CWS Windows & Doors in Fort Lauderdale, FL

CWS Windows & Doors in Fort Lauderdale, FL | TruePane Windows & Doors

We’re an independent CWS service provider working throughout Fort Lauderdale, and we repair, tune, and replace CWS windows and doors without manufacturer authorization. The one thing that separates CWS work here is the High-Velocity Hurricane Zone: Fort Lauderdale sits inside one of only two counties in the country where every replacement unit must carry a Miami-Dade Notice of Acceptance. No NOA, no permit. We handle that paperwork and the install, so you don’t get stuck mid-project with a window that can’t legally go in. Call (813) 320-9346 for a free estimate.

Call (813) 320-9346

Why Fort Lauderdale Residents Choose Us for CWS Service

We’ve spent years building a parts library and symptom database around CWS frame geometry and hardware wear. The 4500 single hungs and 6000 sliders are workhorses, but they don’t leave the factory tuned for brackish canal air and 75% humidity year-round. We see how they fail here, and we know which aftermarket substitutions hold up versus which ones will have you calling again in eighteen months. Dale Kessler founded TruePane in 2008 after spending his earlier years measuring and setting storm-rated windows across Florida, and the rule he keeps on the whiteboard still governs every CWS job we take: if the pane is not true, the job is not done. We are not a CWS dealer and we are not manufacturer-affiliated. We’re the crew Fort Lauderdale calls when a CWS unit needs to outlast the next storm season, not just make it to closing. See our full CWS sales & service approach.

Common CWS Windows & Doors Problems We Solve in Fort Lauderdale

• White oxidation and pitting at weep holes on aluminum frames. In canal-heavy neighborhoods like Rio Vista and Coral Ridge, brackish salt spray works into the extrusion and starts corroding from the inside out. Drainage fails, water pools in the track, and the frame degrades faster than the same CWS unit would west of I-95.
• Shrunken, hard EPDM weatherstripping on CWS 6000 sliding doors. Constant subtropical humidity dries and shrinks the seals, especially on east-facing units that catch afternoon thunderstorms. Wind-driven rain sneaks through the interlock and leaves water on the tile. We replace the seal and realign the interlock so it actually closes tight.
• Seized operator mechanisms on original CWS jalousie windows. Plenty of 1950s and 1960s CBS homes in Victoria Park and Colee Hammock still have them. Salt accumulation locks the crank solid. These windows cannot be impact-rated under current code, so if you’re pulling a permit, it’s full-frame replacement or nothing.
• Loose casement hinges on beach-corridor condos. CWS 8000 casements along the oceanfront corrode at the hinge points faster than the same model in western Broward. Sashes sag, latches miss, and a wind mitigation inspector will flag it on the spot. We rehang the sash or swap in marine-grade hardware as needed.
• Fogged or failed seals on CWS 9000 fixed picture windows. Salt aerosol attacks the sealant edge over time, and the result is condensation between the panes that no amount of wiping fixes. IGU replacement is usually the right call when the frame is still sound, and it costs less than a full tear-out.

CWS Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment

Here’s something most CWS owners don’t find out until the project stalls: Fort Lauderdale’s building department requires signed-and-sealed Florida PE shop drawings for most window and door replacement permits under HVHZ rules. That’s a step Boca Raton doesn’t impose the same way. A job that could be pulled over the counter there takes three to four weeks here before we can even order your CWS units. We work with a local PE directly, and we submit drawings the day we have measurements, because we know the review queue does not care about your hurricane deadline. On a recent Rio Vista canal home, our crew pulled a permit for an original CWS 6000 sliding door with salt pitting so deep the rollers were chewing through the bottom track. We documented the failure for the PE, ordered a new HVHZ-rated CWS 6000 with stainless rollers and upgraded interlock weatherstripping, and passed the city’s wind-load inspection the same week the hurricane shutters went up. That’s what it takes in Fort Lauderdale: paperwork, patience, and a crew that knows exactly what the inspector will be looking at. We handle all of it. If it needs to be in writing to be true, we will put it in writing.

CWS Models & Products We Service in Fort Lauderdale

We work on the full CWS residential line: 4500 single hung, 6000 sliding glass doors, 8000 casement and awning units, and 9000 fixed picture windows. For newer units still under warranty, we use OEM CWS hardware and seals so the original fit and coverage stay intact. For discontinued 4500 and 6000 parts that CWS no longer supplies, we substitute marine-grade stainless or powder-coated aftermarket equivalents built for brackish air. We keep common rollers, hinges, and weatherstripping stocked locally so most Fort Lauderdale service calls don’t wait on a parts shipment. If a frame extrusion is still structurally sound, we repair. Once the outer flange shows deep pitting or the weep system has failed, we’ll tell you straight: full-frame replacement with an HVHZ-approved CWS unit is the honest and cost-effective path.

CWS Service Pricing in Fort Lauderdale

FAQs - CWS Windows & Doors in Fort Lauderdale

Service Areas Near Fort Lauderdale

Alongside our Fort Lauderdale coverage, we run crews into the surrounding Broward and South Florida communities. We regularly service CWS windows and doors in Coral Ridge, Victoria Park, Rio Vista, and Colee Hammock, and we take calls from homeowners farther out who need the same HVHZ-compliant approach. Looking for a crew closer to the coast? See our Fort Lauderdale service area. If you’re up the coast, we have CWS service in Fort Pierce and CWS service in Glen Ridge as well.

Book Your CWS Service in Fort Lauderdale Today

When a CWS window or door fails in Fort Lauderdale, it fails in a coastal environment that punishes shortcuts. We don’t take them. Call (813) 320-9346, get a written estimate, and put the job in front of a crew that will still be here when you need the warranty honored. If the pane is not true, the job is not done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale since 2008.