Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Boynton Beach
Window installation in Boynton Beach carries a specific set of demands: salt air off the Atlantic, 170 mph design wind ratings required by Palm Beach County, and tens of thousands of older CBS condo units with rough openings that no stock window fits anymore. We handle all three, every day. Our crews work in Century Village, Leisureville, and the single-family neighborhoods east of Congress Avenue, and we quote every job against what the county actually requires, not what’s cheapest. If you’re pricing window replacement in Boynton Beach, call (813) 320-9346 and we’ll give you a written line-item estimate.
Why TruePane Windows & Doors Is Boynton Beach’s Preferred Window Installation Company
We’re a second-generation glazier’s company, founded by Dale Kessler in 2008, and we’ve built our Boynton Beach work around the realities of this market: HOA phase-wide retrofits, field-measured custom sizing, and impact glazing that holds up to salt air and hurricane season. Property managers in Leisureville and Century Village know our crews by name. That matters when an HOA board is deciding who gets an 80-unit permit package.
Our Boynton Beach customers tend to be homeowners who’ve lived in their unit for twenty or thirty years and intend to stay. They remember the contractor who left a fogged seal or a slider that binds every July. We get called after that. Our answer is the same on every visit: measure twice, register both warranty layers in writing before the truck leaves, and stand behind the work for 90 days under our Done Right Promise. No paperwork fights. No arguing.
We don’t use a call center. A live person answers the phone 24 hours a day, 7 days a week. When you call about a window in Boynton Beach, the person on the line knows the difference between a Century Village CBS jamb and a single-family frame on Miner Road.
Our Window Installation Services in Boynton Beach
Sliding Windows
Sliding windows are the most common original fenestration in Boynton Beach’s 1960s-70s CBS condos, and the most common failure point. Aluminum frames oxidize in the salt air, tracks wear, and the multi-point locks seize if they weren’t marine-grade. We replace them with impact-rated sliders that meet the county’s 170 mph wind-borne debris rule, and we field-measure every opening because few of these frames match modern stock sizes.
Single & Double Hung Windows
Single and double hung windows show up in Boynton Beach’s older single-family homes, especially the CBS houses between Federal Highway and Congress Avenue. The original wood or aluminum sashes are often painted shut or out of square. We reset the jamb, install fusion-welded frames, and register both manufacturer warranty layers in writing before we leave the driveway. That’s the Keystone Standard on every job, not an upsell.
Casement Windows
Casement windows give Boynton Beach homeowners a better seal against wind-driven rain, which is a real concern this close to the Intracoastal. The crank hardware is also the first thing to corrode. We quote both the sash and the hardware replacement so you see exactly what’s going in, and we use marine-grade components on any casement install east of I-95.
Fixed & Picture Windows
Fixed picture windows are common in Boynton Beach living rooms that face the water or a garden view. The glass itself is usually the reason we’re called: failed seals, fogging, or impact cracks from a storm. We replace the insulated glass unit or the full frame depending on what the opening can take, and we make sure the new glazing carries current Florida Product Approval numbers for this wind zone.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boynton Beach
We’re an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper so you see the difference in cost and spec before you commit. In Boynton Beach, that typically means PGT impact-rated lines for condo compliance work, Simonton for energy-efficient retrofits on single-family homes, and CGI for heavy coastal exposure near the Intracoastal. We keep local parts stocked for the common failures we see, so a hardware replacement on an impact slider doesn’t wait on a freight delivery. For broader context on what we install, see our Window Installation service guide.
Common Window Installation Problems We See in Boynton Beach Homes
- Non-compliant original glazing in 55+ communities. Century Village and Leisureville units were built with single-pane aluminum sliders and jalousies that don’t meet Palm Beach County’s current wind-borne debris protection rules. A cheap replacement that skips Florida Product Approval leaves the unit out of compliance and can void an insurance claim later.
- Stock frames jammed into non-standard CBS rough openings. The 1960s masonry openings in these buildings were sized for window dimensions that were discontinued decades ago. Installing a stock size means oversized gaps, grinding, or infill that compromises the flashing tape seal.
- Salt-air hardware corrosion. Multi-point locking mechanisms on impact sliders seize within two years if they aren’t marine-grade. We see this constantly in the condos along the Intracoastal and in the neighborhoods off Federal Highway.
- Hollow-metal door frames rusting from the inside out. On single-family CBS homes east of Congress Avenue, the original hollow-metal frames around sliding doors corrode internally and need full buck replacement, not a simple door swap.
Pricing for Window Installation in Boynton Beach, FL
A typical sliding window replacement in a Boynton Beach CBS condo runs $700 to $1,600 per opening depending on glazing spec and frame condition. Casement windows for single-family homes generally land between $900 and $2,200 installed. Fixed picture windows with impact-rated glass run $800 to $2,500 depending on size and whether the frame can be reused. Single and double hung retrofits in older CBS homes typically run $750 to $1,800 per window. These are installed prices including field measurement, permitting, and both warranty layers registered in writing.
What moves the number most is whether the rough opening needs grinding or infill, which is common in Century Village and Leisureville. We quote exact line items up front, and we offer a standing 5% discount for seniors and veterans. Call (813) 320-9346 to schedule a free estimate for your Boynton Beach windows.
We Also Serve Cities Near Boynton Beach
Our window installation crews cover Boynton Beach and the surrounding communities, including Delray Beach, Greenacres, Boca Raton, and West Palm Beach. If you’re in a neighboring city and need the same field-measured, impact-rated work, our Window Installation in Boynton Beach team serves the whole southeastern Palm Beach County corridor.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Boynton Beach
Yes. Palm Beach County’s adopted ASCE 7 wind maps place coastal Boynton Beach at a 170 mph design wind speed, which makes Florida Product Approval impact-rated glazing effectively mandatory on any permitted replacement project. Century Village and Leisureville are under this requirement. Any window replacement that skips this spec is out of compliance and can void future insurance claims. We quote only compliant product for these buildings, and we register the approval numbers in writing. Call (813) 320-9346 for a line-item quote specific to your unit.
For CBS condos, the inspector checks the product approval numbers against the permit, verifies the anchoring method into the masonry, and looks for proper flashing at the rough opening. They may also check that the installed glass carries the correct design pressure rating for the building’s wind zone. If a contractor skips the HOA permit package or installs non-compliant stock frames, this inspection surfaces it. Our installs are prepared for this inspection from the first measurement, and both warranty layers are registered before the truck leaves.
When the install is documented with Florida Product Approval numbers and a completed permit, most insurers apply a wind mitigation discount to the policy. The discount can be substantial for older CBS condos that were previously flagged as non-compliant. The documentation matters as much as the glass; a cash quote with no permit paper trail doesn’t move your premium. We leave you with the approval numbers and permit closeout for that reason. Call (813) 320-9346 and we’ll walk you through what your insurer will ask for.
Because the 1960s masonry rough openings in these buildings were framed for aluminum window dimensions that were discontinued decades ago. A modern stock frame won’t sit true in those openings. In one Century Village phase, our crew measured 94 identical-looking CBS units and found slight variance in nearly every jamb. We field-measured each opening, custom-ordered the impact-rated glazing with fusion-welded frames, and flashed with butyl tape before setting each sash. That’s the difference between a retrofit that lasts and one that fights the building from day one.
Plan on inspecting the sliding window hardware every two to three years if the unit is within a mile of the Intracoastal or the Atlantic. The salt air oxidizes aluminum frames and corrodes multi-point locking mechanisms much faster here than even ten miles inland. If the lock feels stiff or the track is pitted, that’s the early warning. Marine-grade replacement hardware is the fix, and it’s a small job compared to replacing a seized sash. We stock the common parts locally. Call (813) 320-9346 for a hardware inspection quote.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boynton Beach and the surrounding communities with field-measured, impact-rated window installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.