Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Plantation Mobile Home Park
Window installation in Plantation Mobile Home Park follows a different rulebook than anywhere else in the county, and we’ll tell you that before you spend a dollar. Every home here is a manufactured unit, which means Florida’s HUD-code mobile home wind rules apply, not the standard building code. The work has to meet DHSMV wind-resistance specs, get documented, and pass inspection. That’s the job we do. Call (813) 320-9346 for a free estimate, and we’ll walk you through what your unit actually needs.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Window Installation Company
We’ve spent years working in manufactured-housing communities across South Florida, and Plantation Mobile Home Park is its own animal. The wall depths run two to three inches instead of six. The rough openings don’t match any standard residential size chart. The aluminum frames oxidize faster here than they do twenty miles inland. A window crew that only knows site-built homes will order the wrong unit, flash it wrong, and leave you with a leak by the first rainy season. We know the difference because we’ve corrected enough of those jobs.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you’re buying. And we register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s not a slogan. It’s the way Dale Kessler built this company: if the pane is not true, the job is not done.
When you call, a live person answers. Not a voicemail tree, not a callback form. That matters when you’ve got a jalousie that won’t close and a storm forming over Okeechobee Road.
Our Window Installation Services in Plantation Mobile Home Park
Casement Windows
Casement windows crank outward and seal tight against the frame when closed, which makes them one of the better choices for a manufactured home in a high-velocity hurricane zone. In Plantation Mobile Home Park, a casement retrofit typically runs $380 to $720 per unit installed, depending on whether the opening is standard or custom. We order units with DHSMV-rated impact glazing and fusion-welded frames cut to your wall depth.
Awning Windows
Awning windows open outward from the bottom, which suits South Florida’s rain patterns: you can leave them cracked for air during an afternoon downpour without water coming in. We replaced a failing jalousie in a 1980s single-wide off Okeechobee Road not long ago. The original louvers were rusted open and wouldn’t close, and the homeowner expected a simple glass swap. Our crew pulled a custom-order impact-rated awning unit sized to the non-standard 46×36 opening, installed it with butyl flashing tape and a frame milled to the home’s 2.5-inch wall depth, then coordinated the DHSMV compliance inspection so the retrofit passed on our first visit. That’s the difference between a window company and a mobile-home window company. Awning retrofits in the park run $410 to $760 per unit.
Fixed & Picture Windows
Fixed windows are the simplest and most affordable way to bring light into a mobile home without adding mechanical parts that can fail. In Plantation Mobile Home Park, fixed and picture units run $260 to $480 installed, depending on size and whether the opening needs adaptor framing. We set them in impact-rated glazing, which is required here. The sealant we use is rated for South Florida’s UV load, not whatever comes off the shelf at the supply house.
Single & Double Hung
Single and double hung windows are less common in older mobile homes, but they show up in newer double-wides and in units that have already had some retrofit work done. The challenge in Plantation Mobile Home Park is almost always the rough opening: a standard residential 36×48 hung unit won’t fit a 44×36 mobile home opening without adaptor framing. We handle that correctly, with flashing and sealing that survives a hurricane season. Expect $340 to $680 per unit, depending on size and wall-depth modifications.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
We install Simonton, Ply Gem, PGT, and CGI, along with a dozen other manufacturer lines. For Plantation Mobile Home Park specifically, PGT and CGI carry the mobile-home wind-resistance ratings your units need, and we can quote them side by side on paper so you see the cost difference on the same opening. We quote, order, and register the warranty in your name before we leave the driveway. When you schedule a Window Installation through TruePane, you’re not choosing between brands blind; you’ll see the numbers.
Common Window Installation Problems We See in Plantation Mobile Home Park Homes
- Non-standard rough openings. Older single-wides in the park have window openings that don’t match any current manufactured-home replacement size. We custom-order or use adaptor framing, instead of forcing a unit that leaks.
- Thin wall assemblies. A mobile home wall is typically 2 to 3 inches deep, not 6. A contractor who orders a standard residential window with a 4-inch sill profile can’t flash it correctly. Water gets in, and the first rain shows it.
- Jalousie windows that fail HUD rules. Florida mobile home rules make it illegal to replace old jalousie louvers in kind. A “glass repair” on a jalousie is not a repair; it’s a stopgap that leaves the unit non-compliant and uninsurable for storm damage.
- Ignored DHSMV wind-load requirements. Some crews drop in non-impact glazing and skip the permitting step. The county inspector fails the job, and the homeowner is left with no documentation for their insurer and a window that doesn’t meet the legal standard.
Pricing for Window Installation in Plantation Mobile Home Park, FL
A typical window installation in Plantation Mobile Home Park runs $260 to $760 per unit, depending on the window type, size, and whether your opening is standard or custom. That includes the unit, impact-rated glazing where required, adaptor framing if needed, butyl flashing, and DHSMV compliance documentation. Fixed windows start around $260. Casement and awning units land in the $380 to $760 range. Hung windows run $340 to $680. A full jalousie retrofit to a HUD-compliant unit usually falls between $550 and $900 per opening, because you’re paying for custom sizing, impact glazing, and the compliance inspection coordination. We give you a written, line-item quote before any work starts. No additions, no surprises on the bill. Call (813) 320-9346 to schedule a free estimate.
We Also Serve Cities Near Plantation Mobile Home Park
TruePane handles window and door work throughout the surrounding area, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in a neighboring community and want the same mobile-home-specific expertise, our Plantation Mobile Home Park crews route to those jobs as well. Call (813) 320-9346 and we’ll confirm who’s closest.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Plantation Mobile Home Park
Yes. Plantation Mobile Home Park is a manufactured-housing community, so every window replacement must meet Florida’s Department of Highway Safety and Motor Vehicles wind-resistance requirements for mobile homes, not the standard Florida Building Code. If your window doesn’t carry the right rating and the county inspector catches it, the job fails. Call (813) 320-9346 and we’ll confirm what your unit needs before you order anything.
Because Florida mobile home rules make in-kind jalousie replacement illegal. The old louvered design lacks hurricane resistance and insulating value, and a “glass swap” leaves you with a non-compliant unit that won’t pass inspection and won’t support an insurance claim if a storm hits. The legal path is a full retrofit to a HUD-compliant window. We handle that every week in Plantation Mobile Home Park.
A compliant quote includes the DHSMV wind-resistance rating for each unit, the correct wall-depth fit for your home, permit and inspection coordination, and both warranty layers registered in writing. A cheap quote leaves those out, either because the contractor doesn’t know mobile home rules or doesn’t want to spend the time. TruePane includes compliance in the price, not as an add-on.
In many cases, yes. Insurance carriers in South Florida look for documented wind-mitigation features, and a DHSMV-compliant window installation with the inspection record gives them something to credit. More importantly, if you ever file a storm-damage claim, the documentation proves the windows were legal at the time of the loss. Without it, the claim can be denied outright. We register both warranty layers and keep the paperwork straight.
Sometimes, but not often. Older single-wides in Plantation Mobile Home Park frequently have rough openings that don’t match any standard manufactured-home size, and wall depths that don’t accept a standard residential unit’s frame profile. In those cases, we custom-order or use adaptor framing built for your specific opening. We quote Andersen, Pella, Simonton, PGT, CGI, and others side by side, so you’ll see what actually fits and what it costs. Call (813) 320-9346 for an exact quote.
If you live in Plantation Mobile Home Park and your windows are original, fogged, rusted, or just don’t close tight anymore, call (813) 320-9346. We’ll send a background-checked technician to measure, quote in writing, and tell you exactly what your unit needs to meet Florida’s mobile-home wind rules. The estimate is free. The warranty paperwork is done before we leave. And if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.