Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in San Antonio, FL | TruePane Windows & Doors
We provide independent CWS windows and doors service throughout San Antonio, FL, for homeowners whose CWS units have been in place for decades or are going into new construction along the SR-52 corridor. Ask us about our Window Installation in San Antonio if you’re planning a new build or addition. What makes our CWS work here different is straightforward: San Antonio has 140-year-old wood-framed cottages and brand-new wind-rated subdivisions sometimes on the same road, and a CWS window behaves very differently in each. We handle both, from that first inspection to the final wind mitigation sign-off. Call (813) 320-9346 and a live person answers.
Why San Antonio Residents Choose Us for CWS Service
Dale Kessler grew up in Seminole Heights and learned glazing at Hillsborough Community College, spending more time on the shop floor than in a classroom. That suited him fine. For the better part of two decades he has measured, set, and sealed windows across the Tampa Bay area, and the work he is best known for is storm-rated installation done tight enough that a follow-up inspection is never a surprise. That is the standard our crews bring to every CWS job in San Antonio.
We are an independent CWS service provider, not a manufacturer affiliate or authorized dealer. That matters because we recommend what the house actually needs. If a CWS 8000 frame from 1985 has corroded corner keys, we will tell you to replace the frame instead of patching it. If a CWS 6000 vinyl slider just needs new weatherstripping, we will say that too. Our CWS sales & service work is built around honest assessment, and we carry OEM-compatible parts so most repairs in San Antonio happen in a single visit.
Common CWS Windows & Doors Problems We Solve in San Antonio
- Gaps between the CWS frame and the rough opening. In homes built before 1940, original pine subframes rot out invisibly behind the trim. The CWS frame loses support and starts pulling away. You will notice drafts or a window that suddenly won’t lock square. This is a full-frame repair in San Antonio, not a caulk job.
- Failed compression seals and clogged weep holes on CWS 6000 series vinyl sliders. Decades of Pasco County dust, heavy summer humidity, and monsoon rain clog the drainage channels. Water backs up, saturates the interior drywall, and rots the sill before you can see it from outside. We see this on mid-century ranch homes all over San Antonio.
- Pitted mullions and corroded corner keys on CWS 8000 aluminum frames. The 1980s tract homes in San Antonio trap moisture between the glass and the aluminum frame. Constant humidity pits the mullions, the corner keys corrode, and the frame’s structural integrity starts to fail. If the corrosion is caught early, we can sometimes rebuild the corner. More often, replacement is the square deal.
- Failed wind mitigation inspections on non-impact CWS units. Ranch-era additions often have original CWS aluminum frames that were never rated for Pasco County’s current design wind speeds. Homeowners find out when their insurance company sends the inspector. We replace those with impact-rated CWS product approvals that pass the inspection the first time.
- Fogged glass and failed seals on older CWS units. San Antonio’s intense UV exposure breaks down sealant faster than in drier climates. If the CWS unit is under 25 years old, we can often replace the insulated glass unit. Over 25 years, and we will walk you through full-frame replacement instead.
CWS Service in San Antonio: What Local Conditions Mean for Your Equipment
Here is something you will not read on a generic CWS service page. In San Antonio’s 1880s to 1910s historic colony core, many homes still have original wood-sash windows that predate any aluminum-framed CWS unit by seventy years or more. When CWS retrofits were attempted in the 1970s and 80s, installers often face-nailed the CWS frame directly into soft pine jambs. That practice leaves hidden voids behind the frame. It is structurally invisible until the trim comes off.
We pulled the interior trim on a 1912 wood-frame cottage off Michigan Avenue. The CWS 8000 single-hung had been “replaced” in 1985. Behind that trim, the original pine jamb was so hollowed by termite damage that the mounting flange was hanging on one screw. We rebuilt the rough opening with pressure-treated lumber, reflashed to current code, and set a new impact-rated CWS 9000 casement in the same opening. That homeowner had failed wind mitigation twice before. It passed on the first inspection after our crew finished. That is the difference between an estimate that assumes a square opening and a crew that knows what 140 years of Pasco County humidity does to pine.
What does this mean for CWS owners in San Antonio specifically? Two things. First, if your home sits in the old-town core, expect a full-frame inspection before any replacement window gets ordered. Second, if your home is new construction along the SR-52 growth corridor, your CWS units must meet Florida Building Code product-approval and wind-load requirements tied to Pasco County’s design wind speed maps. We know which CWS product lines clear that bar and which ones will not.
CWS Models & Products We Service in San Antonio
Our crews work on CWS 8000 Series aluminum single-hung, 9000 Series aluminum casement, 6000 Series horizontal slider, and 2000 Series vinyl single-hung units. We default to CWS OEM replacement parts for critical hardware like locks, balances, and pivots because those components are engineered to the original frame tolerances. For weatherstripping and fasteners, we use high-grade aftermarket rubber and stainless where they outperform aging OEM material.
For CWS units over 25 years old with frame corrosion or widespread seal failure, we will recommend full-frame replacement rather than part-by-part repair. We quote manufacturer lines side by side on paper, so you see exactly what you are buying before any work starts. If it needs to be in writing to be true, we will put it in writing.
CWS Service Pricing in San Antonio
CWS window and door service in San Antonio depends on the condition of the rough opening, the CWS model, and whether you need a repair or a full-frame replacement. A simple insulated glass unit replacement on a CWS 6000 slider will run far less than rebuilding a rotted rough opening in a 1910s cottage. When we quote, we give you a written line-item estimate before work begins. No surprise line items on the bill, no second appointment left hanging. To get an exact number for your CWS windows or doors, call (813) 320-9346. The estimate is free.
Serving San Antonio, FL - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs: CWS Windows & Doors in San Antonio
Because the original pine subframe behind the CWS unit is rotting or termite-hollowed, not the window itself. The glass can look perfect while the frame loses its grip on the rough opening. That is the exact issue we found on the Michigan Avenue cottage, and it is common in San Antonio’s pre-1940 homes. The fix is a full tear-out and rough-opening rebuild, not a caulk bead. Call (813) 320-9346 for an inspection and a straight answer.
Sometimes, yes. If the CWS frame is square, the corner keys are intact, and the mullions show no pitting, we can replace the insulated glass unit and get you another decade. If corrosion has set into the frame, you are better off replacing the whole unit. Replacing glass in a corroded CWS frame is spending money on a frame that has already failed. We will show you the difference on paper.
San Antonio sits inland, but Pasco County’s design wind speed maps still govern new construction and replacements. Non-impact CWS units on older additions often fail wind mitigation inspections, which affects your insurance. Impact-rated CWS product approvals are the difference between passing and failing that inspection. Whether you need them depends on your opening exposure and your insurer’s requirements. Talk to us before you order anything.
We rebuild the rough opening tight and set the new CWS unit flush, matching the sightlines of the original window where possible. In historic San Antonio homes, that usually means preserving the existing interior trim and casing. Exterior trim gets reflashed to current code. The goal is a window that performs like a modern CWS and looks like it belongs on the house. If it needs to be in writing to be true, we will put it in writing.
San Antonio’s dry-season dust and heavy summer rains create a constant slurry that blocks the narrow weep holes on CWS frames. Yes, it causes real damage. Blocked weep holes trap water in the track, and that water migrates into the wall cavity or interior drywall. We clear the drainage channels, replace failed compression seals, and if the sill has rotted, we address that too. Call (813) 320-9346 and we will take a look.
Service Areas Near San Antonio
Our CWS service work extends throughout San Antonio service area and into nearby communities. We regularly work in CWS service in Sanford, CWS service in Sea Ranch Lakes, and Acacia Villas. If you’re in one of those towns and your CWS windows need attention, call the same number.
Book Your CWS Service in San Antonio Today
Call (813) 320-9346 to schedule your free estimate. A live person answers, day or night. Tell us what your CWS windows are doing (or not doing), and we will set a time that works for you. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Antonio and Pasco County since 2008. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.