Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Sweetwater
Custom window and door work in Sweetwater is not a matter of picking a style out of a catalog. It is a matter of matching the right product to a concrete block and stucco home built tight to the lot line, in a hurricane zone that rejects anything without the right paperwork. A custom window or door quote in Sweetwater typically runs from $1,800 to $7,500 depending on size, glazing, and whether the opening carries a Miami-Dade NOA. We work these streets every week, so the answer that comes back to you on the phone at (813) 320-9346 is already grounded in Sweetwater’s real conditions, not a generic sales script.
TruePane Windows & Doors has built its name on the principle that an out-of-true install is worse than no install at all. Custom Windows & Doors is what we do, and the standard does not change once the truck crosses into Sweetwater. If the pane is not true, the job is not done. That rule came from Dale Kessler, our founder, and it still governs every opening we set.
Why TruePane Windows & Doors Is Sweetwater’s Preferred Custom Windows & Doors Company
We earn work in Sweetwater the slow way. A neighbor watches one of our crews set a custom impact casement on SW 109th Avenue, sees the flashing tape go on before the frame, sees the street left clean at the end of the day, and the phone rings a week later. That is how most of our Sweetwater customers find us. Background-checked, uniformed technicians show up on time, measure every opening twice, and put side-by-side quotes on paper so you see exactly what you are buying before a single dollar changes hands.
Dale Kessler founded TruePane in 2008, but the craft behind it goes back many years. We are not a franchise playbook operating out of a regional call center. A live person answers our phone 24 hours a day, 7 days a week. That matters when a Sweetwater afternoon storm blows a window out and you need to speak to someone who actually knows the difference between a FL# and an NOA stamp. Dispatch and scheduling for our Sweetwater crews are coordinated from our Miami metro office, and the trucks are on the road in this part of the county most days.
Every job carries the 90-Day Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. If something is not right within 90 days, we make it right. No paperwork fight, no arguing, no fine print that covers neither side.
Our Custom Windows & Doors Services in Sweetwater
Dense CBS construction and zero-lot-line siting shape most custom work in Sweetwater. We plan each job around access first, because a window that cannot be staged safely on a shared driveway is a window that does not get installed cleanly. Here are the services we handle most in this part of the county.
Custom Shape Windows
Sweetwater homes from the late 1970s through the early 1990s sometimes framed in arch-top and radius openings as a design touch, and most of those openings are now filled with failing original aluminum. We build replacement custom shape windows to the rough opening, not the nearest stock size. On a CBS wall, that means templating the existing buck frame before the old unit comes out, so the new radius matches the stucco line exactly. A radius or arch replacement in Sweetwater typically runs $2,200 to $5,800 depending on span and impact rating.

Commercial Storefront Glazing
Sweetwater’s commercial strips along SW 8th Street and the side streets off 107th Avenue run a mix of storefront systems, many of them original aluminum set before current code. We replace storefront glass and framing with fully tempered glazing that carries a Miami-Dade NOA, which is the only thing a Sweetwater inspector will accept on a commercial replacement. Storefront work runs on a different clock than residential, and we typically schedule around the business’s hours to avoid shutting down a register line.

Curtain Wall Systems
Low-rise apartment buildings and small office conversions in Sweetwater sometimes call for curtain wall replacement rather than punched window swaps. We quote curtain wall systems with the same NOA verification step we use on a single casement. Given the humidity coming off the Everglades, we pay particular attention to thermal break condition and gasket seating, because a curtain wall with a failed interior gasket in this climate will condense on the mullion and stain the drywall inside a year. Curtain wall work in Sweetwater starts around $85 per square foot and rises with glass weight and access difficulty.

Architectural Grilles & SDLs
Sweetwater has a distinct architectural character, and many homeowners want to keep the visual rhythm of their original windows while gaining impact protection and real seals. Simulated divided lites with a true spacer bar read like the old divided sash, and we order them to match the existing lite pattern so the house does not lose its face. SDLs on impact-rated laminated glass are standard practice here, and the cost of adding a grille pattern typically runs $120 to $450 per sash above the base window price.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sweetwater
We are an authorized installer for more than a dozen manufacturer lines, and in Sweetwater we most often quote PGT, CGI, and Simonton because these lines maintain current Miami-Dade NOA listings on the sizes and configurations this market needs. We stock common replacement parts for these brands, so a failed balance on a PGT sash does not mean a two-week wait. A live person answers our phone at (813) 320-9346, and we can usually tell you within one call whether your existing unit is worth rebuilding or better replaced.
Common Custom Windows & Doors Problems We See in Sweetwater Homes
- NOA paperwork gaps. The most common failure we clean up after in Sweetwater is a window or door installed with a Florida Product Approval but no Miami-Dade NOA. The permit got rejected, the old unit was already out, and the homeowner was left holding a non-approvable product. We verify the NOA before we quote, not after.
- Jalousie glass fatigue and frame rot. Original louvered jalousies from the 1970s and 1980s oxidize at the hinge points and lose their seal strips. In Sweetwater’s humidity, the glass fogs permanently and the aluminum frames develop white corrosion that no cleaning will fix.
- Zero-lot-line staging failure. A crew that shows up to a Sweetwater lot with no driveway and a shared wall will block a neighbor’s access if they have not planned staging. We walk the site ahead of time, coordinate with the attached neighbor, and keep the shared driveway clear.
- Wet-season flashing shortcuts. June through October brings daily downpours, and a rough opening left exposed for even one afternoon absorbs water into the CBS block. We stage flashing work so the opening is dried in before forecast rain, and we tape the sill pan before the frame goes in.
Pricing for Custom Windows & Doors in Sweetwater, FL
Custom window and door pricing in Sweetwater runs on a few hard variables: size, glass package, NOA status, and access. A standard custom casement in an impact-rated package typically runs $1,800 to $3,400 installed. A radius or arch custom window lands between $2,200 and $5,800. A full custom sliding glass door with impact glazing starts around $4,500 and can reach $8,500 or more on an oversized opening. A single custom fixed picture window with HVHZ-rated frame and laminated glass usually runs $1,600 to $4,200 depending on square footage.
We put a written line-item quote in front of you before work begins, and the price on that sheet is the price on the final invoice. No change orders for work we should have seen coming. Call (813) 320-9346 to schedule a free estimate, and we will walk your openings, check the NOA status, and tell you straight what it costs.
We Also Serve Cities Near Sweetwater
Our crews work throughout western Miami-Dade, and we regularly take calls from homeowners in Sweetwater as well as Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those neighboring communities, the same NOA-first discipline and the same 90-Day Done Right Promise apply. Call (813) 320-9346 and we’ll route the right crew to you.
Serving Sweetwater, FL - Our Local Coverage Area
We’re based in the Sweetwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Sweetwater
Sweetwater sits inside Miami-Dade County’s High Velocity Hurricane Zone, and the county requires a Miami-Dade County Notice of Acceptance, not just a Florida Product Approval. A FL# alone will not satisfy a Sweetwater inspector, even if the product is legal in most of the rest of Florida. The fix is to re-order with an NOA-listed product, which is why we verify the NOA before we quote anything in this market. Call (813) 320-9346 and we can check your spec before you spend more money.
Yes. We remove the old jalousie frame down to the rough opening, install a custom-sized impact-rated window with a fusion-welded frame rated for HVHZ, and flash the opening so the CBS block stays dry. The width of the original jalousie bay often requires a custom build, and we quote it that way. This is one of the most common retrofits we do in Sweetwater.
Sweetwater enforces municipal noise and work-hour ordinances that generally confine construction noise to daytime weekday hours, with restrictions on early mornings and evenings. A zero-lot-line home means that noise travels straight into a neighbor’s living space, so we stage and cut within those windows and keep the loudest work in the middle of the day. A respectful schedule keeps code enforcement off your curb and your neighbors off your phone.
We walk the site before quoting and plan exactly where the truck, the glass rack, and the staging area will sit. On a shared-wall lot, we coordinate with the attached neighbor so the driveway and the shared walkway stay clear. If the job requires a crane or lift, we plan our morning setup to stay inside Sweetwater’s noise ordinance hours and finish the loud work before the afternoon rains roll in.
Yes. Sweetwater is in Miami-Dade County, and replacement windows and doors require a permit that demonstrates NOA compliance. TruePane pulls the permit on every job where a permit applies, and we get it issued before we touch the opening. We do not hand you a stack of forms and wish you luck. Call (813) 320-9346 for a free estimate, and we will tell you exactly what the permit path looks like for your specific house.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sweetwater and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After