Preferred Sliding & Patio Doors Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler, but the craft behind it goes back many years. Dale started the company because he kept seeing the same two failures: out-of-true installs that voided manufacturer warranties, and homeowners left with no one to call when the seal fogged or the door bound in July. The rule on the whiteboard has never changed: if the pane is not true, the job is not done.
In Lighthouse Point, that rule matters more than most places. We have worked on canal-front ranches along NE 31st Court, two-story CBS homes near Lighthouse Drive, and plenty of houses where the rear slider faces the water on two or three sides. Our technicians know what a corroded jamb screw looks like before they touch it, and they quote marine-grade hardware as a standard line item because in this city it is one. We are an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, and CGI, and we show you side-by-side quotes on paper so you see exactly what you are buying.
Every job in Lighthouse Point is covered by the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. No paperwork fights, no arguing. We hire local, train apprentices into journeymen, and act like a company that plans to be in town in thirty years. Because we do.
Our Sliding & Patio Doors Services in Lighthouse Point
We replace, install, and service the full range of Sliding & Patio Doors for Lighthouse Point homeowners. Here is how we approach the four jobs we do most in this city.
Patio Sliding Doors
A standard two- or three-panel patio slider in Lighthouse Point has to do more than glide. It has to carry an HVHZ product approval, seat square in a rough opening that was likely framed for a 1960s aluminum unit, and keep salt-laden air out of the track. We measure every opening twice, quote manufacturer lines side by side, and specify stainless fasteners and anodized or fusion-welded frames as the starting point. Most patio slider replacements in Lighthouse Point run $2,800-$6,200 installed, depending on size and impact rating.
Panoramic Sliding Systems
Panoramic systems are the biggest ticket in the category, and for good reason: they replace a wall with glass. In Lighthouse Point, where canal views are part of why people bought the house, a multi-panel ViewLux or Marvin panoramic system opens the rear elevation to the water. These jobs involve structural header work, floor tolerances, and lift-and-slide hardware that has to be marine-grade from the start. A typical panoramic slider in Lighthouse Point runs $8,500-$18,000 depending on panel count, glass spec, and whether the opening needs reframing. Lead times on custom units run six to twelve weeks. We lock the price in writing at order, so the calendar does not change the bill.
Heavy-Duty Sliding Doors
Some Lighthouse Point homes have oversized openings or commercial-style sliders that carry a lot of weight. Heavy-duty systems use reinforced tracks, tandem stainless rollers, and thicker insulated glass units. On a canal-front home where the door faces the Intracoastal, the wind-load requirement alone can push the spec into heavy-duty territory even if the panel count is ordinary. These jobs typically run $5,500-$12,000 in Lighthouse Point. We specify the hardware for salt exposure and wind load, not just for panel weight, because both are in play here.
Pocket & Barn Doors
Pocket and barn doors on interior openings are a different animal from exterior sliders, but Lighthouse Point homes from the 1950s and 1960s often have original pocket-door hardware that has been binding for decades. We replace tracks, hangers, and soft-close mechanisms, and we do full pocket-door retrofits when the wall cavity allows. Interior barn-door hardware in a canal-adjacent house still benefits from stainless components, because the salt air moves through every room, not just the ones facing water. Expect $1,200-$4,800 for a full pocket door replacement or barn door installation in Lighthouse Point.
Screen Door Installation rounds out the sliding and patio category. On Lighthouse Point canal homes, a screen door is not an add-on; it is the thing that lets you leave the slider open for a breeze without filling the kitchen with no-see-ums. We build and install custom screen doors sized to your existing slider, with aluminum frames that will not corrode in the canal air. Screen door installation in Lighthouse Point typically runs $450-$1,400 depending on size, frame finish, and mesh type.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
We service and install sliding and patio doors from more than a dozen manufacturer lines, and in Lighthouse Point we most often quote Andersen, Pella, and Marvin for full replacements, with ViewLux coming up regularly for impact-rated panoramic systems. Each line has different lead times, warranty structures, and hardware options, and we put those differences on paper so you can see them side by side. We carry common replacement parts, rollers, and track components for immediate repairs, and we handle warranty registration for both the glass and the frame before we leave the job. If you have an existing slider from a brand not on that list, call us. We will tell you honestly whether it is worth repairing or whether replacement makes more sense in this climate.
Common Sliding & Patio Doors Problems We See in Lighthouse Point Homes
Lighthouse Point’s canal grid creates a failure pattern we see over and over. Here are the four most common problems in this city.
- Seized rollers from canal-humidity salt. Standard steel bearings inside roller assemblies corrode within three years of salt-laden humidity. The door still works, but it takes two hands and a hip to open it. Marine-grade stainless rollers solve this, and they are the baseline spec on every tracker replacement we do in Lighthouse Point.
- Corroded jamb screws that shear during removal. On a canal-front ranch off NE 31st Court, we replaced a 1970s aluminum slider with a ViewLux impact-rated panoramic system. The original jamb screws were so corroded they sheared during removal. We reframed the rough opening with pressure-treated blocking and flashed the sill with butyl tape before setting the new fusion-welded frame. That is not an edge case here; it is a regular Tuesday.
- Hairline cracks in non-fusion-welded vinyl frame corners. After repeated thermal cycling in Broward County heat, vinyl frames without fusion-welded corners develop cracks at the sash corners. Salt-laden moisture works into the insulated glass unit and the seal fails. The fog between the panes is the tell, and by then the fix is usually a new door, not a new seal.
- Interior-facing doors with oceanfront-level corrosion. Because Lighthouse Point lots sit on canals on two or three sides, even the slider that faces the street shows advanced hardware corrosion. The salt-air exposure is omnidirectional. That is why we quote marine-grade hardware as a standard line item on every job in this city, not as an optional upgrade.
Pricing for Sliding & Patio Doors in Lighthouse Point, FL
Here is what you can expect to pay in Lighthouse Point for the work we do most often. These are installed ranges, not product-only prices.
| Service | Typical Range |
|---|---|
| Patio sliding door replacement (standard 2-panel, impact-rated) | $2,800-$6,200 |
| Panoramic sliding system (3-6 panels, custom) | $8,500-$18,000 |
| Heavy-duty sliding door (oversized or high wind-load) | $5,500-$12,000 |
| Pocket or barn door full replacement | $1,200-$4,800 |
| Screen door installation (custom-sized to existing slider) | $450-$1,400 |
| Roller and track replacement (existing door, no frame work) | $350-$900 |
What moves the number in Lighthouse Point: whether the unit is impact-rated, the exact rough opening size (non-standard openings from the 1950s-1970s CBS stock often require custom-sized units), whether the original frame has corroded fasteners that force reframing, and the manufacturer lead time on custom glass. We give you a written line-item quote before any work starts, and the price does not change once the order is placed. You can also take a free written repair estimate, and we hold a permanent 5% discount for seniors and veterans. Call (813) 320-9346 for a free, written estimate on your specific door.
We Also Serve Cities Near Lighthouse Point
TruePane serves Lighthouse Point and the surrounding Broward communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are a few miles out and wondering whether we cover your street, call us. Our dispatch and scheduling are coordinated from our Miami (South FL) office, and crews serve Lighthouse Point locally every week.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Lighthouse Point
Because Lighthouse Point’s canal grid means no side of the house is dry. Salt-laden humidity from the canals and the Intracoastal moves through the air on every elevation, so the slider facing the street gets the same hardware corrosion as the one facing the water. Standard steel bearings inside rollers seize within three years in this microclimate. Marine-grade stainless rollers, anodized tracks, and stainless fasteners are not an upgrade here; they are the baseline specification if you want the door to open easily five years from now. Call (813) 320-9346 and we will tell you exactly what hardware your current door has and what it would cost to correct it.
Yes, and the reason is the manufacturer, not us. Homes platted in the 1950s through 1970s in Lighthouse Point frequently have non-standard rough openings that require custom-sized impact units rather than off-the-shelf stock sizes. Custom low-E insulated glass units, especially for ViewLux or Marvin panoramic systems, carry a six-to-twelve-week manufacturer lead time. Labor is not what sets the calendar on this tier of work; the glass order does. What we control is the price: we lock it in writing at order, so the eight-week wait does not change the bill. If your schedule can absorb the lead time, you get the right door sized to your opening. If you need something faster, we will tell you honestly what stock-sized options exist and whether they can work in your opening.
Fog between the panes means the insulated glass unit’s seal has failed, and in Lighthouse Point salt-laden moisture has already gotten between the glass. On most modern sliding patio doors, the glass unit can be replaced without replacing the entire door frame, provided the frame is sound and the hardware is serviceable. But on older 1960s and 1970s doors, especially ones with non-standard sized openings, you are often better off replacing the whole unit: the frame is likely out of square, the rollers are likely corroded, and the cost of a new insulated glass unit plus new hardware plus reframing labor can approach the cost of a new impact-rated door. We will tell you which path makes sense for your specific door. Call (813) 320-9346 for an honest assessment, not a sales pitch.
They are a real line item, and they are worth taking seriously. A screen door on a canal-front slider in Lighthouse Point lets you leave the door open for the breeze without filling the room with insects, and it also takes the same salt-air exposure as the door behind it. Standard aluminum screen frames corrode, and cheap mesh tears within a couple of seasons. We build custom screen doors sized to your existing slider with corrosion-resistant aluminum frames and your choice of mesh, including tighter weaves for no-see-ums that are common near the water. Budget $450-$1,400 depending on size and mesh. It is not an afterthought on a $6,000 slider; it is the part that makes the door livable.
It depends on what we find when we pull the panel. If the frame is square, the jamb screws are not corroded to the point of failure, and the track is not pitted, we can replace the rollers and track and put the panel back on. That job runs $350-$900 in Lighthouse Point. But if the jamb screws shear during removal, or the track is corroded through, or the frame has twisted out of square after decades of thermal cycling, the repair becomes a frame-out replacement. We will not know until the panel is off, and we will tell you what we find before we do anything else. A live person answers the phone at (813) 320-9346, day or night.
Call TruePane Windows & Doors for Sliding & Patio Doors in Lighthouse Point
You have lived in your Lighthouse Point house long enough to know that a cheap bid on a slider is not cheap when the door binds in July and the contractor does not answer the phone. We have been doing this work since 2008 through Dale Kessler’s second-generation craft, and we will still be here when the warranty question comes up. We measure twice, quote manufacturer lines side by side on paper, register both warranty layers before the truck leaves, and stand behind the work with the 90-Day Done Right Promise. If the pane is not true, the job is not done. Call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lighthouse Point and surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.