Sliding & Patio Doors in Sunrise - Free In-Home Measure, Written Price

Fast, Reliable Sliding & Patio Doors Across Sunrise

Sliding patio door replacement in Sunrise, FL typically costs $2,800-$6,500 for a standard impact-rated unit, installed, and most jobs we complete in a single visit once the permit clears. That’s the number homeowners here need to hear first, because Sunrise falls entirely inside Broward County’s High Velocity Hurricane Zone, and the code requirements drive both the product choice and the price. We’re TruePane Windows & Doors, and we’ve worked these neighborhoods from Pine Island Road to Nob Hill Road long enough to know exactly what a Sunrise inspector will look for when the wall gets opened up.

Call (813) 320-9346

If your original slider is fogged, dragging, or original to a 1970s CBS home, call (813) 320-9346 for a free estimate. We measure twice, quote side by side on paper, and register both warranty layers before our truck leaves your driveway.

Why TruePane Windows & Doors Is Sunrise’s Preferred Sliding & Patio Doors Company

Most of our Sunrise customers are people who’ve lived in the same house for twenty or thirty years. They remember the last contractor who swapped a door and left the flashing wrong. They call us because we’re the same crew that fixed their neighbor’s jamb along Pine Island Road, and because the work holds up. Our Sliding & Patio Doors team carries the same Keystone Standard on every Sunrise job: both manufacturer warranty layers registered in writing, durations stated, before we pack up the tools.

We answer the phone with a live person, 24 hours a day. Not a voicemail tree, not a callback form. When a Sunrise condo board needs documentation for an HVHZ permit, we hand over the NOA paperwork without a runaround. Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That’s why Sunrise customers keep our number taped inside the kitchen cabinet.

Our technicians are background-checked and uniformed. They work in your home the way they’d work in their own mother’s. And we hire local, train apprentices into journeymen, and plan to be in this town in thirty years. Sunrise is not a territory to us. It’s the next street over.

Our Sliding & Patio Doors Services in Sunrise

Patio Sliding Doors

Standard patio sliders are the backbone of most Sunrise homes, especially the CBS ranchers built between 1965 and 1990. When a Sunrise homeowner calls us about a patio door that binds in July or whistles during a storm, what we usually find is an original aluminum unit with no impact rating and no Miami-Dade NOA. Under Broward’s HVHZ code, that door cannot be repaired. It gets replaced with a NOA-approved impact-rated unit, and we rebuild the jamb and flashing to match what the inspector wants to see.

Panoramic Sliding Systems

Wide, multi-panel glass systems are becoming more common in Sunrise’s newer townhome enclaves and the renovated condo units around the Nob Hill Road corridor. These systems are heavy, and they demand exact framing. An opening that’s off by a quarter inch turns into a panel that won’t seat and a seal that fails in two years. We measure every opening twice and order the system to the manufactured size, not to what the old door happened to be.

Heavy-Duty Sliding Doors

Some Sunrise condo associations specify reinforced sliders for ground-floor units facing the parking lot or a canal. These doors carry thicker glass, heavier frames, and stricter anchoring requirements. Installation is not a one-for-one swap. We pull the old door, inspect the concrete block around the opening, and replace undersized anchors with code-mandated hardware. If the framing behind the stucco has started to rot from years of salt-laden air, we fix that before the new door goes in.

Pocket & Barn Doors

In Sunrise’s older condo floor plans, a pocket slider often separates a galley kitchen from a laundry closet. The problem is the pocket itself: rusted rollers, broken track clips, and wall cavities that were never sealed against humidity. We extract the old door carefully because the drywall around a pocket frame in a 1970s Sunrise unit has often absorbed decades of moisture. Then we replace the hardware and re-insulate the cavity so the next door rolls true.

Trusted Brands We Service in Sunrise

We’re an authorized installer for more than a dozen manufacturer lines, and for Sunrise work we lean on the brands that have proven themselves in HVHZ conditions: PGT, CGI, and Simonton are the three we quote most often because their impact-rated units hold Miami-Dade NOAs and their parts are readily available in South Florida. When a Sunrise customer needs a replacement roller assembly or a new weatherstripping set, we usually have the part on the truck or can source it from a local distributor within a day. We quote these manufacturer lines side by side on paper so you see exactly what you’re buying, not what we happen to have in the warehouse.

Common Sliding & Patio Doors Problems We See in Sunrise Homes

• Fogged glass and lost argon on original units. Salt-laden humid air from the Atlantic works on older insulated glass units hard. Within 10-15 years of installation, we routinely pull sliders in Sunrise where the seal has failed and the argon is gone, cutting the insulation value of the glass nearly in half.
• Corroded aluminum tracks that seize the rollers. The same salt that fogs the glass pits the aluminum. On a call along Nob Hill Road, our crew pulled an original 1981 aluminum sliding door from a condo unit and found the track so corroded the door hadn’t rolled properly in years.
• Doors with no Miami-Dade NOA that cannot legally be repaired. This is the one that catches Sunrise homeowners off guard. If the door predates Florida’s impact-glazing requirements and carries no NOA, the code does not allow a repair. The door must be replaced with an approved unit. There is no grandfather clause for a fogged 1978 slider.
• Undersized or rotted framing hidden behind the old door. In Sunrise’s older townhome and condo communities, the wood framing around an original slider has often been soaking up humidity for forty years. Once the door comes out and the inspector looks at the opening, rotted jambs or undersized headers become a permit-triggered upgrade, not an option.

Pricing for Sliding & Patio Doors in Sunrise, FL

We Also Serve Cities Near Sunrise

Our crews work throughout Sunrise and the surrounding South Florida communities. If you’re in Acacia Villas, Alafaya, Altamonte Springs, or Altoona and dealing with a failed slider or a permit-triggered replacement, we make the drive and bring the same inspection-first process with us. The code doesn’t change much at the county line, but the house details do, and we account for that at the first visit.

FAQs - Sliding & Patio Doors in Sunrise