Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Fort Lauderdale
Energy-efficient window replacement in Fort Lauderdale runs $850-$1,450 per opening for a standard low-E, argon-filled impact unit, installed and permitted. That’s the honest range we quote most weeks, and it includes the engineering drawings Broward County’s High-Velocity Hurricane Zone demands before a single window leaves our truck. If you’re in Coral Ridge, Victoria Park, or Rio Vista and tired of air conditioning that never stops running, call us at (813) 320-9346. We’ll walk the house, measure every opening twice, and put a written quote in your hand that tells you exactly what the permit will require.
Why TruePane Windows & Doors Is Fort Lauderdale’s Preferred Energy-Efficient Windows Company
We’ve been setting windows in Fort Lauderdale long enough to know what the building department on NW 1st Avenue is going to ask for before they ask it. Led by Dale Kessler, our crews work in this city week in and week out, pulling HVHZ permits, stamping shop drawings through local engineers, and replacing the original single-pane aluminum sliders that still sit in thousands of 1950s and 1960s concrete block homes. Homeowners here tend to call us after another company’s quote fell apart at the permit counter. Our job is to make sure that doesn’t happen twice.
Every TruePane technician is background-checked and uniformed. Every job carries the 90-Day Done Right Promise under The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If the pane is not true, the job is not done. That’s the rule Dale keeps on the whiteboard, and it’s the standard we apply on every Fort Lauderdale install, from a single fogged sash in Colee Hammock to a full-house replacement facing the intracoastal.
Key Takeaways for Fort Lauderdale Homeowners
- Every replacement window here must carry Miami-Dade NOA or Florida Product Approval. A unit legal in Boca Raton won’t pass Broward permitting.
- Plan for 3-4 weeks of engineering and permit lead time before installation. Anyone promising faster is skipping a step that will catch up with you.
- Canal-front and intracoastal homes need hardware and seal upgrades beyond the stock unit. Salt air eats standard EPDM glazing beads in under a decade.
- Free estimates include a written scope, permit requirements, and a fixed price. Call (813) 320-9346.
Our Energy-Efficient Windows Services in Fort Lauderdale
Low-E & Argon Gas Glass
Low-E coatings are the workhorse of energy-efficient windows in Fort Lauderdale, reflecting solar heat back out while argon gas between panes slows thermal transfer. In a city where the sun pounds concrete block and tile roofs nine months a year, a proper low-E, argon-filled unit can cut the heat load on a west-facing room by a third. But the spec matters: on canal-front homes in Rio Vista, we specify low-E coatings paired with ratings matched to the salt exposure, because the seal holding that argon in place is exactly what brackish air attacks first.
ENERGY STAR Replacement Windows
ENERGY STAR in South Florida is not the same as ENERGY STAR in North Carolina. The Southern Zone criteria are built around cooling, not heating, and Fort Lauderdale homes need a U-factor and solar heat gain coefficient tuned to year-round air conditioning load. We quote ENERGY STAR replacement windows in Fort Lauderdale with the numbers on paper, side by side, so you can see which units actually reduce your FPL bill rather than just carrying a sticker.
Double & Triple Pane Windows
Double-pane is the floor for any Fort Lauderdale replacement that has to pass HVHZ impact code. Triple-pane is possible in many homes, but it’s not always the right answer. A triple-pane unit weighs more, costs 20-35% more per opening, and can require beefed-up framing in a 1960s CBS house where the rough openings were set for skinny aluminum sliders. In Victoria Park and Colee Hammock, we measure the existing opening, check the lintel condition, and tell you straight whether that weight and thickness works without rebuilding the wall around it.
UV-Blocking & Fade Protection
Fort Lauderdale sun fades furniture, floors, and artwork through any untreated glass, but the faster fade you see on canal and beach-corridor homes often comes from glass that’s also letting heat through, and you’re paying to cool it away twice. UV-blocking low-E coatings cut the fading wavelengths without making the room dark, and they extend the life of whatever’s inside by a real margin. For homes along Las Olas Boulevard or the Galt Ocean Mile, we spec UV-filtering units that hold up to salt air, because a coating’s no good if the frame around it is pitting out in seven years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lauderdale
We’re authorized installers for more than a dozen manufacturer lines, and in Fort Lauderdale we lean on the ones that have already done the homework for Broward County’s HVHZ rules. For this market we regularly quote ES Windows, ECO Window Systems, all of which carry the Miami-Dade NOA paperwork this building department requires. Because we quote those manufacturer lines side by side on paper, you see the glass package, the frame, and the warranty duration for each line before you spend a dime. And if you’re consolidating your Energy-Efficient Windows project across multiple rooms, we’ll spec each opening to the right product rather than a one-size-fits-all bid.
Common Energy-Efficient Windows Problems We See in Fort Lauderdale Homes
- Salt-corroded aluminum frames and steel hardware. On canal-front and intracoastal properties, the original single-pane sliders installed in the 1960s are often seized in their tracks, pitted at the corners, or so corroded at the balance springs that the sash won’t stay open. An energy-efficient replacement that ignores that condition will fail from the frame inward.
- Blown seals on older “Low-E” units. Condensation or fog between the panes means the argon-filled insulated glass unit has lost its seal. Along the intracoastal, the EPDM glazing beads that hold that seal fail faster than anywhere inland, and a fogged unit is doing almost nothing for energy efficiency.
- Missing or failed waterproofing at the rough opening. On a 1962 CBS house in Coral Ridge, we pulled original sliders to find raw stucco butted against the frame, swollen from decades of salt air off the canal two blocks away. We flashed every jamb with peel-and-stick membrane before setting the new fusion-welded frames, and the homeowner told us the last contractor had quoted a product that was never going to pass permit.
- Windows that were never legal for the hurricane zone. We see them constantly: a homeowner had windows replaced fifteen years ago by someone using a product approved in Boca Raton, and it’s still in the wall. When those homes go under contract, the windows flag on inspection, and the seller is calling us to fix a job that should never have been permitted in Fort Lauderdale.
Pricing for Energy-Efficient Windows in Fort Lauderdale, FL
Here are the numbers we quote in this market. A standard low-E, argon-filled impact replacement runs $850-$1,450 per opening, installed, including new interior and exterior trim and permit drawings. A double-pane ENERGY STAR unit with basic low-E glass sits at the lower end; a triple-pane ViewLux or ES Windows unit with upgraded hardware and balcony-rail accommodations runs toward the top. Window energy audits and ratings are typically $250-$450. If you’re in Coral Ridge, Victoria Park, or Colee Hammock, canal-front salt exposure may add $100-$250 per opening for upgraded stainless hardware and marine-grade seal details. Every quote is a fixed price, written, with the permit scope called out. Call (813) 320-9346 to schedule a free estimate, and we’ll walk the house with a moisture meter and a straightedge, not a sales script.
We Also Serve Cities Near Fort Lauderdale
Our crews work up and down the Broward corridor, so if you’re just outside Fort Lauderdale, it’s likely we’re already in your neighborhood. We serve Plantation, Pompano Beach, Hollywood, and Coconut Creek, with the same written quotes and the same permitting discipline. For a full look at how we approach this market, see our Fort Lauderdale service page.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Fort Lauderdale
No. Fort Lauderdale sits inside Broward County’s High-Velocity Hurricane Zone, and every replacement window must carry a Miami-Dade Notice of Acceptance or Florida Product Approval. A unit legal in Boca Raton, which is outside the HVHZ, simply cannot be permitted here, no matter how good its ENERGY STAR ratings look on paper. Before you buy any window, check the NOA number against the Broward permit package, or call (813) 320-9346 and we’ll verify it for you as part of the free estimate.
Because Fort Lauderdale requires signed-and-sealed engineering drawings, stamped by a Florida PE, for most replacement window permits under HVHZ rules. That’s not a city attitude; it’s the code. A job that pulls an over-the-counter permit in Boca Raton takes three to four weeks here just to get the drawings approved, before any window is touched. Any contractor who doesn’t tell you that up front is either unaware of the local code or planning to skip a step that will strand your house with open holes in the wall.
Yes, over time, if the units aren’t spec’d for it. Salt aerosol from the canal and the Atlantic corrodes aluminum frames and steel hardware on canal-front homes in five to eight years, and once the frame or weatherstrip goes, the insulated glass unit loses its seal and the energy savings go with it. We specify upgraded stainless hardware and marine-grade seal materials on canal-front Fort Lauderdale installs, which adds a modest cost per opening but keeps the window performing for the life of the glass package.
Fog between the panes means the insulated glass unit seal has blown and the argon or krypton fill has leaked out. That’s a glass unit failure, not a frame failure, and under most manufacturer warranties the IGU is covered for a specific number of years. If the warranty was never registered, which happens more often than it should, the coverage may be unenforceable. Our Keystone Standard registers both warranty layers in writing before the truck leaves the driveway, so this exact situation doesn’t become a paperwork fight. Call (813) 320-9346 and we’ll tell you whether it’s a warranty claim or a replacement.
Sometimes. Triple-pane units are heavier and thicker than double-pane, and in 1970s CBS construction the rough openings were often framed for thin aluminum sliders. We measure every opening, check the lintel and jamb condition, and tell you directly whether the existing rough opening can carry the weight without reframing. In many Fort Lauderdale homes the answer is yes with a heavier-duty anchoring system; in some the more honest answer is a high-performance double-pane unit that costs less and performs nearly as well. We’ll put both numbers on paper and let you decide.
Call TruePane Windows & Doors for Your Free Fort Lauderdale Estimate
If you’re looking at energy-efficient windows in Fort Lauderdale, start with a company that knows what this city’s building department and salt air will do to the job before it’s bought. We’re led by Dale Kessler, we’ve served this community for years, and every quote is a fixed price with the permit scope written out. The ask is always the free estimate, never the hard sell. Call (813) 320-9346 and a live person will answer, 24 hours a day, 7 days a week. We’ll set a time, walk the house, and tell you the truth about what your windows need.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale and Broward County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.