Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Bardmoor
Door installation in Bardmoor, FL usually costs between $900 and $4,800 depending on the opening and the rating the unit carries. Most standard entry door replacements here run $1,200 to $2,600, while impact-rated sliders on golf-course-facing rear elevations can reach $6,500 or more when custom spans and structural headers are involved. We serve every street in Bardmoor, from the fairway lots off Bardmoor Boulevard to the ranch homes tucked behind the country club. If you’re pricing a door that has to meet Pinellas County wind code, call (813) 320-9346 and we’ll walk you through exactly what a compliant quote includes.
Why TruePane Windows & Doors Is Bardmoor’s Preferred Door Installation Company
Bardmoor is a tightly concentrated 1970s and 1980s golf-course community, and we know the houses here the way a mechanic knows a specific engine. Virtually every home predates Florida’s post-2002 high-wind impact-glazing requirements, yet the entire neighborhood sits inside Pinellas County’s Wind-Borne Debris Region. That combination is why so many Bardmoor homeowners call us after an insurance non-renewal notice lands in the mailbox. We do not sell a door by the brochure. We measure the opening, check the header, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway.
Our crews have worked on more CBS block ranchers here than we can count. The masonry differs from wood-frame construction common in other parts of Florida, and a crew that does not know how to anchor a buck to concrete block will leave you with a door that racks and binds within one storm season. We do the work per Pinellas County structural code, every single time. Reviews from Bardmoor customers repeatedly mention the same thing: the crew showed up when they said they would, the quote did not change, and the inspector signed off on the first pass. That is the standard, not the exception.
The Keystone Standard governs every job we do. That means both manufacturer warranty layers registered in writing, durations stated, plus our 90-Day Done Right Promise. If something is not right, we make it right. No paperwork fights, no arguing. Dale Kessler founded this company on a simple rule: if the pane is not true, the job is not done. That rule applies to every door we set in Bardmoor.
Our Door Installation Services in Bardmoor
The homes in Bardmoor demand specific door types more than others. These are the four we install most often here, and each one has its own relationship to wind load, CBS anchorage, and Pinellas permitting.
Entry & Swing Doors
An entry door on a Bardmoor CBS home is a code liability if it is not impact-rated. Tempered glass does not pass structural inspection as a wind-borne debris barrier, regardless of what a handyman might tell you. We install fiberglass, steel, and wood entry systems that carry Florida Product Approval or Miami-Dade NOA listings, with proper masonry anchoring to the block. A standard single entry door swap in Bardmoor typically runs $1,200 to $2,600 installed, depending on the slab and hardware.
Double & French Doors
French doors on the rear elevation of a Bardmoor rancher are common, and the original units were never meant to stop a 130-mph design wind. The difference is in the hardware and the engineering: a compliant French door set here needs a heavy-duty astragal, multi-point locking, and impact glazing in both leaves. We measure every opening twice, and we never reuse a rotted wood buck on a project where the new unit has to carry a product approval listing. Typical French door replacement in Bardmoor runs $3,200 to $6,000 on the rear elevation.
Bifold & Folding Doors
Bifold and folding doors work well on Florida rooms and patio transitions, but in Bardmoor they raise a hard question: can the opening actually be protected? A true impact-rated folding door is a custom-order product with a steel-reinforced track header, and it costs significantly more than a standard patio slider. We will tell you honestly whether a folding door makes sense for your opening or whether a wide-span impact slider serves the same purpose for less money. Custom folding door installs in Bardmoor start around $5,500 and climb based on panel count and finish.
Pivot Doors
A pivot door is a statement piece, and on a Bardmoor golf-course home it usually goes on the front elevation. The full-height pivot hinge carries a lot of weight, and in a wind zone like this one, the frame has to be back-bedded into masonry with anchors that match the engineering. Pivot doors are almost always custom-ordered to the rough opening, so lead times run four to six weeks, and the door itself starts around $4,000 before installation. The installation part is where the cheap bid goes wrong; this is not a door a general handyman should hang.
Trusted Brands We Service in Bardmoor
We are an authorized installer for more than a dozen manufacturer lines, and when we quote a door for a Bardmoor home we put the options side by side on paper so you can see the price difference and the performance difference in the same place. We frequently recommend Andersen for wide-span sliders on concrete block, PGT for impact-rated entry systems here in Pinellas, and ES Windows when a homeowner wants a high-end aluminum look that still carries Miami-Dade approval. The brand matters less than the listing and the install; a good door set poorly fails just as fast as a cheap door. We keep common hardware and seal components on our trucks serving the Bardmoor area, which means service calls do not turn into two-week waits for a part that could have been on the truck.
Common Door Installation Problems We See in Bardmoor Homes
After years of doing this work, the patterns in Bardmoor are clear. Here is what we see most often, and what it means for a homeowner.
- Corroded aluminum frames on original sliders. Salt-laden air from the Gulf reaches well inland on a narrow peninsula like Pinellas, and a 1970s aluminum frame that has been breathing that air for 40 years will oxidize at the corners and fail at the seal. The fix is a full replacement, not a patch, because the frame itself has lost structural integrity.
- Fogged glass and failed seals on golf-course-facing doors. The argon between the panes leaks out over time, and when the seal goes, the glass fogs and the insulating value drops to almost nothing. On an original 16-foot slider the energy loss is enormous, and the only real repair is replacement with a fusion-welded frame and fresh glazing.
- Doors that bind and rack within the first year after a cheap install. A replacement jamb back-bedded into exterior block without masonry anchors will shift under wind load, and the sash will start to catch. We have pulled out a dozen of these in Bardmoor in the last few years. The anchor detail is what separates a door that works for 30 years from one that fights you every July.
- Oversized rough openings with no structural header assessment. The original 12-to-16-foot sliders on Bardmoor’s rear elevations were installed as a selling point in the 1970s, but the headers over those spans were not always engineered for modern impact units. When you put a heavier, stiffer door into that opening without checking the header, the door flexes under wind load and cracks the stucco surround. We check the header before we order the unit, every time.
Pricing for Door Installation in Bardmoor, FL
A standard entry door swap in Bardmoor runs $1,200 to $2,600 with the slab, hardware, masonry anchors, and compliant installation. A French or double door set on a rear elevation runs $3,200 to $6,000 when both leaves are impact-rated and the buck is replaced. A wide-span impact slider, the kind that replaces those original 16-foot aluminum units, runs $4,500 to $8,500 depending on span and finish. Bifold and folding doors start around $5,500. The elements that move the price are span width, product approval type, whether the head has to be reinforced, and whether the existing buck is reusable. We quote fixed prices in writing, with no change orders hiding behind the estimate. Call (813) 320-9346 and we will give you a line-item number for your specific opening. Estimates are free.
We Also Serve Cities Near Bardmoor
Our crews serve the full Pinellas County peninsula and select nearby communities. If you are in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, you are within our normal service range and the same product approvals and code requirements apply. For a closer look at how we work in your neighborhood, see Door Installation in Bardmoor and our full service footprint.
Serving Bardmoor, FL - Our Local Coverage Area
We’re based in the Bardmoor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Bardmoor
Yes, a new exterior door in Bardmoor must be impact-rated. The home sits inside Pinellas County’s Wind-Borne Debris Region with a 130-mph design wind speed, and the county building department will not sign off on a replacement exterior opening that lacks a Florida Product Approval or Miami-Dade Notice of Acceptance listing. Tempered glass is not a substitute; it breaks under impact and the interior protection layer is gone. The permit requires the product approval documentation, and the inspector checks the door against that listing. Call (813) 320-9346 for a quote on a compliant unit for your specific opening.
Both are accepted in Bardmoor, but they come from different testing programs. A Florida Product Approval, often marked FL#, is the state-level approval issued for products that pass wind-load and impact testing under the Florida Building Code. A Miami-Dade NOA, or Notice of Acceptance, is the older and often stricter county-level approval that many insurance carriers still ask for by name in Pinellas. In practical terms, either listing gets you through a Bardmoor structural inspection; what matters is that the exact model and size you buy appears on that listing. We pull the approval document before we write the quote, so there is no surprise at inspection. Call (813) 320-9346 and we will show you the listing for the door you are considering.
It is the difference between a covered structural claim and a fight. Insurers in Pinellas County are actively non-renewing or surcharging homeowners whose openings lack documented impact ratings. When a storm comes through, the carrier will ask for proof that your openings met the wind code at the time of the loss. If we installed the door, we keep a job file with the permit, the product approval listing, and both warranty registration layers in writing, and we can produce that file on request. That documentation protects the claim. A door bought from a cash-and-carry installer with no permit and no listing leaves you holding the damage and the deductible increase.
The original aluminum sliders on Bardmoor’s 1970s homes used older glazing technology with a limited seal life, and the environment here works against them. The salt-laden air that moves across the Pinellas peninsula accelerates oxidation on the aluminum frames, which stresses the seal, and once moisture enters the air space between the panes, the argon leaks out and the glass fogs permanently. A 40-year-old slider with a fogged pane is done; no repair restores the insulating value. The replacement is a fusion-welded frame impact slider with new glazing, and we order it to your exact rough opening. Call (813) 320-9346 if you are looking at a fogged rear slider and want a real number for replacement.
Sometimes, but not always, and we will not tell you it is fine just to save a line item. The buck is the wood or metal frame that anchors the door into the concrete block, and on a 1970s Bardmoor home it has been exposed to decades of Florida moisture and salt air. If the buck is rotten, twisted, or undersized for the heavier impact unit, it gets replaced and re-anchored to the CBS block with masonry anchors per Pinellas code. On one golf-course-facing rancher off Bardmoor Boulevard, we pulled a corroded 16-foot original slider that had lost its seal, and the buck behind it was too far gone to save. We re-flashed the rough opening, anchored a new buck, and the inspector signed off without a correction. That is how the work gets done.
Call TruePane for Door Installation in Bardmoor
If you are in Bardmoor and the door you have is not rated for the wind zone it sits in, the time to deal with it is before the next storm season or non-renewal letter. We will measure the opening, pull the product approval listing that applies to your home, quote the door side by side with the alternatives on paper, and give you a fixed price in writing. A live person answers the phone 24 hours a day, 7 days a week, not a voicemail tree and not a callback form. Call (813) 320-9346 to schedule your free estimate. We have been doing this for years, and we plan to be here in 30 more.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Bardmoor and Pinellas County with compliant door installation done right the first time.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.