Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Windows & Doors in Sunrise, FL | TruePane Windows & Doors
We provide independent Andersen windows and doors service across Sunrise, FL. We are not a manufacturer-authorized dealer, which means we work for you, not a corporate quota. The thing that makes our Andersen work different here is simple: Sunrise sits inside Broward County’s High Velocity Hurricane Zone, and most original Andersen units in this city were never built to meet that code. If you have an older Andersen Perma-Shield sliding door or a jalousie window in a Sunrise Lakes condo, the repair conversation usually ends with a full impact-rated replacement. Call (813) 320-9346 and we’ll tell you straight what your units need.
Why Sunrise Residents Choose Us for Andersen Service
Dale Kessler grew up in Seminole Heights when it was bungalows and screen porches, and he’s been measuring, setting, and sealing windows and doors across Florida for the better part of two decades. The crews he sends into Sunrise work on Andersen’s wood-clad, vinyl-clad, and storm-resistant product lines daily, from 1960s Perma-Shield gliding doors to current E-Series and 400 Series casements. That hands-on familiarity means we know the exact mechanical and sealing weaknesses of each generation without any manufacturer affiliation coloring the advice.
We’re an independent Andersen service provider. When we tell you a frame is worth repairing, it’s because the frame is worth repairing. When we tell you it’s not, it’s because we’ve seen that failure mode play out a hundred times in Sunrise’s salt air and humidity. We carry genuine Andersen glazing, weatherstripping, and hardware for units that have life left in them, and we quote factory-equivalent glass and custom weatherstripping where the frame is sound but the original parts are obsolete. A live person answers the phone 24 hours a day, seven days a week. That’s been the standard since 2008 of community service.
Common Andersen Windows & Doors Problems We Solve in Sunrise
- Perma-Shield cladding pitting and oxidation. Decades in Sunrise’s salt-laden coastal air cause the aluminum cladding on older Andersen Perma-Shield frames and sashes to pit, oxidize, and eventually detach from the wood core at the bottom corners. Once that cladding lifts, water gets behind it and the frame starts to rot from the inside out.
- Failed insulated glass seals on E-Series and 400 Series units. Sunrise’s year-round high humidity and intense UV exposure accelerate seal failure in Andersen insulated glass. We regularly see E-Series and 400 Series windows in Sunrise homes showing condensation and film clouding between panes within 15 to 20 years of installation, far earlier than the same units would fail in a drier climate.
- Sagging rollers and worn weatherstripping on original wood-framed Andersen sliding doors. Low-rise Sunrise condos built in the 1970s and 1980s often still have original Andersen wood-framed sliding doors. The rollers sag, the weatherstripping compresses, and during Broward County’s summer downpours, air and water push right past the seals.
- Jammed jalousie mechanical operators on older Andersen storm doors. Andersen storm doors with jalousie louvers use mechanical operators that seize up after years of humidity and salt exposure. The replacement parts are no longer made, and these doors cannot meet HVHZ requirements anyway. Full replacement with an NOA-approved door is the only legal path.
- Original single-pane aluminum windows in 1960s CBS tract homes. Many Sunrise homes built between roughly 1965 and 1980 still have their original single-pane aluminum windows, some of them Andersen units from that era. These were never impact-rated, and every permitted replacement in Sunrise must carry a Miami-Dade Notice of Acceptance. That’s a full-unit replacement, not a glass swap.
Andersen Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise is unique in Broward County because so many 1970s and 1980s condo and townhome communities along the Pine Island Road and Nob Hill Road corridors still have original jalousie or louvered windows in secondary bedrooms and bathrooms. Here’s the hard truth about those units: jalousie windows cannot be repaired or retrofitted into HVHZ compliance. The louvered glass design simply cannot hold a structural rating, and there is no Miami-Dade NOA for any jalousie product. That means every single one of those service calls becomes a full impact window replacement rather than a repair. We see this pattern constantly at Sunrise Lakes, where a homeowner calls about a fogged pane or a jammed crank, and the honest answer is that the entire opening needs a new NOA-approved impact unit. It’s not an upsell. It’s the building code, and it applies to every permitted replacement in this city. If the pane is not true, the job is not done, and a jalousie pane in Sunrise can never be true under current law.
Andersen Models & Products We Service in Sunrise
Our field crews work on the full Andersen lineup: 400 Series, E-Series, A-Series, and Perma-Shield. For repair work on Sunrise homes, we prioritize genuine Andersen glazing, weatherstripping, and hardware when a repair will reliably last another five years. On frames that have reached 20-plus years of sun and salt exposure, we recommend full-unit replacement instead of chasing seal failures and pitted cladding, because chasing is what the last contractor did and that’s why you’re calling us now. For older Perma-Shield and storm door units with obsolete parts, we use factory-equivalent glass and custom weatherstripping where the frame is sound. We stock common Andersen hardware and weatherstripping profiles for fast turnaround across Sunrise, and oddball parts get ordered the same day we diagnose.
Andersen Service Pricing in Sunrise
Andersen service pricing in Sunrise depends on what you’re dealing with. A weatherstripping replacement or roller adjustment on a 400 Series sliding door runs a different number than a full impact-rated replacement on a Perma-Shield unit that’s failed structurally. What drives the cost most is whether the frame is sound enough to repair or whether Sunrise’s HVHZ code requires a full NOA-approved replacement. Every estimate includes a written line-item quote, both warranty layers registered in writing if we install new product, and our 90-Day Done Right Promise on the workmanship. No surprise line items appear on the bill after the fact. Call (813) 320-9346 for an exact quote, and we’ll measure every opening twice before we quote you a dollar.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Sunrise
No. Jalousie windows cannot be repaired or retrofitted to meet Sunrise’s HVHZ code requirements, and no Miami-Dade Notice of Acceptance exists for any jalousie product. Every permitted replacement in this city requires a fully impact-rated, NOA-approved unit. If you have original jalousies in a Sunrise Lakes condo or a 1970s townhome off Nob Hill Road, plan on full replacement. Call (813) 320-9346 and we’ll confirm what your specific openings need.
Andersen’s impact-rated lines hold up well in Sunrise’s salt air, provided the frames are maintained and the weep holes stay clear. The bigger variable is the generation of the unit. Older Andersen Perma-Shield frames from the 1980s and 1990s pit and oxidize noticeably faster in this climate than the current 400 Series and E-Series products, which use different cladding chemistry. If you’re comparing brands, we’ll quote Andersen side by side with other NOA-approved lines on paper so you can see exactly what you’re buying.
It should raise them. Impact-rated units with Miami-Dade NOA documentation typically strengthen your wind mitigation inspection report, which can reduce your windstorm insurance premium. The key is documentation: your insurer needs the NOA number and proof that the installation followed the manufacturer’s anchoring schedule. That’s part of our Keystone Standard. If it needs to be in writing to be true, we will put it in writing, and we register both warranty layers before the truck leaves your driveway.
Rarely. Minor surface oxidation can sometimes be cleaned and sealed, but once the cladding has lifted from the wood core at the bottom corners, water has already gotten behind it and the frame is compromised. In Sunrise’s humidity, that hidden rot spreads fast. We’ll tell you honestly whether a repair will last another five years. On most Perma-Shield frames that have seen 20-plus years of salt air, the honest recommendation is replacement. Call (813) 320-9346 for a straight assessment.
New Andersen storm doors can be installed in Sunrise if they carry the required Miami-Dade NOA for the product and the installation meets HVHZ anchoring standards. The problem is older Andersen storm doors with jalousie louvers and mechanical operators. Those cannot be brought into compliance, and the repair parts are no longer manufactured. If your Sunrise home or condo has one of those, it’s a replacement, not a repair. We’ll quote you an NOA-approved door that matches the building’s look.
Service Areas Near Sunrise
Our crews run Andersen service calls throughout the Sunrise area and into nearby communities, including Acacia Villas, Alafaya, Altamonte Springs, Apollo Beach, and Anna Maria. For neighbors just south and west of Sunrise, we also offer dedicated Andersen service in Surfside and Andersen service in Sweetwater. If you’re in Sunrise proper, you’re already in our Sunrise service area. For the full picture of what we do with the brand, see our Andersen sales & service page.
Book Your Andersen Service in Sunrise Today
If your Andersen windows or doors are binding, fogging, pitting, or leaking, call us at (813) 320-9346. We’ll send a background-checked, uniformed technician who measures twice, explains what he finds in plain language, and gives you a written quote before any work begins. Estimates are free. If the pane is not true, the job is not done, and we don’t leave Sunrise until it is.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.