Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Westgate
Custom Windows & Doors in Westgate typically runs $2,800-$7,400 for a standard impact-rated unit, and most jobs take one to two days once the door is on-site. Our team knows the CBS ranch homes off Westgate Avenue and the acreage parcels out past the county line, and we plan every job around Palm Beach County permitting and the wind-load rules that apply here. If you’ve got a fogged slider, a jalousie window bleeding rust into the door jamb, or a 1970s single-track that binds in July, call (813) 320-9346 for a free estimate. A real person answers, day or night.
Why TruePane Windows & Doors Is Westgate’s Preferred Sliding & Patio Doors Company
We’ve been working on Westgate homes long enough to know what holds up and what doesn’t. The concrete block construction that dominates this community is solid, but the window and door openings cut into that block in the 1950s and 1960s were sized for a different product era. Original aluminum sliders and jalousie windows don’t meet Palm Beach County’s current wind-load requirements, and patch repairs won’t change that. Our technicians measure twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway.
Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We hire local, train apprentices into journeymen, and show up in uniform with background-checked crews. Westgate customers get the same standard on a $300 repair or a $9,000 panoramic slider replacement: a square deal on pricing, no surprise line items, and a 90-Day Done Right Promise in writing.
Our Sliding & Patio Doors Services in Westgate
Our Sliding & Patio Doors team handles everything from single-track retrofits to full multiple-panel systems. Four services matter most in Westgate’s housing stock, and they’re covered below.
Patio Sliding Doors
Standard patio sliders are the workhorse replacement on Westgate’s single-story CBS homes. Most of these houses were built with a six-foot aluminum single-track door off the back patio or Florida room. Modern impact-rated replacements from Andersen, PGT, or ES Windows run wider, seal tighter, and meet current county wind-load code. We do full-frame Door Installation - Westgate rather than insert work on nearly every patio door, because the original rough openings are almost always undersized and the stucco around them needs re-patching anyway.

Panoramic Sliding Systems
For Westgate homeowners on larger lots, a panoramic sliding system opens the back of the house to the yard in a way a standard six-foot slider never will. Multi-panel systems with low-profile tracks and impact-rated glass give you ten to sixteen feet of clear opening. These jobs require structural header review, and on unincorporated county property that means plan review through Palm Beach County’s building department, not a city desk. We handle that paperwork as part of the quote.

Heavy-Duty Sliding Doors
On Westgate acreage, heavy-duty sliders are common on workshop entrances, detached garages, and pool enclosures. These openings are bigger, the panels weigh more, and the track hardware has to handle daily use in high humidity and salt air. We spec heavy extruded frames and stainless roller assemblies that won’t corrode the way the original zinc hardware did. If your outbuilding has a slider that’s come off its track more than once, that’s the unit we’d replace first.

Pocket & Barn Doors
Pocket and barn door conversions are growing in Westgate’s older homes because they free up wall and floor space that a swinging patio door ate up for fifty years. A pocket slider tucks into the wall cavity and disappears entirely. A barn-style door rides on an exterior track and works where a pocket isn’t possible because of blocking, wiring, or a septic line too close to the wall. Both get the same wind-load treatment: impact glass, reinforced frames, and county-compliant flashing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
We’re authorized installers for more than a dozen manufacturer lines, and most Westgate jobs use Andersen, ES Windows, or PGT products. That matters because these brands all carry Florida Product Approval, which Westgate requires under county code. We keep a rolling inventory of common track assemblies, roller kits, and weatherseal for these lines, which means a replacement part doesn’t have to ship from a distribution center before a repair can be scheduled. When you call for a quote, we’ll show you line-item pricing for at least two manufacturers side by side so you can see the difference in cost and warranty length before you decide. The 90-Day Done Right Promise applies to every install no matter which brand you choose, and both warranty layers get registered in writing before we leave the site.
Common Sliding & Patio Doors Problems We See in Westgate Homes
- Fogged insulated glass (IG) units from water splash. Homes with open drainage swales and no gutters get roof runoff splashing onto the bottom track of patio sliders every time it rains. That standing water works its way into the seal, the argon escapes, and within a few years you’re looking through fog. This is the single most common failure we replace in Westgate.
- Jalousie rust staining into slider jambs. The louvered jalousie windows so common on 1950s and 1960s Westgate homes leak wind-driven rain into the rough opening next to patio sliders. Over decades, that moisture rots the jamb, and if the jalousies sit directly beside the slider, the damage is usually hidden until the door starts binding.
- Narrow jambs that can’t take a modern impact frame. OEM single-track sliders from the 1970s were set into rough openings that are simply too narrow for today’s impact-rated units. A panel swap won’t solve it. The opening needs full-width stucco cutting, new bucking, and re-flashing to accept a code-compliant frame.
- Track wear on heavy-use doors. Westgate homes with pool access see hundreds of slider cycles a week during the summer. The original steel rollers wear flat spots, the track delaminates, and eventually the door jumps the rail. On an impact-rated door, a jumped track can leave you with an open six-foot hole in a storm.
Pricing for Sliding & Patio Doors in Westgate, FL
A standard impact-rated patio slider replacement in Westgate runs $2,800-$5,200 for a quality six-foot unit installed full-frame with stucco patching. Multi-panel panoramic systems start around $6,500 for an eight-foot opening and run $9,000-$14,000 for twelve to sixteen feet of clear opening. Heavy-duty sliders for outbuildings and workshops run $3,200-$6,800 depending on frame size and hardware grade. Pocket and barn conversions run $3,800-$8,200 because they involve structural opening work that standard replacements don’t.
Four things move the price on a Westgate job more than anything else: whether the rough opening needs widening for a modern frame, whether jalousie windows adjacent to the slider have compromised the jamb and need removal first, whether septic or well setbacks limit where a new opening can go, and whether your Citizens Insurance policy will require a wind-mitigation inspection after install. We’ll walk you through each line item on the quote so you know exactly what you’re paying for. Call (813) 320-9346 for a free, written estimate. No surprise add-ons, ever.
How Palm Beach County Permitting, Citizens Insurance, and Septic Setbacks Shape a Westgate Sliding Door Job
Westgate is unincorporated Palm Beach County, which means a sliding door replacement here follows a different set of rules than a job twenty minutes east inside a city’s jurisdiction. The county requires a permit for any structural door replacement where the rough opening changes or where you’re moving up to an impact-rated product. The 140-150 mph design wind speeds here are serious, but Westgate sits outside Miami-Dade and Broward’s High-Velocity Hurricane Zone, so products need Florida Product Approval rather than the stricter Miami-Dade NOA. That’s a meaningful break on product cost and availability, and it’s one of the reasons a Westgate impact-slider job typically runs less than the same job on the coast.
The insurance piece matters more here than almost anywhere else, and it’s the thing a generic patio door page never tells you. A large share of Westgate homeowners carry Citizens Insurance policies that require wind-mitigation credits to keep premiums manageable. Replacing an old slider with an impact-rated unit doesn’t just check the wind-mitigation box - it forces the inspection that documents it. We schedule that inspection for you right after install, and for many of our Westgate customers the premium reduction is large enough to offset the monthly financing cost of the door itself. It’s not a small line item; for a homeowner on a fixed income, it can be the deciding factor.
Then there’s the acreage side of Westgate. Homes out past the original core sit on larger lots with septic systems and wells, and those setbacks are real constraints the county enforces on permits. You can’t put a new sliding door opening within a certain distance of a septic tank, drainfield, or well head without triggering a health department review, and an outbuilding with a slider on the wrong side of the lot can throw your whole permit into delay. Our team checks the site plan before we quote so you don’t pay for a design the county won’t approve.
One recent job sticks with us. Our crew replaced a 1970s-era single-track aluminum slider in a CBS ranch near Westgate Avenue with a heavy-duty impact-rated sliding door from Andersen. The original jamb had severe seal failure - fog between the panes meant the argon was long gone - and the rough opening was undersized by modern standards, so we did a full-frame replacement with flashing tape, stucco re-patching, and a new insulated glass unit with low-E glass and argon fill. Because the homeowner had Citizens Insurance, we scheduled the wind-mitigation inspection right after install, and the premium reduction made the monthly financing work for them.
We Also Serve Cities Near Westgate
Our crews work throughout the surrounding area, and we regularly schedule estimates in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just outside Westgate’s core and your slider is fogged, binding, or leaking wind-driven rain, the same team that handles Sliding & Patio Doors in Westgate covers your neighborhood too.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Westgate
Yes, if you’re replacing the frame or switching to an impact-rated unit, Palm Beach County requires a permit because the rough opening and flashing details have to be inspected against current wind-load code. A simple panel swap on an existing impact-rated frame that doesn’t change the opening sometimes avoids a full permit, but those cases are rare on Westgate’s older homes. We pull the permit for you and close it out with the county inspection. Call (813) 320-9346 and we’ll tell you what your specific opening requires before you pay for anything.
In most cases, yes. An impact-rated slider is one of the largest single wind-mitigation credits available, and because Westgate sits in Palm Beach County’s 140-150 mph wind zone, the credit often reduces the premium enough to offset monthly financing on the door. The key is that the wind-mitigation inspection has to document the product after it’s installed. We schedule that inspection as part of the job so the credit hits your policy as soon as possible.
Jalousie windows cannot be brought into code compliance with film, and shutters over jalousies still leave the louvered glass assembly unrated. Palm Beach County code requires the glazing itself to carry a Florida Product Approval for the wind zone, and jalousies don’t. The only legal fix is full removal and replacement with impact-rated glass or infill. If your jalousies sit beside a sliding door, leaving them in place also lets wind-driven rain keep working into the slider’s rough opening, so fixing the door without fixing the jalousies usually means doing the job twice. We’ll point this out during the quote walkthrough, not after you’ve signed.
On most Westgate sliders from the 1970s and 1980s, you need a new door. The narrow single-track frames on those units don’t accept modern impact-rated insulated glass units, and the fog tells you the original seal failed, which means the frame’s drainage channel was never designed for this climate in the first place. On newer impact-rated frames where the seal fails under warranty, we do handle glass-only replacement. We’ll tell you honestly which situation you’ve got when we inspect the door. Estimates are free.
Palm Beach County’s health department requires minimum distances between any structural opening and the septic tank, drainfield, and well head. If your proposed sliding door falls inside those setbacks, the county won’t approve the permit without a variance or a redesign. We check the site plan before we quote so the door you’re paying for is a door the county will actually sign off on. Call (813) 320-9346 and we’ll walk your lot with you.
Get Your Free Sliding & Patio Doors Estimate in Westgate
If your Westgate slider is fogged, binding, leaking, or just showing its age, call TruePane for Window Installation - Westgate at (813) 320-9346. You’ll talk to a live person, not a voicemail tree. We’ll schedule a free estimate, measure every opening twice, and quote manufacturer lines side by side on paper so you see exactly what you’re buying. Every job carries the 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway. A square deal, done right, the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After