Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Hollywood
Energy-efficient window replacement in Hollywood runs $850-$2,900 per opening for HVHZ-approved, low-E argon-filled units, and most full-home projects take 2-4 days once the product approvals clear. That’s the honest range here, because Hollywood sits inside Florida’s High-Velocity Hurricane Zone and every opening has to meet wind-borne debris standards that a generic “Florida Approved” sticker won’t cover. We’ve worked Hollywood’s CBS ranch homes and beach-corridor condos long enough to know which manufacturer lines clear inspection on the first pass, and which ones will bounce back. Call (813) 320-9346 for a free estimate with line-item pricing in writing.
Key Takeaways:
- Hollywood requires HVHZ product approval numbers, not just Florida Product Approval, on every replacement window
- Low-E argon-filled units in Hollywood run $850-$2,900 per opening installed, depending on frame type and opening condition
- Salt-air corrosion east of Dixie Highway often means jamb rebuilds before new glass can be set
- Original jalousie windows in 1950s-70s CBS ranches have no frame to accept an impact-rated replacement - the opening gets reframed
- We register both manufacturer warranty layers in writing before the truck leaves your Hollywood driveway
Why TruePane Windows & Doors Is Hollywood’s Preferred Energy-Efficient Windows Company
We’re the crew Hollywood homeowners call after a competitor bids a unit that won’t pass HVHZ review. Our Energy-Efficient Windows team has pulled too many “Florida Approved” sashes out of Hollywood openings to count, and we know which thermal-rated impact substitutes actually match the visible transmittance you’re replacing. Dale Kessler founded this company on a rule that fits Hollywood better than most markets: if the pane is not true, the job is not done.
Homeowners in Hollywood Hills, West Hollywood, and along the beach corridor have called us for years because we quote manufacturer lines side by side on paper, with model numbers, U-factors, SHGC ratings, and the HVHZ approval number printed next to each option. That’s not something every window company in Hollywood does. It’s the reason our customers from Polk Street to A1A tell their neighbors we’re the last call they needed to make.
We’re not the cheapest bid in the room, and we won’t pretend to be. But we’re the company that shows up in uniform, measures every rough opening twice, pulls permits when the job requires them, and registers both warranty layers in writing under The Keystone Standard. A live person answers our phone 24 hours a day, seven days a week - not a phone tree, not a regional call center. When you call about your Hollywood home, you get someone who knows what a CBS wall does to a window jamb.
Our Energy-Efficient Windows Services in Hollywood
Low-E & Argon Gas Glass
Low-E coated glass with argon gas fill is the baseline for energy efficiency in Hollywood, but the coating matters differently here than it does in Davie or Pembroke Pines. Hollywood’s afternoon sun off the Atlantic pushes west-facing windows hard, so we spec low-E coatings with the right SHGC for the orientation of each room. A west-facing living room on Polk Street needs a different coating than a north-facing bedroom in Hollywood Hills. We quote both, side by side, so you see exactly what you’re buying.
ENERGY STAR Replacement Windows
ENERGY STAR certifies thermal performance, but in Hollywood that certification alone won’t get you past final inspection when hurricane season rolls around. The unit also needs an HVHZ product approval number. We order ENERGY STAR-rated units that carry both certifications, and we print the approval documents for your records before anything goes into your wall. That’s the difference between an upgrade and a replacement that actually passes code in Hollywood, FL.
Double & Triple Pane Windows
Double-pane insulated glass is standard for Hollywood’s CBS ranches and beach condos. Triple pane exists, and we install it, but for most Hollywood homes the second pane buys you more than the third one ever will, once you account for our humidity and salt exposure. We’ll show you the U-factor math on both, and we’ll tell you honestly when triple pane is overkill for your opening. Most Hollywood homeowners with original single-pane aluminum or jalousie units see the biggest jump going to double pane with argon, not chasing a third layer.
UV-Blocking & Fade Protection
Hollywood’s sun is not subtle. Furniture, flooring, and artwork within eight feet of an east- or west-facing window fade noticeably within two to three years. UV-blocking low-E coatings cut that fading measurably while still letting in daylight. For Hollywood Beach condos with wall-to-wall glass facing the water, we spec coatings that knock down UV transmission without turning the view gray. You get fade protection without losing the reason you bought a beach-facing unit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollywood
We’re authorized installers for more than a dozen manufacturer lines, including Andersen, Pella, Marvin. That matters in Hollywood because not every line carries HVHZ product approval numbers across its full catalog. When a brand you like doesn’t have an approved unit for your opening, we substitute a visible-transmittance-matched alternative and show you the approval paperwork before you sign. We keep thermal-rated, impact-certified stock accessible for Hollywood jobs so we’re not waiting on a slow freight line to start your replacement.
Common Energy-Efficient Windows Problems We See in Hollywood Homes
- Salt-pitted aluminum frames east of Dixie Highway. Ocean air attacks aluminum sash channels here harder than anywhere inland, and by year 15 or 20 the frame is pitted, seized, and pulled away from the CBS wall. You can’t set a new insulated glass unit square in a corroded jamb. We rebuild the opening first, then set the window.
- Jalousie windows that can’t be insulated. Those original crank-out glass slats in Hollywood’s 1950s-70s ranches have no structural frame, no thermal break, and no way to accept an impact-rated replacement. The entire opening gets reframed before any low-E unit goes in. This is the single most common upgrade we do in Hollywood Hills and West Hollywood.
- Fogged double-pane seals that started as upgrade attempts. We see plenty of double-pane windows in Hollywood that were installed ten years ago and already fog between the panes. That fog means the argon leaked out and the U-factor is shot. The fix is a replacement unit, not a reseal, and we check the existing frame for the same salt damage before we quote it.
- Spalled rough openings hidden behind old sliding doors. Beach-corridor condos along Hollywood Beach often have sliding glass doors embedded in concrete with degraded flashing tape behind them. When we cut out the old door, the concrete opening is spalled - crumbling, flaked, no longer square. That rough opening has to be patched and re-flashed before a new energy-efficient frame can be set properly.
Pricing for Energy-Efficient Windows in Hollywood, FL
Here’s what Hollywood homeowners can expect to pay, based on the jobs we’ve completed here:
| Job Type | Typical Hollywood Range |
|---|---|
| Low-E, argon-filled double-pane (HVHZ approved) | $850-$1,400 per opening |
| Impact-rated low-E casement (for jalousie replacement) | $1,600-$2,500 per opening |
| Full jalousie-to-impact-casement reframe | $2,200-$2,900 per opening |
| Marine-grade fiberglass frame (beach corridor) | $1,400-$2,300 per opening |
| UV-blocking low-E coating upgrade | $120-$280 per window |
The single biggest cost driver in Hollywood is what’s behind the old window. If the jamb is salt-corroded or the rough opening needs reframing, the price moves toward the top of the range. If the opening is clean CBS block and we’re doing a straight sash swap, you’ll land near the bottom. We give you a written, line-item quote before any work starts, with no change orders unless you change the scope. Call (813) 320-9346 and we’ll measure your Hollywood openings and give you real numbers.
We Also Serve Cities Near Hollywood
Our crews work throughout South Florida, including Hollywood, North Miami Beach, Fort Lauderdale, Miami Gardens, and Plantation. Scheduling is coordinated from our Miami office, but the crews that show up at your door are local to the Hollywood area and know the housing stock and permitting quirks here. If you’re in a neighboring city and facing the same HVHZ and salt-air issues, call the same number and we’ll send someone who knows your block.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Hollywood
Because Hollywood sits entirely within the High-Velocity Hurricane Zone, which requires every window and door product to pass independent missile-impact testing and carry an HVHZ-specific approval number. A unit listed as “Florida Approved” but without that HVHZ number will not pass inspection in Hollywood, and any contractor who quotes it is gambling with your permit. We check the approval number on every unit before we order it, and we hand you the paperwork in writing. Call (813) 320-9346 if you want us to verify what’s already in your home.
Full frame replacement. Jalousie windows have no structural frame that can accept an insulated glass unit, and pitted, seized hardware means the opening itself has been compromised by years of salt intrusion. We pull the entire jalousie assembly, reframe the rough opening with pressure-treated blocking, flash the sill with butyl tape, and set an impact-rated, low-E replacement. A patch job won’t hold in Hollywood’s air, and it won’t pass code. We’ll show you the opening once we’ve opened it, so you see exactly what we’re working with before we set anything.
If you see fog or condensation between the panes, the seal has failed and the argon gas has leaked out. Your window’s U-factor is now roughly the same as a single pane, and no amount of cleaning fixes it. The unit needs replacement, not repair. In Hollywood, we also check the frame around the fogged unit for salt corrosion, because a failed seal often means the frame channels are compromised too, and setting a new unit into a corroded jamb just repeats the problem in a few years. We’ll test the frame and quote the full scope before we order anything.
Yes, and measurably. Jalousie windows in a CBS ranch leak conditioned air around every slat and offer almost no insulation value. Swapping them for sealed, low-E, argon-filled impact units typically cuts the heat load on west-facing rooms enough that the AC stops short-cycling. On one Polk Street ranch in Hollywood Hills, we dropped the afternoon heat load in the living room enough for the homeowner to keep the blinds open in August. Exact savings depend on orientation and existing insulation, but the improvement is real and you’ll feel it in the first month. Call (813) 320-9346 for a free estimate and we’ll walk your house and point out where the losses are.
You need marine-grade or extruded fiberglass/PVC frames, not standard aluminum. Hollywood Beach and the corridor east of US-1 get Atlantic salt air that pits and seizes standard aluminum hardware ten to fifteen years earlier than inland homes. We’ve pulled 1990s aluminum sliders out of beach condos with channels so corroded the sash wouldn’t lift. Marine-grade frames cost more up front, but they’re not an upsell in Hollywood - they’re the only option that survives the environment. We’ll show you the corrosion on the old frame before we quote the replacement.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hollywood and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.