Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Royal Palm Beach, FL | TruePane Windows & Doors
We provide independent CGI windows and doors service across Royal Palm Beach for homeowners whose original 1970s and 1980s openings have finally caught up with them. The work that sets our CGI service apart in this village comes down to one thing: we know which original Royal Palm Beach jalousie and single-track aluminum openings can accept a compliant CGI retrofit, and which need full rough-opening reconstruction before a wind-mitigation inspector will ever sign off. That means fewer surprise change orders, a cleaner permit path, and a job that clears inspection the first time. Call (813) 320-9346 for a free estimate on CGI windows and doors service in Royal Palm Beach.
Why Royal Palm Beach Residents Choose Us for CGI Service
We have worked on thousands of CGI openings across Palm Beach County, and the failures we see in Royal Palm Beach follow a pattern shaped by the village’s specific build history. These are CBS tract homes from the late 1960s through the mid-1990s, many still carrying original builder-grade aluminum and jalousie openings that were never meant to meet today’s wind-load code. We maintain a running spec library of CGI product approvals and rough-opening tolerances, which lets us engineer a compliant retrofit without being tied to any factory authorization. That independence matters when a 1974 Florida room needs a creative opening solution, not a catalog answer. CGI sales & service is what we do day in and day out, and Dale Kessler, our founder, has kept the same rule on the whiteboard since 2008: if the pane is not true, the job is not done. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway.
Common CGI Windows & Doors Problems We Solve in Royal Palm Beach
- Oxidized aluminum frames and pitted bottom rails on CGI sliders. Royal Palm Beach’s summer humidity stays relentless, with dew points above 75°F from June through September. Add lawn irrigation overspray hitting ground-level tracks, and the aluminum on older CGI sliders starts oxidizing and pitting faster than in drier inland markets. We strip, assess, and either re-seal salvageable frames or tell you straight when replacement is the honest call.
- Failed impact-glass seals and interior fogging on CGI casements. The near-daily afternoon thunderstorm cycle here means casement windows take repeated thermal shock. When an impact-glass seal fails, you get fog between the panes, and that fog is not just cosmetic; it means the insulating gas has escaped and the unit is no longer performing. We replace IG units with OEM CGI glass when factory lead times allow, or a proven aftermarket line when an older model is no longer stocked.
- Warped or misaligned CGI sliding door rollers. Sand and grit from village gutters gets tracked onto door tracks, grinding down rollers over years of daily use. A slider that drags or binds is usually a roller and track issue, not a door replacement. We rebuild tracks, replace worn rollers, and re-align the door so it closes square against the weatherstripping.
- Broken or stiff jalousie-turned-CGI conversions. Original Florida room openings in Royal Palm Beach homes from the 1970s were often undersized for standard impact inserts. When a previous partial conversion leaves a jalousie section that no longer opens or seals, the fix is usually a full opening rebuild with properly sized CGI impact glazing, not a hardware patch.
- Hollow-core sliding glass doors that fail wind-mitigation inspection. Many original Royal Palm Beach homes still have aluminum single-track sliders that were never impact-rated. Insurers now flag these as a reason for non-renewal, and the practical answer is usually a CGI ThermaLast or Sentinel slider replacement done to current Palm Beach County wind-load code.
CGI Service in Royal Palm Beach: What Local Conditions Mean for Your Equipment
Royal Palm Beach lies entirely outside the Coastal Construction Control Line, so homeowners here have long assumed they were sheltered from the worst of the wind requirements. That assumption is now costing people their insurance. The village sits just inside the western edge of Palm Beach County’s enhanced wind-borne debris region, which means impact-rated or protected openings are still mandatory, not optional. The jalousie window is the single biggest trigger. Wind-mitigation inspectors flagging Royal Palm Beach homes routinely cite the louvered glass windows left in original Florida rooms and secondary bedrooms of 1970s-era houses, because those openings have an effective wind rating of zero and cannot be made compliant with shutters alone. One flagged jalousie on an inspection report has been enough to push Citizens Property Insurance or a private carrier into a non-renewal decision. In the Saratoga at Royal Palm Beach subdivision off Crestwood Boulevard, we cut out a set of original jalousie windows in a 1974 CBS Florida room, rebuilt the rough openings to accept CGI Sentinel impact casements, and replaced a corroded aluminum sliding door with a CGI ThermaLast slider. The homeowner’s wind-mitigation inspection had flagged those louvered windows as the only reason for non-renewal, and after our permit-backed retrofit the re-inspection cleared with zero open items. That is the reality of CGI work in Royal Palm Beach: it is not a renovation choice, it is a coverage decision.
CGI Models & Products We Service in Royal Palm Beach
We service the full CGI residential line, including the Sentinel Series impact casement and sliding windows, the Estate Collection fixed and picture windows, the 900 Series single-hung and double-hung windows, and the ThermaLast sliding glass doors and French door systems. Our parts approach is straightforward: we prefer OEM CGI hardware and IG units when timing allows, but for older CGI models where factory lead times run past six weeks, we stock a proven aftermarket line so your Royal Palm Beach job does not stall. If you are outside the village, we also handle CGI service in Greenacres. If a frame is corroded through or the original installation predates current Palm Beach County wind-load code, we will tell you plainly that full replacement is the right call, because a patch will just fail the next wind-mitigation inspection.
CGI Service Pricing in Royal Palm Beach
CGI service pricing in Royal Palm Beach depends on what the opening needs. A simple roller rebuild or hardware replacement on an existing CGI slider runs on the lower end, usually a few hundred dollars including parts. Replacing a failed IG unit on a CGI casement runs higher because impact-rated glass is expensive, and a full jalousie-to-CGI Florida room conversion is a larger project that involves rough-opening reconstruction, new framing, impact glazing, and permit work. What you get with our free estimate is a written line-item quote, fixed pricing with no change orders, and both warranty layers registered in writing before we finish. If it needs to be in writing to be true, we will put it in writing. Call (813) 320-9346 to schedule your free estimate, and we will walk your openings with you.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs — CGI Windows & Doors in Royal Palm Beach
Because Royal Palm Beach sits inside Palm Beach County’s enhanced wind-borne debris region, even though it is outside the Coastal Construction Control Line, many homeowners also ask about CGI in West Palm Beach. Inspectors need to see documented proof that any replacement opening meets current impact or protected standards. A missing product approval number or an unregistered retrofit is treated the same as no upgrade at all. We register both warranty layers and keep your CGI product approvals on file. Call (813) 320-9346 if your inspection report came back with open items.
No. Jalousie windows have an effective wind rating of zero, and Palm Beach County standards do not allow shutters over a louvered opening to satisfy wind-mitigation requirements. The opening itself must be replaced with impact-rated glazing, and in most 1970s Royal Palm Beach Florida rooms that means full rough-opening reconstruction to accept properly sized CGI units.
Oxidized and pitted bottom rails from the combination of high humidity and irrigation overspray. The aluminum on ground-level tracks takes a beating here, and once pitting starts, the door no longer seals against weatherstripping. We can often rebuild or re-seal salvageable frames, but if the corrosion has gone through, replacement is the honest answer. Call (813) 320-9346 for an exact assessment and quote.
Most Royal Palm Beach HOAs have architectural review requirements for visible changes like window styles and door finishes. Nearby communities such as CGI repair in Palm Beach Gardens follow similar HOA processes. Some specify frame colors or profile styles that narrow the CGI model list. We are familiar with the review process in these planned subdivisions and can help you prepare the submittal package your HOA will want to see before approval.
When the original opening is undersized, out of square, or carries a jalousie frame that was never built to accept an impact insert, a full-frame replacement is the only way to get a compliant, watertight install. Insert windows rely on the existing frame being sound and square; in older Royal Palm Beach CBS homes, that is often not the case. We will show you the opening and explain which approach applies to your house before you spend a dollar.
Service Areas Near Royal Palm Beach
We provide CGI windows and doors service throughout the western Palm Beach County communities and beyond, including Wellington, Loxahatchee, The Acreage, Greenacres, and Lake Worth Beach. If you are in a neighboring community and need CGI service in Safety Harbor or CGI service in St. Cloud, our crews cover those areas as well. For everything closer to home, our Royal Palm Beach service area page has the full list of neighborhoods we work in regularly.
Book Your CGI Service in Royal Palm Beach Today
If your CGI windows or doors need service, or if a wind-mitigation inspection has put your insurance on the line, call (813) 320-9346. We also cover CGI repair in Wellington. We will schedule a free estimate, walk your openings, and give you a written line-item quote with no surprises. A live person answers the phone, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Royal Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.