Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Fort Lauderdale
Window installation in Fort Lauderdale means working inside Broward County’s High-Velocity Hurricane Zone, where every replacement unit has to carry a Miami-Dade Notice of Acceptance or Florida Product Approval. That is not a suggestion. It is the code, and it changes what products can go into your house, what the permit requires, and how long the job takes before the first window comes off the truck. If you are pricing windows in Coral Ridge, Victoria Park, or Rio Vista, you need a company that knows the HVHZ rules cold, handles the engineering drawings, and pulls the permit so the inspection passes the first time. Call TruePane Windows & Doors at (813) 320-9346 and we will walk you through what your house actually needs, on paper, before any money changes hands.
Why TruePane Windows & Doors Is Fort Lauderdale’s Preferred Window Installation Company
We have been doing this work long enough to know that Fort Lauderdale is not like the rest of Florida. The canal network alone, over 300 miles of tidal water running through residential streets, puts salt-laden air against window frames every single day. That means a product that works fine in Plantation will corrode years earlier here unless the frame finish and hardware are specified for marine exposure. Our background-checked, uniformed technicians measure every opening twice and quote manufacturer lines side by side on paper, so you see exactly what you are buying and why. And because a live person answers our phone 24 hours a day, seven days a week, you will never be routed through a voicemail tree when you call about a permit question or a window that is binding after a storm.
Homeowners in Fort Lauderdale call us because we do not treat installation as a transaction. We register both manufacturer warranty layers in writing before the truck leaves your driveway, under what we call the Keystone Standard, and every job carries a 90-Day Done Right Promise. If it is not done right, we make it right. No paperwork fights, no fine print that covers neither. Dale Kessler founded this company on a rule that still sits on the whiteboard: if the pane is not true, the job is not done. That rule governs every install our crew makes in Fort Lauderdale.
Our Window Installation Services in Fort Lauderdale
Casement Windows
Casement windows are the workhorse for Fort Lauderdale’s older concrete block stucco homes, especially the 1950s and 1960s ranches in Coral Ridge and Colee Hammock. They crank outward and seal tight against the frame when closed, which makes them one of the better-performing styles in HVHZ wind-load requirements. We install casement units from Window Installation lines that carry Miami-Dade NOA as a standard, and we fit them with marine-grade stainless hardware because the salt air off the canals will eat ordinary zinc hardware in a few years. A comment from a Coral Ridge homeowner was that the new casements cut the street noise from Commercial Boulevard noticeably.
Awning Windows
Awning windows hinge at the top and push outward from the bottom, which means they can stay cracked open during a light rain without letting water pour into the house. That matters in Fort Lauderdale, where afternoon storms roll through ten months a year. They work especially well in bathrooms and above kitchen counters in older homes, where the original jalousie windows let in rain, bugs, and heat. We install awning units with fusion-welded frames rated for the wind pressures the Broward County building department requires, and we spec laminated impact glass that meets the same HVHZ standard as the rest of the house.
Fixed & Picture Windows
Fixed and picture windows are common on the canal-facing walls of Rio Vista and along the Intracoastal, where the view is the whole point of the room. These units do not open, so their strength comes from the frame and the laminate layers in the glass. In Fort Lauderdale, a fixed window on a windward wall above a canal needs a much higher design pressure rating than the same window on an interior wall. We quote the product that matches the specific opening, not a one-size-fits-all number, because the city inspector checks the NOA documents against the permit drawings. Every unit we install on those exposed elevations carries the stamped paperwork to prove it.
Single & Double Hung Windows
Single and double hung windows remain popular in Fort Lauderdale’s mid-century homes because they fit existing rough openings with minimal stucco repair. The problem in this climate is that the balance systems and tilt latches take a beating from humidity and salt aerosol. We install hung units with compression weatherstripping and hardware finishes rated for coastal exposure. In older Coral Ridge and Victoria Park homes where the original sashes have lost their argon and the frames are pitted, we replace the entire opening rather than attempting a sash-only retrofit that would fail again in a few years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lauderdale
We are an authorized installer for more than a dozen manufacturer lines, and for Fort Lauderdale homes the brands that matter most on impact work are PGT, CGI, and Simonton. PGT and CGI build their product lines around Miami-Dade NOA compliance from the start, which takes a lot of the permitting guesswork out of the job. Simonton offers solid mid-range impact lines that meet Florida Product Approval where that is sufficient. We quote these side by side on paper so you can see the frame material, glass package, and design pressure rating for each one, and we keep local stock access for Fort Lauderdale orders so a single broken sash does not leave an opening boarded up for a month.
Common Window Installation Problems We See in Fort Lauderdale Homes
- No Miami-Dade NOA on the product. A contractor installs a window with Florida Product Approval but no NOA, and the city of Fort Lauderdale denies the permit. The job halts, materials get swapped, and the homeowner eats the delay. We verify the NOA before ordering anything.
- Salt corrosion on frames and hardware. Homes along the tidal canals and within a mile of the ocean get brackish air and Atlantic salt aerosol year-round. Aluminum frames pit, steel screws rust, and operable sashes seize within a few years unless marine-grade finishes are specified from day one.
- Seal failure in older insulated glass. The original single-pane sliders and even some early double-pane units lose their seal in Fort Lauderdale’s subtropical humidity. The glass fogs permanently, the argon escapes, and the window loses most of its insulating value without ever showing structural damage.
- Skipped engineering drawings. Fort Lauderdale’s building department requires signed-and-sealed shop drawings from a Florida PE for most window replacement permits. Skip that step and the permit application is rejected before the first window is touched, adding three to four weeks of delay while the drawings are prepared.
Pricing for Window Installation in Fort Lauderdale, FL
Window installation in Fort Lauderdale runs higher than inland Broward because of the HVHZ code requirements. A typical impact-rated casement window for an existing masonry opening runs $900 to $1,600 per unit, installed. A fixed or picture window with impact glass and a Miami-Dade NOA typically falls between $800 and $1,400. Awning windows run $700 to $1,200. A single hung impact unit starts around $650 and goes up based on size and design pressure rating. The signed-and-sealed engineering drawings add $400 to $900 to the permit package, depending on the number of openings and the wall construction. A full retrofit on a 1950s Coral Ridge ranch with 12 to 16 openings commonly lands between $14,000 and $26,000. Call (813) 320-9346 for a written line-item quote, free, with no obligation and no surprise line items on the bill.
We never promise fast, scheduled installation on planned replacement work, and a reputable contractor in Fort Lauderdale should not either. Permitted retrofit work during hurricane season routinely stretches lead times to 8 to 14 weeks because the supply chain for approved impact products tightens up. We will tell you the real schedule before you sign anything.
We Also Serve Cities Near Fort Lauderdale
Our crew serves Fort Lauderdale and the surrounding communities including Plantation, Pompano Beach, Hollywood, and Coconut Creek. If you are in one of those cities and need Fort Lauderdale level product knowledge applied to your house, call the same number and ask for our window team. The code requirements shift at the Broward County line, and we quote accordingly.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Fort Lauderdale
Yes. Fort Lauderdale sits inside Broward County’s High-Velocity Hurricane Zone, and the city’s building department requires every replacement window and door to carry a Miami-Dade Notice of Acceptance. Florida Product Approval alone is not enough, even though it is legal in Boca Raton, Orlando, and most of the rest of the state. The city inspector will check the NOA number against the permit documents at inspection, and a unit without one fails. We verify NOA compliance before we order any product for a Fort Lauderdale job. Call (813) 320-9346 for a quote that includes the documentation.
Because the HVHZ wind-load calculations must be certified by a Florida-licensed professional engineer for almost every replacement opening in the city. The building department wants a PE stamp on the shop drawings that shows the window’s design pressure rating matches the specific wall, elevation, and exposure of your house. That step takes three to four weeks on the front end before the permit is even issued. We handle the drawings internally and include them in the permit package so the job is not delayed by paperwork surprises.
Insurance carriers in Broward County typically offer premium discounts for documented impact-rated windows with a Miami-Dade NOA, because the wind mitigation credit reduces the insurer’s risk on a roof and envelope failure. The key is documentation. The policyholder must file the NOA paperwork with the carrier, and many homeowners do not know to do it. We hand over the NOA documentation for every unit at the end of the job and tell you what to send to your agent. The exact discount varies by carrier and policy, but the credit for a fully protected opening is meaningful on a Fort Lauderdale windstorm premium.
Low-E coatings and argon fill work in hot, humid climates too, and Fort Lauderdale is no exception. The low-E coating blocks a large portion of the solar heat gain coming through the glass, which reduces cooling load and keeps the room more comfortable. Argon is a denser gas than air and slows heat transfer between the panes in both directions. In a climate where air conditioning runs nine months a year, the combination lowers the solar heat gain coefficient on the window and directly reduces what the AC unit has to fight. The benefit shows up on the FPL bill and in afternoon comfort on west-facing rooms.
Salt corrosion and seal failure. The original windows in those neighborhoods are frequently jalousie or single-pane aluminum sliders from the 1950s and 1960s, and the salt aerosol from the Atlantic and the tidal canals has spent decades attacking the aluminum frames and steel hardware. The frames pit, the rollers bind, the sash locks seize, and eventually the window will not operate without force. On double-pane units, the humidity accelerates desiccant saturation inside the spacer, so the seal fails and the glass fogs permanently. Call (813) 320-9346 to have us look at your openings and give you a straight answer on what needs to be replaced.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale and Broward County with permitted, code-compliant window installation since 2008 through the company’s heritage of craft and community commitment.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.