Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Plantation Mobile Home Park
Sliding and patio door replacement in Plantation Mobile Home Park costs between $1,200 and $4,800 depending on whether you need a standard HUD-code unit or a custom-ordered impact-rated system for a non-standard opening. Most jobs here take one to two visits because our crews measure twice, order the right unit for your specific rough opening, and return to install without leaving gaps that leak during South Florida squalls. We’re a phone call away at (813) 320-9346, and a live person answers at any hour.
Plantation Mobile Home Park isn’t a typical subdivision, and the door work here isn’t typical either. Every unit in this community is a HUD-code manufactured home, which means wall depths run two to three inches instead of the six-plus inches you’d find in a stick-built house. Standard residential sliding doors simply don’t fit. We know this because we’ve measured enough openings here to understand the pattern: older single-wides with original jalousie or aluminum-frame sliders, newer double-wides with rough openings that no longer match any catalog size. That’s the work we do.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 after years of watching out-of-true installs and voided warranties leave homeowners holding the bag. The rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done. In Plantation Mobile Home Park, that rule gets tested on every job because the wall assemblies are thinner, the wind-load standards are stricter, and the consequences of a sloppy flash-and-seal are immediate. Water finds a gap fast in this climate.
Our technicians arrive in uniform, background-checked, and prepared to measure every opening twice before anything gets ordered. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. We register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every door we install in Plantation Mobile Home Park.
We’ve replaced corroded aluminum sliders on SW 54th Street, retrofitted double-wides with impact-rated systems, and helped owners navigate the DHSMV requirements that most general contractors don’t even know exist. Our Sliding & Patio Doors team handles the full scope, from single-door replacements to panoramic systems that open a living room to the yard. Homeowners in Plantation Mobile Home Park call us because we speak the language of this housing stock, not because we were the lowest number on the estimate.
Our Sliding & Patio Doors Services in Plantation Mobile Home Park
Patio Sliding Doors
A patio sliding door in Plantation Mobile Home Park has to do two jobs at once: open smoothly for daily use and hold its seal against wind-driven rain that comes sideways off the Atlantic. The original aluminum units on older homes in the park fail at the corners first, where the frame oxidizes and the rollers bind. We replace them with units sized for the actual rough opening, not whatever the big-box store has on the shelf. Most patio slider replacements here run $1,200 to $2,800 installed, depending on whether the opening is standard or requires custom ordering.
Panoramic Sliding Systems
Some of the newer double-wides in Plantation Mobile Home Park have been upgraded with wide living-room openings that deserve more than a basic two-panel slider. Panoramic sliding systems use multi-panel configurations to open a wall, but on a manufactured home the engineering has to account for the thinner wall cavity and the wind-load rating the state requires. We’ve installed these on units where the owners wanted to open the entire rear of the home to a screened porch. A three-panel panoramic system with impact-rated glass typically runs $3,500 to $6,500 here, and the permit and inspection paperwork is part of the job.
Heavy-Duty Sliding Doors
Heavy-duty sliding doors matter in Plantation Mobile Home Park because the standard residential units marketed to site-built homes can’t handle the torque and flex that a manufactured home’s wall transmits during high wind. A heavy-duty door has a reinforced frame, heavier track hardware, and laminated glass that meets DHSMV requirements for the high-velocity hurricane zone. For older units in the park that still have original single-pane aluminum sliders, a heavy-duty replacement is often the difference between a door that survives the next storm and one that becomes a water entry point. Expect $1,800 to $3,800 for a proper heavy-duty install here.
Pocket & Barn Doors
Pocket and barn doors solve a real problem in manufactured homes: swing doors eat floor space that these floor plans can’t spare. But pocket doors in a two-inch wall cavity require a different frame kit than what’s sold for stick-built construction. We source the right hardware and install the pocket assembly so the door travels true and doesn’t scrape the wall. Barn doors on manufactured homes need a header mounted to the wall studs correctly, which is a smaller job but one that fails fast when someone hangs the track on drywall anchors. Pocket door retrofits here typically run $900 to $2,200 depending on wall access.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
We’re an authorized installer for more than a dozen manufacturer lines, and for Plantation Mobile Home Park work we lean on Andersen, and Pella because those companies produce glass and frame combinations that can be engineered for manufactured-home openings. ViewLux in particular has become a go-to for this park because their fusion-welded frames hold a seal longer in the UV-heavy, humidity-soaked environment here. We stock common rollers, handles, and track components so a repair visit doesn’t turn into a two-week parts wait. If your brand isn’t listed, call anyway. We service what we can source correctly, and we’ll tell you straight if a given unit isn’t worth repairing.
Common Sliding & Patio Doors Problems We See in Plantation Mobile Home Park Homes
- Corroded aluminum tracks and seized rollers. The combination of salt-laden humidity and intense UV means aluminum frames oxidize faster here than almost anywhere in the state. By the time the door won’t slide, the track corners are usually pitted and the rollers are flat-spotted. A track replacement is required, not a quick lube job.
- Jalousie-style patio doors that can’t be repaired in-kind. Older single-wides in the park still have louvered glass sliders, and Florida’s mobile home rules don’t allow a like-for-like replacement. A broken louver forces a full HUD-compliant retrofit, which catches owners off guard when they expected a simple glass swap. We walk you through the retrofit process and the compliance paperwork that goes with it.
- Non-standard rough openings. We measure dozens of Plantation Mobile Home Park doors a year and the same pattern shows up: original openings at 73 3/4 inches, 74 1/2 inches, 76 inches. None of those match today’s standard manufactured-home replacement sizes. A cheap off-the-shelf door leaves gaps. A custom-ordered unit fits and seals.
- Failed seals that let wind-driven rain inside. When a sliding door seal blows on a manufactured home, the water doesn’t just puddle at the threshold. It gets driven into the thinner wall cavity and shows up as a soft floor near the door. That’s the repair bill no one budgets for. Replacing the door and properly flashing the opening is the only real fix.
Pricing for Sliding & Patio Doors in Plantation Mobile Home Park, FL
A standard patio sliding door replacement in Plantation Mobile Home Park runs $1,200 to $2,800. Panoramic multi-panel systems land between $3,500 and $6,500. Heavy-duty impact-rated sliders run $1,800 to $3,800, and pocket or barn door retrofits cost $900 to $2,200. The factors that move the number: rough opening size, whether the unit must be custom-ordered, the wind-load rating required for your specific lot, and the condition of the surrounding wall framing once the old door comes out. We give line-item quotes in writing, and the price doesn’t change once work starts unless you change the scope. Call (813) 320-9346 for a free estimate. A live person answers, any hour.
We Also Serve Cities Near Plantation Mobile Home Park
Our crews work throughout the surrounding area, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live in one of those communities and need the same manufactured-home door expertise, call the same number. We schedule from our South Florida office and dispatch locally, so the crew that shows up knows the housing stock and the code requirements.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Plantation Mobile Home Park
Yes. Plantation Mobile Home Park sits in the same high-velocity hurricane zone as West Palm Beach, but because every home here is a HUD-code manufactured unit, the governing standard is Florida’s Department of Highway Safety and Motor Vehicles (DHSMV) mobile-home wind-load requirements rather than the Florida Building Code used for site-built houses. A door that’s rated for a site-built home may not be compliant on your manufactured home. We specify the correct rating for your exact lot and unit, and that documentation is part of what we hand you at the end of the job. Call (813) 320-9346 and we’ll walk you through what your specific unit requires.
You have to change the whole unit. Florida mobile home rules do not allow in-kind replacement of jalousie-style patio doors, which means a broken louver triggers a full HUD-compliant retrofit. That sounds like bad news until you see what it actually gets you: a sealed, impact-rated door that insulates and meets wind-load standards, instead of a louvered panel that leaks and offers no storm protection. We handle the retrofit, the permit paperwork, and the inspection. Call (813) 320-9346 and we’ll explain what the process looks like on your specific unit.
It gives your claim a paper trail. When your door carries documented DHSMV wind-load compliance, you can show the insurer that the opening was engineered for the storm conditions your home actually faces. Without that paperwork, the insurer may argue the door was improperly specified or installed, which complicates or reduces the claim. We register both warranty layers and provide the compliance documentation on every door we install in Plantation Mobile Home Park. If you’re replacing a door now, get the documentation right the first time. Call (813) 320-9346 for a free estimate.
A compliant quote includes the DHSMV wind-load rating for your specific unit, a door engineered for the two-to-three-inch wall cavity, flash-and-seal work that prevents water intrusion, permit filing, and the inspection that closes out the paperwork. A cheap quote typically skips the permit, uses a stock residential door with a standard rough opening, and doesn’t address flashing at all. You find out the difference during the next summer squall when water is inside the wall. We quote line items in writing. Call (813) 320-9346 and we’ll show you exactly what’s in our number.
It depends on the frame. If the track is jammed because rollers are worn and the handle is corroded but the frame corners are still sound, a roller and handle replacement is a straightforward repair that runs $250 to $600. If the aluminum frame corners are pitted or the door has blown its seal, you’re better off replacing the whole unit. On older units in this park, we usually find the frame oxidation has spread far enough that a repair buys you six months, not six years. We’ll tell you straight what we find. Call (813) 320-9346 and we’ll come look.
Get Your Sliding & Patio Doors Done Right in Plantation Mobile Home Park
If you own a manufactured home in Plantation Mobile Home Park, you already know the difference between a contractor who understands HUD-code construction and one who’s guessing. We measure every opening twice. We quote manufacturer lines side by side on paper. We register both warranty layers before the truck leaves. And if it’s not done right, the 90-Day Done Right Promise means we make it right, no arguing. Call (813) 320-9346 to schedule your free estimate. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.