Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Sunrise
A door installation in Sunrise, FL typically runs $1,800-$6,400 depending on the opening, the product, and whether the permit triggers full HVHZ compliance upgrades. Most Sunrise homes we work on were built between 1965 and 1990, and their original doors were never designed for the wind loads this city actually sees. That matters more here than almost anywhere else in Broward. If you’re replacing an entry door, a slider, or a jalousie unit in Sunrise, you need a crew that understands what the inspector will look for before the wall gets opened, not after. Call (813) 320-9346 and we’ll walk you through it.
Our team measures every opening twice, pulls the correct permit, and writes the quote so you see exactly which NOA-rated assembly you’re buying. No vague line items. No “we’ll figure it out on site.” Dawn from the Pine Island Road corridor called us about a sagging front door last spring; she had a written quote in hand the same afternoon and a permitted install scheduled that week.
Why TruePane Windows & Doors Is Sunrise’s Preferred Door Installation Company
We’ve been doing this work long enough to know that Sunrise is not Plantation, and it’s certainly not Davie. The HVHZ designation changes everything about what gets installed and how. Homeowners here have learned the hard way that a door bought at a big-box store and hung by a handyman will not pass a Broward County inspection. Dale Kessler founded this company on a straightforward rule: if the pane is not true, the job is not done. That applies to every hinge, anchor, and piece of flashing on a Sunrise door job.
Our techs are background-checked and uniformed, and they arrive when they say they will. We quote manufacturer lines side by side on paper so you can see the difference between a PGT impact-rated entry system and a conventional Andersen unit before you spend a dollar. Both warranty layers get registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s not optional on any job we do in Sunrise.
Homeowners here tend to have lived in their houses for twenty years or more. They remember the contractor who left them with a door that binds in July and a seal that fogged by Thanksgiving. We plan to be in Sunrise in thirty years, which is why a live person answers the phone 24 hours a day. Not a voicemail tree. Not a callback form. Call (813) 320-9346 and you’ll talk to a person who knows this city’s code requirements.
Our Door Installation Services in Sunrise
Entry & Swing Doors
A front entry door replacement in Sunrise almost always triggers a full opening inspection, because the entire assembly, not just the slab, must meet HVHZ uplift standards. We routinely find original 1970s wooden bucks that have rotted at the base from decades of humidity and storm-driven rain. Our crew splices in pressure-treated jamb stock, upgrades the anchors to current code, and hangs the new door so it clears the threshold in July when the humidity makes everything swell. Most entry door installs in Sunrise run $2,200-$4,800.
Double & French Doors
French doors are popular in Sunrise’s lakefront ranch homes and low-rise condo conversions, but the original units from the 1980s were rarely impact-rated. When we pull a corroded aluminum slider near Nob Hill Road, we often find the rough opening has no flashing tape at all. Water has been wicking into the jamb for decades. We reframe the buck with treated lumber, install a fully NOA-approved French door with impact-rated glazing, and flash the sill before the re-inspection happens, sometimes the same afternoon. Expect $3,400-$7,200 for a quality Double or French door installation in Sunrise with all permitting included.
Storm Doors
Storm doors serve a real function in Sunrise, not just a decorative one. They protect your primary entry door from direct UV and salt-laden air, which is why aluminum storm doors here pit and oxidize noticeably faster than they do in Central Florida. We install storm doors that carry their own NOA approval where required and that are sized to handle the wind exposure common to homes along Pine Island Road and the western subdivisions. A decent storm door installation in Sunrise runs $900-$1,800.
Pivot Doors
Pivot doors are catching on in Sunrise’s newer custom builds and full remodels, particularly in the communities near Sawgrass Mills and the western edges of the city. These are heavy assemblies, and a pivot hinge system needs to be spec’d for the wind pressures Sunrise actually sees. We quote pivot door systems from manufacturers that publish HVHZ test data, and we insist on a structural review of the header before we order anything. Pivot door installations in Sunrise start around $4,500 and climb depending on size and finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We’re an authorized installer for more than a dozen manufacturer lines, and for Sunrise homeowners we most often quote Andersen, Pella, and PGT side by side on paper. Andersen and Pella make excellent conventional door systems, but in Sunrise the conversation almost always turns to impact-rated product, and that’s where PGT and similar Florida-specific manufacturers lead. We register both warranty layers in writing before we leave the driveway, and if a part fails under warranty we handle the claim ourselves. We also stock common door hardware and weatherstripping for Sunrise-area homes, which means a return trip for an adjustment is usually quick, not a three-week wait on a regional warehouse.
Common Door Installation Problems We See in Sunrise Homes
- Non-NOA units installed as like-for-like swaps. A door gets replaced without a permit, the owner tries to sell, and the CO inspection flags the unit. The fix is a full tear-out and reframe at two to three times the original cost. We’ve seen this multiple times in Sunrise’s 1970s condo communities.
- Jalousie doors “repaired” instead of replaced. Older Sunrise condos, especially along the Pine Island Road and Nob Hill Road corridors, still have jalousie or louvered doors in secondary bedrooms and bathrooms. New louver clips do not bring those openings into HVHZ compliance, and they usually fail wind and water tests after the first summer storm.
- Rotted original wood bucks under hinged doors. The concrete block homes here were built with wood blocking around door openings, and after fifty years of humidity that blocking is often gone at the base. A new impact-rated door hung on a rotted buck will sag within a year because the anchors were never upgraded.
- Corroded aluminum frames and broken seals. Salt-laden air and year-round UV accelerate seal failure in older insulated glass units and cause aluminum frames to pit. A fogged door lite isn’t just unsightly; it usually means the unit has lost its insulating gas and is not performing to spec.
Pricing for Door Installation in Sunrise, FL
We Also Serve Cities Near Sunrise
TruePane serves Sunrise and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re outside the immediate Sunrise area, reach out anyway. Our scheduling covers the wider region, and our Door Installation crews are familiar with the local code quirks in each of these markets. Learn more about our service area on the Door Installation in Sunrise page.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Sunrise
Why does a door replacement in Sunrise require a Miami-Dade NOA, but the same job in Davie might not?
Sunrise falls entirely within Broward County’s High Velocity Hurricane Zone, the same ultra-strict designation as Miami-Dade, so every permitted door replacement must carry a Miami-Dade Notice of Acceptance on the entire assembly, not just the glass. Davie sits outside the HVHZ line, which is why the same product that passes in Davie may be rejected in Sunrise. Call (813) 320-9346 and we’ll tell you exactly which units will pass a Sunrise inspection.
My Sunrise condo was built in 1979 with jalousie doors in the bathroom - can those be repaired instead of replaced to pass an inspection?
No. Jalousie frames cannot be retrofitted or repaired into HVHZ compliance. The louvered design fails wind and water intrusion tests regardless of how many new clips or gaskets you install. We replace them with fully NOA-approved units sized for the opening, and we handle the association paperwork that older Sunrise condo communities often require before work begins.
What hidden code upgrades does a Sunrise door permit trigger once you open the wall?
In Sunrise, a door permit usually triggers an inspection of the rough opening, the frame anchors, the hinges, and the flashing, because the entire assembly must meet HVHZ uplift and missile-impact standards. If the original wood buck is rotted, we price the reframe before we cut. If the header is undersized, we price the upgrade. Those are not surprises; they are written allowances in your contract, approved in writing before we proceed.
Do I need a permit to replace a sliding glass door with French doors in Sunrise?
Yes. A like-for-like slider replacement still requires a permit, and converting a slider opening to French doors changes the structural load path, which means the inspector will look at the header, the anchors, and the flashing. We pull the permit ourselves, and we write the inspection schedule into your quote so you know the timeline before we start.
Why do the door frames on my Sunrise home pit and corrode faster than in Orlando?
Sunrise sits in Broward County’s coastal humidity band, and the salt-laden air plus year-round UV exposure accelerates oxidation on aluminum door frames and breaks down older insulated glass seals much faster than in Central Florida cities like Orlando, which sit a hundred miles inland. That’s why we recommend marine-grade finishes and impact-rated glazing on every Sunrise door we install, not just the ones facing east.
Call TruePane for a Free Door Installation Estimate in Sunrise
If you live in Sunrise and you’re tired of a door that binds, leaks, or fails to close square, call us. We’ll send a background-checked, uniformed technician to your home, measure the opening twice, and put a written line-item quote in your hand. Every job is covered by the 90-Day Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers are registered in writing before our truck leaves your driveway. A live person answers the phone 24 hours a day, 7 days a week. Call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.