Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Plantation Mobile Home Park
Impact windows and doors in Plantation Mobile Home Park have to meet a different standard than what a site-built house requires. We’re talking Florida DHSMV wind-resistance ratings for HUD-code manufactured homes, not the regular Florida Building Code that governs stick-built construction. That distinction changes everything about product sourcing, framing, flashing, and the paperwork your insurance company will want to see after a storm. TruePane Windows & Doors serves Plantation Mobile Home Park with mobile-home-specific impact window and door expertise, custom ordering, and full compliance documentation. Call (813) 320-9346 for a free estimate.
If you’ve lived in this community for any length of time, you already know that the original jalousie windows on older single-wides and the single-pane aluminum sliders on newer double-wides were never built for what South Florida wind does to a manufactured home. We know it too, because we’ve been inside enough of these units to see exactly how the wall cavities differ, where the leaks start, and what a compliant retrofit actually requires. This is not a standard residential window job with a different zip code. It’s a different product category.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Impact Windows & Doors Company
The reason homeowners in Plantation Mobile Home Park call us is simple: we don’t order the wrong window and then figure out how to make it fit. Most residential window contractors stock site-built replacement units with a 6-inch jamb depth. A HUD-code mobile home wall is typically 2 to 3 inches thick. That’s not a minor trim difference. That’s a fundamental incompatibility that produces protruding frames, unsealed jambs, and water intrusion the first time a summer storm drives rain sideways across the park.
Our Impact Windows & Doors team works from the wall outward, not from the catalog inward. We measure every rough opening twice, confirm the wall depth before ordering, and specify mobile-home-rated units from manufacturers who actually produce HUD-compliant lines. Dale Kessler founded TruePane on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. In a manufactured home park, “true” means square to the rough opening, sealed to a 2.5-inch wall, and documented to the DHSMV standard your insurer will check.
We answer the phone. A live person, 24 hours a day, 7 days a week. When you call about a window that’s been binding since the humidity set in or a door that won’t latch because the frame has shifted, you speak to someone who can actually schedule the work, not a callback form. Our technicians are background-checked and uniformed, and they treat your home the way they’d treat their own mother’s.
Our Impact Windows & Doors Services in Plantation Mobile Home Park
Hurricane Impact Windows
Most of what we install in Plantation Mobile Home Park is impact-rated aluminum or vinyl replacement windows sized specifically for manufactured home rough openings. The older units in this community, especially the 1970s and 1980s single-wides, have window openings that no longer match any standard replacement size on a supplier’s shelf. That means custom ordering, which we do regularly. The bigger issue is wind-load rating: Florida DHSMV requires mobile home windows to meet specific wind-resistance standards that differ from the Florida Building Code. We order to that standard and register the compliance paperwork.
Impact Sliding Glass Doors
Sliding glass doors in a manufactured home present the same wall-depth problem as windows but with a larger opening and more exposure. A standard site-built sliding door frame assumes a 6-inch wall. Your mobile home wall is a fraction of that. We source impact-rated sliding doors with jamb depths matched to the actual wall assembly, then flash and seal them with mobile-home-specific tape and backer rod. In a community like Plantation Mobile Home Park, where the units sit close together and wind channels between homes, a poorly sealed slider is a liability, not just an annoyance.
Impact Entry & French Doors
Entry doors on older manufactured homes are often hollow-core or thin aluminum units that offer almost no wind resistance. Replacing them with impact-rated doors requires more than swapping the slab. The rough opening usually needs reframing to accept the thicker jamb, and the threshold needs to be re-flashed to prevent water from wicking into the subfloor. We handle the full scope: framing, door, hardware, flashing, and the DHSMV documentation that makes the work insurable.
Impact Garage Doors
Some homes in Plantation Mobile Home Park have attached carports or small garage enclosures with lightweight doors that were never meant to take hurricane wind loads. Impact-rated garage doors for these structures are available, but they require wind-load bracing and track reinforcement specific to the opening. We quote these jobs honestly, with the reinforcement included, because a door that’s impact-rated but under-braced fails just as badly as the original.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and Simonton. What that means for a Plantation Mobile Home Park homeowner is access to impact-rated units that actually fit a HUD-code wall assembly and carry the DHSMV wind-resistance documentation your insurer requires. We quote manufacturer lines side by side on paper so you can see exactly what you’re buying and what it costs. We don’t push one brand over another. We push the one that fits your opening, meets the wind-load standard for your unit, and holds up to the South Florida sun and humidity that eats aluminum frames and window seals faster here than anywhere north of Lake Okeechobee.
Common Impact Windows & Doors Problems We See in Plantation Mobile Home Park Homes
- Jalousie retrofits that surprise the homeowner. Many older single-wides in Plantation Mobile Home Park still have louvered jalousie windows, which have essentially no hurricane resistance and almost no insulating value. Current Florida mobile home rules don’t allow replacing jalousie glass louvers in kind. A simple “glass repair” becomes a full HUD-compliant window retrofit, and homeowners who didn’t know that going in end up with a much bigger scope than they budgeted for.
- Contractors ordering site-built windows with 6-inch jambs. A site-built residential window company quotes the job from a standard catalog, orders units with 6-inch jamb depths, and discovers on install day that a 2.5-inch mobile home wall won’t accept them. The windows either protrude past the interior wall or get “adapted” with framing that leaves the jamb unsealed. Both outcomes fail.
- Fogged seals and oxidized aluminum frames. The combination of intense UV radiation and high humidity in South Florida accelerates seal failure on insulated glass units, especially on aluminum-framed windows. In a manufactured home, where the wall assembly is thinner and conducts more heat, that failure happens faster. Fogged glass isn’t a cosmetic issue; it’s a sign the unit’s insulating value is gone.
- Missing DHSMV compliance paperwork. A cheap impact window quote often omits the inspection and documentation step because it adds cost and time. The homeowner gets impact-rated glass but no proof that the installation meets mobile home wind-resistance standards. After a storm, the insurer asks for that documentation, doesn’t get it, and denies the claim. We’ve seen it happen.
Pricing for Impact Windows & Doors in Plantation Mobile Home Park, FL
Impact window replacement in Plantation Mobile Home Park typically runs $900 to $1,900 per opening, depending on the size, the wall depth, and whether the rough opening needs reframing. Impact sliding glass doors for a manufactured home usually land between $2,800 and $5,200 installed, with wider openings and reinforced tracks at the higher end. Impact entry doors run $1,800 to $3,600, including threshold flashing and hardware. Replacement of original jalousie windows with HUD-compliant impact-rated units costs more than a standard window swap, typically $1,100 to $2,400 per opening, because the rough opening usually requires re-framing and the units are custom-ordered. These are the ranges we quote in this community; the exact number depends on your unit’s wall depth, opening sizes, and the wind-load rating required for your section of the park. Estimates are free, and the number on the written quote is the number on the bill. Call (813) 320-9346 to schedule one.
We Also Serve Cities Near Plantation Mobile Home Park
Our team works in Plantation Mobile Home Park daily, and we regularly serve the surrounding communities of Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those areas and dealing with a manufactured home window or door issue, you’ll get the same mobile-home-specific expertise and the same written compliance documentation. See our full Impact Windows & Doors in Plantation Mobile Home Park service area details for what we cover and how quickly we can get to your street.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Plantation Mobile Home Park
Yes. Because Plantation Mobile Home Park is entirely HUD-code manufactured housing, impact windows and doors here must meet Florida DHSMV wind-resistance requirements for mobile homes, not the standard Florida Building Code that governs site-built construction. The DHSMV standard accounts for the lighter structure, thinner wall depth, and different anchoring system of a manufactured home. A window rated for a site-built house may not be legal or insurable in your unit. Call (813) 320-9346 and we’ll confirm the rating your specific home requires.
No. Current Florida mobile home rules do not allow replacing jalousie glass louvers in kind. A jalousie swap forces a full HUD-compliant window retrofit, which means measuring the existing rough openings, often re-framing them to accept a standard impact-rated unit, and installing custom-ordered windows with the proper wind-resistance documentation. It’s a bigger job than most homeowners expect, and it’s the only legal path forward. We quote the full retrofit honestly, with no surprises when the scope becomes clear.
A compliant quote includes the impact-rated window units sized to your actual rough openings and wall depth, mobile-home-specific flashing tape and sealant, any re-framing required to accept the new units, installation by background-checked technicians, and the DHSMV compliance documentation that proves the work meets mobile home wind-resistance standards. A cheap quote that omits the documentation or the flashing is not cheaper. It’s incomplete. Call (813) 320-9346 for a written quote that shows every line item.
Without documentation proving your impact windows meet Florida DHSMV wind-resistance requirements, your insurer has grounds to deny a claim for storm-related damage to the windows or adjacent structure. With documentation, you have proof the work was done to the standard the state requires for manufactured homes. We register both manufacturer warranty layers in writing and pull the DHSMV compliance paperwork for your file before the truck leaves the driveway. That’s the Keystone Standard, and it’s on every job we do in Plantation Mobile Home Park.
The combination of intense UV radiation, high humidity, and salt-tinged air in South Florida accelerates oxidation on aluminum frames and breaks down the sealant on insulated glass units faster than in central or northern Florida. In a manufactured home, the thinner wall assembly conducts more heat through the frame, which adds thermal stress to the seal. That’s why we recommend impact-rated vinyl or thermally-broken aluminum frames for manufactured homes in this area. They hold up longer in this climate. Call (813) 320-9346 for a free estimate on windows that won’t fog out in five years.
Call TruePane Windows & Doors in Plantation Mobile Home Park
If you live in Plantation Mobile Home Park and you’re tired of windows that fog, doors that bind, or quotes that don’t account for what a HUD-code manufactured home actually requires, call us. We’ll send a background-checked technician to measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the work starts. The 90-Day Done Right Promise means if it’s not done right, we make it right. No paperwork, no arguing. Call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park with mobile-home-specific impact window and door expertise.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.