Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Plantation Mobile Home Park
Door installation in Plantation Mobile Home Park is not a standard job, and treating it like one is how homeowners end up with doors that bind, jambs that rot, and wind inspections that fail. A replacement door for a HUD-code manufactured home here has to fit a wall cavity that is typically only 2 to 3 inches deep, meet DHSMV wind-load standards, and hold up against South Florida humidity. TruePane Windows & Doors has spent years doing this work the right way, and our crews know the difference between a mobile-home rough opening and a site-built one. If you need a door that fits, seals, and stands up to the next storm, call (813) 320-9346 for a free estimate.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Door Installation Company
Homeowners in Plantation Mobile Home Park call us because we understand what they are working with. Virtually every unit in this community is a manufactured home, which means the door work here is a different trade than what most residential contractors practice. We have been repairing and replacing doors in HUD-code units long enough to know that a standard 6-inch site-built door frame does not belong in a 3-inch mobile home wall. Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. That is Dale Kessler’s rule: if the pane is not true, the job is not done.
Background-checked, uniformed technicians show up when we say they will, and a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form. We stand behind every install with the 90-Day Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers are registered in writing, durations stated, and workmanship is guaranteed for 90 days with no paperwork fights. If something is not done right, we make it right. That is the whole promise.
Our Door Installation Services in Plantation Mobile Home Park
Most door jobs in Plantation Mobile Home Park fall into a few categories, and each one has its own set of code and fit requirements. Here is what we handle most often, and what each job looks like in a manufactured home.
Entry & Swing Doors
An entry door on a mobile home in Plantation Mobile Home Park has to do three things at once: seal against humidity, anchor into a thin wall, and hold its rating in a wind event. We install impact-rated entry systems built for mobile-home wall depths, with HUD-approved sill pans and engineered jambs. No shimming with untreated lumber, no exposed jambs, no surprises after the first tropical storm.
Double & French Doors
Double and French doors are popular in Plantation Mobile Home Park, usually for carport entrances or living room openings that used to hold a folding door. The challenge is the same: a 6-foot opening in a wall that is only 3 inches thick. We source French door systems with jamb kits specifically engineered for shallow manufactured-home walls, and we pull the permit every time. A French door is not a place to cut corners.
Bifold & Folding Doors
Older units in Plantation Mobile Home Park often have multi-panel folding doors between the living space and carport or utility room. When those fail, homeowners usually want the opening converted to a swing or French door. Our team has done dozens of these conversions here, and we know which framing adaptor kits work for HUD-code openings and which ones will not survive a wind inspection.
Pivot Doors
Pivot doors are a bigger project, and in Plantation Mobile Home Park they almost always require custom engineering. A pivot hinge transfers the door’s weight differently than a butt hinge, and in a thin mobile home wall that load path matters. We quote pivot doors only after verifying the wall structure can carry the load, and we do it with manufacturer lines side by side on paper so you see exactly what you are buying.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
We are an authorized installer for more than a dozen manufacturer lines, and for Plantation Mobile Home Park work we tend to recommend products that are actually rated for HUD-code wall depths. Jeld-Wen makes an impact-rated entry system built specifically for mobile-home installations, and we have installed it throughout the community, including on older single-wides with corroded aluminum frames. Andersen and ES Windows both carry product lines that adapt well to shallow manufactured-home openings. We keep documentation for every install so wind mitigation paperwork is on file, not lost in a drawer.
Common Door Installation Problems We See in Plantation Mobile Home Park Homes
These are the failures we see repeatedly in this community, and all of them are preventable with the right product and the right install.
- Site-built door frames jammed into 2-inch walls. A standard 6-inch-deep frame protrudes past the wall, leaves the jamb exposed, and does not anchor to wind-load spec. In a tropical storm, that door can fail. We replace these with HUD-compliant framing built for the actual wall depth.
- Rot behind poorly flashed jambs. South Florida humidity and driving rain wick behind unflashed jambs, and within two years the threshold and subfloor rot and the door sags out of square. We install sill pans and flashing tape on every exterior door, without exception.
- Reusing the original non-rated jamb. A cheap door-only replacement often keeps the old jamb, which cannot hold a wind-load rating. The DHSMV inspection fails, the insurance renewal gets held up, and the homeowner ends up paying for the job twice. We replace the full opening assembly, never just the slab.
- Fogged glass after a storm door install. Between-pane fogging is not normal, and in Plantation Mobile Home Park’s humidity it signals a failed seal. We register both warranty layers on every install, so if a seal fails, you have paperwork that says exactly who covers it and for how long.
Pricing for Door Installation in Plantation Mobile Home Park, FL
A standard entry door replacement in Plantation Mobile Home Park typically runs $1,100 to $2,400, depending on whether the jamb can be salvaged or the full opening needs reframing. A properly flashed and permitted storm door install runs $700 to $1,500. Double or French door conversions from a folding-door opening usually land between $2,800 and $5,200, because the header and jamb kit have to be engineered for a 3-inch wall. Pivot door projects start around $4,000 and go up from there based on size and engineering. The biggest cost driver is whether the existing opening is HUD-compliant or needs a full retrofit. Call (813) 320-9346 for an exact quote. Estimates are free, and we put every line item on paper before any work starts.
We Also Serve Cities Near Plantation Mobile Home Park
TruePane’s crews work throughout the surrounding area, including door installation in Plantation Mobile Home Park and the nearby communities of Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are in any of these areas and need a door that fits, seals, and holds its wind rating, call us. We coordinate scheduling from our South Florida office, and our crews serve Plantation Mobile Home Park locally.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Plantation Mobile Home Park
Yes, a permit is required for any exterior door replacement in Plantation Mobile Home Park, even a like-for-like swap. Manufactured homes fall under DHSMV jurisdiction rather than the standard Florida Building Code, and the department requires wind-load documentation on any exterior opening change. A contractor who tells you no permit is needed is setting you up for a failed inspection and an insurance problem later. Call (813) 320-9346 and we will pull the permit as part of the job.
Yes, that conversion is possible in Plantation Mobile Home Park, but it is not a simple door swap. The opening needs a HUD-compliant jamb kit engineered for a 3-inch wall, a header that carries the greater span, and impact-rated glazing. We have completed this exact conversion throughout the community, including on 1970s single-wides in the Dogwood loop, and the finished door passes wind mitigation inspection. Call (813) 320-9346 for a free estimate and a written line-item quote.
No, that is not normal, and it signals a failed seal. In Plantation Mobile Home Park’s humidity, a failed seal allows moisture into the airspace between the panes, and the glass will fog repeatedly. The fix is a replacement sash or door, and that is why we register both manufacturer warranty layers in writing on every install. If a seal fails under warranty, the paperwork says who covers it and for how long. Call (813) 320-9346 to schedule an inspection.
You can replace the door only. DHSMV rules do not force a homeowner to retrofit windows just because a door is being replaced, and there is no blanket requirement to fix all jalousie openings at once. That said, jalousie doors and windows have no meaningful hurricane resistance, and many homeowners in Plantation Mobile Home Park choose to phase the work, starting with the door because it is the primary entry and egress point. Call (813) 320-9346 and we will walk you through the priorities and the costs for each phase.
Your mobile home insurance company in Plantation Mobile Home Park may require proof of wind-load compliance as a condition of renewal, especially after a claim or an inspection. If you have a compliant door install with documented DHSMV approval, you can submit that paperwork to show the opening meets current standards. Without it, the insurer may deny coverage or require a retrofit before renewing the policy. We keep full documentation on every install, so the paperwork is available when you need it. Call (813) 320-9346 for a free estimate and we will explain exactly what documentation you will receive.
Call TruePane Windows & Doors for Door Installation in Plantation Mobile Home Park
If you live in Plantation Mobile Home Park and need an entry door, storm door, French door, or a full opening retrofit that will pass DHSMV inspection, call (813) 320-9346. We will send a background-checked, uniformed technician who measures twice, quotes manufacturer lines side by side on paper, and registers both warranty layers before the truck leaves. Our 90-Day Done Right Promise covers every job, and a live person answers the phone 24 hours a day, 7 days a week. The ask is simple: a free estimate, a written line-item quote, and a door that is done right the first time. Call (813) 320-9346 to schedule yours.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park and surrounding communities with manufactured-home door expertise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.